Countercurrent 1982
Chapter 862 Longteng Machinery Factory
Chapter 862 Longteng Machinery Factory
After entering Shenzhen with the pass, Duan Yun and his party first came to the machining factory.
When Duan Yun first registered, the electronics factory was named "Tianjin Electronics Shenzhen Branch", and the machining factory was named "Longteng Machinery Factory".
At present, the labels of the two factories have already been produced, and they are waiting for the official listing ceremony on the day of the opening ceremony.
Duan Yun first came to Longteng Machinery Factory. These days, he has been very concerned about the two digital machining centers he had assembled before, worrying that something unexpected would happen during this period and damage the two expensive imported machine tools.
"There are a lot of factories in this place." After entering the Shangbu Industrial Zone in Shenzhen, Erhu looked surprised after looking at the neatly planned large factory buildings that could not be seen at a glance.
At this time, Shenzhen is still far from being full of high-rise buildings and bright lights, but the scale of the industrial zone is quite spectacular. Just this year, more than 1100 factories, large and small, have set up factories here, involving textile, light industry, electronic machinery and household appliances. In other factories, except for some companies with national prefixes, a large part of them are Hong Kong joint ventures, and the proportion of private companies in Shenzhen is not small.
However, Shenzhen factories in this era did not actually have many high-tech industries. The equipment used by the Hong Kong joint ventures is all obsolete and outdated old equipment, and most of the enterprises are three-in-one-subsidy enterprises.
The so-called “Three Reimbursements and One Compensation” refers to processing with supplied materials, processing with supplied materials and assembly with supplied materials and compensation trade. Specifications, quality, style for processing.
This kind of three-in-one-subsidy enterprise mainly makes profits by collecting processing labor fees, but in fact the majority of profits are made by foreign companies, and domestic companies can only earn some meager hard money from this labor-intensive industry.
Duan Yun started from the Shenzhen factory to establish a high-tech production and R&D base. His ultimate goal is to become a top international supplier.
"In front is our machining factory." Duan Yun saw that his wife and apprentice Erhu beside him were completely shocked by the scale of Shangbu Industrial Zone, and then said: "At present, the equipment and personnel in the machining factory are basically in place. I will lead you in to have a look first, and then I will tell you some things."
"Okay." Cheng Qingyan and Erhu nodded upon hearing this.
Seeing Duan Yun, Li Guosheng and others coming from a distance, the security captain at the door immediately greeted them with a smile on his face. These security personnel were all recruited by Li Guosheng from the local area before, and they are basically veterans with strong bodies. , and there is no bad record.
"Are the two CNC machine tools in the factory okay these days?" Duan Yun asked the security captain.
"Mr. Duan, don't worry, I arrange our brothers to work in three shifts 24 hours a day in the factory, and some brothers sleep next to the machines when they sleep at night. We will never let anyone touch these two machines." .” The security captain said repeatedly.
"Very good." Duan Yun nodded in satisfaction upon hearing this, and then led everyone into the factory area.
At this time, the factory has not officially started work, and the master craftsmen in several factories are leading the workers around several machines for operation training, teaching them how to operate ordinary lathes.
Compared with the electronic branch factory in Shenzhen, Duan Yun's Longteng Machinery Factory has a long-standing problem of recruiting workers. Most of the migrant workers who come to Shenzhen are farmers from villages and towns in the south. None of them have the experience of working in state-owned enterprises. There are very few old technicians in machining technology. After all, such technicians are also very popular in state-owned enterprises. Not many people will easily give up their iron rice bowls and leave home to work here in Shenzhen. There are only a few masters who understand machining technology, and it is precisely because of this that Duan Yun turned to Director Liu for help, hoping that he could help him find some retired veteran technicians and experts from Taiyuan.
Fortunately, the scale of Duan Yun's machine processing factory is not large, and it is no problem to support more than 100 people. Duan Yun can accept a certain period of internship for them, which is also helpless.
