Countercurrent 1982

Chapter 383 tit for tat
"Comrade Duan Yun, you can't make your own opinion on this matter!" Jiang Jianhua's face darkened at this time, and he said to Duan Yun in a serious tone: "The matter of dismissing regular workers in the factory must be discussed by the workers' congress before it can be passed! "

"What? You mean that employees who seriously violate the factory rules cannot be fired?" Duan Yun frowned and turned to Jiang Jianhua and asked.

"I'm not saying that employees who violate the factory rules cannot be fired, but that this kind of thing must go through procedures!" Jiang Jianhua said with a bit of anger, "The current notice from the police station says that this case is under investigation. At the stage of investigation, the specific matters have not been clarified. Whether the nature of the mistakes made by Chen Daqiang and others is serious enough to be expelled from the factory, and whether there are other secrets is also unknown. If it is only a small mistake, it can be used. Criticize and educate to deal with it reasonably, as a manager, you cannot make the decision to expel Chen Daqiang and others from the factory just because they are temporarily detained, this is not in compliance with the regulations!"

"Small mistake?" Duan Yun snorted when he heard the words, raised his eyebrows and asked Jiang Jianhua: "Secretary Jiang, I went to the factory police station to record a statement last night, and there were also a large number of witnesses present at the time. Injured people, and seriously injured the police comrades present, is this a small mistake?"

"what!?"

As soon as Duan Yun finished speaking, everyone present was in an uproar.

According to Duan Yun, Chen Daqiang and his gang actually injured the police and hospitalized them. This is obviously not a trivial matter. No one thought that Chen Daqiang and his gang would be so courageous. The nature of this matter has changed. Well, attacking public security law enforcement officers, this is definitely not a simple public security case!
"Then this matter has to be studied by the workers' congress in the factory. Chen Daqiang and the others are not such people..." Jiang Jianhua said in a low voice.

"Touch!" Duan Yun slapped the table violently, and said to Jiang Jianhua with wide eyes: "Secretary Jiang, what do you mean? Please pay attention to your party membership! Speaking, are you trying to protect criminals and stand against the people by force!? For Chen Daqiang, a stubborn criminal who refuses to mend his ways and seriously endangers the lives of the people, you still want to protect him. Your thinking is dangerous and naive! Haven't you figured out where you stand!?"

"You..." Jiang Jianhua did not expect Duan Yun to dare to attack him so forcefully in front of the supervisors of dozens of departments in the conference room. If it's on the line, I'll follow the rules!"

"Since we are acting in accordance with the regulations, our factory cannot lightly deal with such serious crimes! Our factory is not an umbrella for criminals to hide their filth. According to factory regulations, any employee involved in a criminal offense must be dismissed. Any room for compromise!" Duan Yun's tone was extremely serious, and then he turned to Jiang Jianhua and said, "Secretary Jiang, you don't want to be an umbrella for criminals, do you?"

"Of course I won't be a protective umbrella..." Facing the 'protective umbrella' hat that Duan Yun suddenly put on, Jiang Jianhua secretly scolded Duan Yun for being cunning, but he would never admit it.

"Well, since Secretary Jiang is also jealous, then this matter is settled!" Duan Yun waved the notice in front of everyone again, and said: "Wait for the comrades in the Propaganda Department to work hard, and send Chen Daqiang and others The notice of expulsion from the factory was posted on the bulletin board, and I hope that everyone can take this as a lesson to avoid going astray in crimes! In addition, the task of each department today is to clean up the factory area and pave the road, and the meeting will be adjourned!"

Duan Yun waved his hand, got up and left the conference room.

"Duan Yun, stop!" Seeing Duan Yun leave, Jiang Jianhua followed Duan Yun out of the conference room.

"Secretary Jiang, what else do you need?" Duan Yun turned around and asked.

"Duan Yun, you have gone too far. This matter is endless. I will go to the main factory to report your work situation!" Jiang Jianhua said.

"Whatever you want, if you can sue me, you win." The corners of Duan Yun's mouth curled up, and he continued, "Secretary Jiang, why do you think you want to fight me? Or do you think I'm too young and you don't know me?" Convinced?"

"I'm talking about the facts!"

"Whatever you want to say, but I want to remind Secretary Jiang that you must pay attention to your personal safety when you go home at night. The public security has not been good in the past two years..." After Duan Yun finished speaking, he ignored Jiang Jianhua. Turned around and left.

"What do you mean!?" Jiang Jianhua yelled at Duan Yun, but the latter had already walked downstairs quickly.

In the morning, Duan Yun still organized workers to repair roads and modify machine tools.

At present, the automatic lathes and gear hobbing machines in the workshop have basically been refitted, and Duan Yun has already begun to design and convert the grinding machines in the workshop into gear grinding machines.

Before that, Duan Yun already had a corresponding design plan, and the drawings had been drawn, but the details of the modification still needed to be adjusted while the machine was running.

Duan Yun’s idea of ​​modifying the gear grinding machine is to reduce the lifting table of the gear grinding machine to the minimum. The measurement space is the range of grinding gear disc parts when the grinding wheel is at the maximum diameter. The parts need to be clamped on the disc table.

Design a bent plate that is strong enough to support the knife holder.Install the vertical bending plate on the plane of the working lifting platform of the machine tool.The knife rest is placed facing upwards, and connected to the disc table through the engagement of the support seat and the toothed disc.

Due to the direct installation and use of the tool holder, the height of the space between the machine tool lift table and the spindle grinding wheel is limited, and the range of processed parts will be reduced. In order to ensure the normal processing range of the machine tool, Duan Yun decided to add a set of passing tool holders after careful measurement and research yesterday. The pad transfer gearbox is connected to the hydraulic motor device, and the hydraulic part is changed to the side of the tool holder. The transfer device passes through the meshing between the gear shafts and transitions to another set of gears. The space is reduced from 513mm to 452mm, which meets the requirements of the machine tool. Requirements.

In order to improve the accuracy, Duan Yun uses the form of wedge iron to ensure the accuracy, and manually pulls the pull rod back and forth to achieve the action of dressing the grinding wheel in place.

In addition, Duan Yun also left space for the CNC function of this gear grinding machine in the future, but as far as the current situation is concerned, manual processing should be able to meet the production requirements of small batches in the early stage. If there are many orders in the later stage, Duan Yun A numerical control device will also be added.

Technical transformation must take into account the actual situation of the factory. Although CNC machine tools are efficient, they will also severely squeeze the jobs of factory workers. Therefore, instead of idling so many labor forces, Duan Yun might as well let them complete the gear grinding process manually to avoid manpower. Waste of resources...

(End of this chapter)