Countercurrent 1982

Chapter 721 CNC Machining Center
After Duan Yun stayed in Guangzhou for two days, he took care of all the things here, and then went to Xiamen by car.

At present, the person in charge of the Xiamen office is still Zhao Changfeng. After receiving the telegram that Duan Yun was coming, he also went to the train station to greet him in person.

After the two met, they immediately arrived at the Xiamen office in a rickshaw.

Compared with the Guangzhou office, the conditions of the Xiamen office are better. The 2-story building has a courtyard outside. Duan Yun bought the private property. Later, Duan Yun spent thousands of dollars to let Zhao Changfeng renovate the house here. It has been repaired and decorated, and office equipment such as tables, chairs, benches and beds have been added. The environment is very good.

A good working environment can make people feel happy, and Duan Yun is also a person who is not short of money, and this house has become his own private house, so he is not stingy with spending money on decoration.

Xiamen's climate and environment are very good, and it is also a place suitable for tourism. Duan Yun bought this house not only as an office, but also as his own vacation spot in the future, and brought Cheng Qingyan here to see the sea.

There are a total of seven or eight rooms here, and after learning that Duan Yun is coming, Zhao Changfeng has already cleared out the largest connected room on the second floor in advance. The inside is clean, with beds, sofas, radios and TV, and there are a few potted flowers by the window, obviously freshly watered, and under the sunlight, they look emerald green.

But Duan Yun didn't come to Xiamen for vacation and enjoyment. He still has important matters to explain to Zhao Changfeng.

"Manager Duan, this is the price list provided by Yuanfang Company, please take a look." At this time, Zhao Changfeng and Duan Yun were sitting face to face, and he took out a list from his bag and handed it to Duan Yun.

"Eh." Duan Yun nodded, took the list and read it.

During the Chinese New Year, Duan Yun, Zhao Changfeng, and Li Guosheng had a meal together, during which Duan Yun handed Zhao Changfeng a list of products, most of which were integrated circuit chips that were in short supply in China and high-end machine tools that were prohibited from being sold abroad. Parts, let him see if they can be bought in Xiamen.

In fact, although the mainland and the other side are in a state of hostility at this time, there are a lot of non-governmental exchanges. Many Taiwan compatriots return to the mainland to visit relatives or do business. Xiamen is the most important port for China Unicom.

In addition to the fact that some fishermen in the coastal ports obtain household appliances and other commodities that are in short supply in the mainland through special channels, there are also some companies with regular brands that have been doing some gray business. They can obtain a lot of more advanced things through some special channels. , and this is an important reason why Duan Yun chose to set up an office here.

After the establishment of the Xiamen office last year, Zhao Changfeng promoted Duan Yun's products in surrounding provinces and cities on the one hand, and on the other hand he was familiar with the local environment. Now he has basically figured out many gray channels around Xiamen.

Duan Yun has no interest in reselling smuggled electrical appliances. What he needs is advanced equipment and technology from the other side. Of course, such things are strictly blocked, and it is impossible to buy them even at high prices.

"Yongjin Machining Center... the price of a full set is 120 million..."

When Duan Yun saw item 1 on the list, he was stunned in surprise.

In this era, 120 million yuan is definitely a very large number, which is already equivalent to the total profit of some medium-sized state-owned enterprises for a year. Nowadays, ordinary lathes in China are only about 3 to 5 yuan, and they are still of high quality. The best and latest lathe products.

Of course, the ex-factory price of this CNC machining center must be far lower than the price of 120 million yuan, but considering the acquisition methods and risks, no one will do this business without high profits.

In addition to the price, Duan Yun was even more surprised that Xiamen Yuanfang Company could actually buy a complete set of CNC lathes, especially in the case of the strict blockade on the other side, which sounds unbelievable.

"I heard the person in charge of Yuanfang Company tell me that this Yongjin CNC machining center is a new product just released by the other side last year. The current output is only a few hundred units. The quality is definitely not as good as the latest lathes in Europe, America and Japan, but it is not bad. Much better than our domestic lathes..." Zhao Changfeng said to Duan Yun from the side.

"Is there any product introduction for this machine tool?" Duan Yun asked.

"This is the product manual provided by Yuanfang Company." Zhao Changfeng took out another manual from his bag and handed it to Duan Yun.

After Duan Yun took the manual, he immediately flipped through it carefully.

"...This CNC machine tool is not bad, it is indeed much better than domestic ones." After a while, Duan Yun nodded and said.

In fact, Duan Yun also knows that it is almost impossible to buy such high-precision CNC machine tools from Europe, America or Japan. Relatively speaking, buying Taiwan machine tools with lower quality is also an option.

In fact, the quality of Taiwan's automatic machine tools is only slightly inferior to that of Japan, Europe and the United States. In the early years, Taiwan's development of CNC lathes started later than that of the mainland, and its manpower and material resources were far inferior to those of the mainland.

But Taiwan has a huge advantage, that is, they can purchase some key components from Japan, and learn from Japanese technology while using them. Therefore, the CNC machine tools in Taiwan have developed rapidly, and it only took a few years Time has left the mainland's machine tool technology behind by a large margin.

At present, there are more than 50 various machine tool factories in Taiwan, and the three strongest companies are Yongjin, Yangtie, and Far East. Some of the CNC machine tools produced by these three factories are exported to Southeast Asia and other countries, and the quality is still good. .

"The manager of the distant company told me that if we order their lathes, it is impossible to complete them in one step. We can only trade one part at a time. It will take at least 2 to 3 months to obtain all the parts of the entire machine tool, so this This matter must be carefully considered..." Zhao Changfeng said to Duan Yun seriously.

"So that's the case." Duan Yun suddenly understood when he heard the words.

Obviously, even if Xiamen Yuanfang Company has great powers, it is impossible for him to get the entire CNC lathe from the other side at once. He can only take the form of ants moving, and send them to Xiamen in batches through various channels. side, and finally assembled and ready to use.

And this kind of transaction is also completely acceptable to Duan Yun. After all, you can check and accept each part one by one, pay with one hand and deliver the goods with the other. The payment method is more flexible. I don't have that much money yet.

"Manager Duan, I think this machine is too expensive, and you are no longer the manager of the labor service company. Is it necessary to buy this machine?" Zhao Changfeng asked suspiciously.

(End of this chapter)