In addition, Duan Yun’s machining factory will make the most money in the future not from these ordinary machine tools and skilled workers, but from the two imported machining centers. Low-end mechanical products are basically saturated in China. The factory has the ability to process, and this kind of very high-precision imported machining center makes high-end precision products, which is a profitable cash cow.
At this time, Cheng Qingyan stopped in front of the two digital processing centers and carefully observed the two machines.
Cheng Qingyan graduated from a mechanical major and worked as a technician for several years before, but this was the first time she saw a CNC machine tool with her own eyes.
When Cheng Qingyan learned for the first time after her marriage that her husband Duan Yun actually spent 1 million to buy these two machines, she felt quite shocked, and she was always curious about what kind of machine could be worth such a big price. sky-high price.
"This kind of machine tool was imported from Taiwan by our Xiamen office through a special channel. This kind of machine tool is considered a high-end lathe in the world. Although it is not the top precision lathe in Europe and the United States, at least in China, there are only a few national key lathes. Military enterprises only have such equipment, and even state-owned enterprises do not have such good things.” Duan Yun paused, and then said: “This kind of machine tool only needs one person to operate, the machining accuracy can reach level 4, and the efficiency is very high. Gao, with these two machines, we can produce more advanced automotive gearbox products..."
"So that's how it is." Cheng Qingyan was stunned when she heard this, and she immediately understood her husband's intentions.
After all, my husband Duan Yun is still obsessed with machinery. Although everyone thinks that he is about to resign from the labor service company because he wants to make money from the electronics factory, in fact Duan Yun's ultimate goal is to realize his "car dream" .
"Brother Duan, are these the two Qiqi machines you mentioned earlier that cost more than 200 million yuan?" Er Hu also came to Duan Yun's side at this time, and said after looking at the two machines.
"That's right, these two machines." Duan Yun nodded, and then said: "After the Canton Fair is over, I will stay in Shenzhen for a week or two to write a set of operations for these two machines. Maintenance manual, I will also teach you how to use these two CNC machine tools step by step."
"Teach me how to use these two machine tools?" Erhu was stunned when he heard this.
"It's actually not as complicated as you think, and I only need to teach you a few simple workpiece programming techniques in the early stage." Duan Yun smiled slightly, and then said: "With the technology to operate these two machine tools, your machine tool The director of the processing factory doesn't have to worry about being stuck by skilled workers..."
(End of this chapter)
After entering Shenzhen with the pass, Duan Yun and his party first came to the machining factory.
When Duan Yun first registered, the electronics factory was named "Tianjin Electronics Shenzhen Branch", and the machining factory was named "Longteng Machinery Factory".
At present, the labels of the two factories have already been produced, and they are waiting for the official listing ceremony on the day of the opening ceremony.
Duan Yun first came to Longteng Machinery Factory. These days, he has been very concerned about the two digital machining centers he had assembled before, worrying that something unexpected would happen during this period and damage the two expensive imported machine tools.
"There are a lot of factories in this place." After entering the Shangbu Industrial Zone in Shenzhen, Erhu looked surprised after looking at the neatly planned large factory buildings that could not be seen at a glance.
At this time, Shenzhen is still far from being full of high-rise buildings and bright lights, but the scale of the industrial zone is quite spectacular. Just this year, more than 1100 factories, large and small, have set up factories here, involving textile, light industry, electronic machinery and household appliances. In other factories, except for some companies with national prefixes, a large part of them are Hong Kong joint ventures, and the proportion of private companies in Shenzhen is not small.
However, Shenzhen factories in this era did not actually have many high-tech industries. The equipment used by the Hong Kong joint ventures is all obsolete and outdated old equipment, and most of the enterprises are three-in-one-subsidy enterprises.
The so-called “Three Reimbursements and One Compensation” refers to processing with supplied materials, processing with supplied materials and assembly with supplied materials and compensation trade. Specifications, quality, style for processing.
This kind of three-in-one-subsidy enterprise mainly makes profits by collecting processing labor fees, but in fact the majority of profits are made by foreign companies, and domestic companies can only earn some meager hard money from this labor-intensive industry.
Duan Yun started from the Shenzhen factory to establish a high-tech production and R&D base. His ultimate goal is to become a top international supplier.
"In front is our machining factory." Duan Yun saw that his wife and apprentice Erhu beside him were completely shocked by the scale of Shangbu Industrial Zone, and then said: "At present, the equipment and personnel in the machining factory are basically in place. I will lead you in to have a look first, and then I will tell you some things."
"Okay." Cheng Qingyan and Erhu nodded upon hearing this.
Seeing Duan Yun, Li Guosheng and others coming from a distance, the security captain at the door immediately greeted them with a smile on his face. These security personnel were all recruited by Li Guosheng from the local area before, and they are basically veterans with strong bodies. , and there is no bad record.
"Are the two CNC machine tools in the factory okay these days?" Duan Yun asked the security captain.
"Mr. Duan, don't worry, I arrange our brothers to work in three shifts 24 hours a day in the factory, and some brothers sleep next to the machines when they sleep at night. We will never let anyone touch these two machines." .” The security captain said repeatedly.
"Very good." Duan Yun nodded in satisfaction upon hearing this, and then led everyone into the factory area.
At this time, the factory has not officially started work, and the master craftsmen in several factories are leading the workers around several machines for operation training, teaching them how to operate ordinary lathes.
Compared with the electronic branch factory in Shenzhen, Duan Yun's Longteng Machinery Factory has a long-standing problem of recruiting workers. Most of the migrant workers who come to Shenzhen are farmers from villages and towns in the south. None of them have the experience of working in state-owned enterprises. There are very few old technicians in machining technology. After all, such technicians are also very popular in state-owned enterprises. Not many people will easily give up their iron rice bowls and leave home to work here in Shenzhen. There are only a few masters who understand machining technology, and it is precisely because of this that Duan Yun turned to Director Liu for help, hoping that he could help him find some retired veteran technicians and experts from Taiyuan.
Fortunately, the scale of Duan Yun's machine processing factory is not large, and it is no problem to support more than 100 people. Duan Yun can accept a certain period of internship for them, which is also helpless.
In addition, Duan Yun’s machining factory will make the most money in the future not from these ordinary machine tools and skilled workers, but from the two imported machining centers. Low-end mechanical products are basically saturated in China. The factory has the ability to process, and this kind of very high-precision imported machining center makes high-end precision products, which is a profitable cash cow.
At this time, Cheng Qingyan stopped in front of the two digital processing centers and carefully observed the two machines.
Cheng Qingyan graduated from a mechanical major and worked as a technician for several years before, but this was the first time she saw a CNC machine tool with her own eyes.
When Cheng Qingyan learned for the first time after her marriage that her husband Duan Yun actually spent 1 million to buy these two machines, she felt quite shocked, and she was always curious about what kind of machine could be worth such a big price. sky-high price.
"This kind of machine tool was imported from Taiwan by our Xiamen office through a special channel. This kind of machine tool is considered a high-end lathe in the world. Although it is not the top precision lathe in Europe and the United States, at least in China, there are only a few national key lathes. Military enterprises only have such equipment, and even state-owned enterprises do not have such good things.” Duan Yun paused, and then said: “This kind of machine tool only needs one person to operate, the machining accuracy can reach level 4, and the efficiency is very high. Gao, with these two machines, we can produce more advanced automotive gearbox products..."
"So that's how it is." Cheng Qingyan was stunned when she heard this, and she immediately understood her husband's intentions.
After all, my husband Duan Yun is still obsessed with machinery. Although everyone thinks that he is about to resign from the labor service company because he wants to make money from the electronics factory, in fact Duan Yun's ultimate goal is to realize his "car dream" .
"Brother Duan, are these the two Qiqi machines you mentioned earlier that cost more than 200 million yuan?" Er Hu also came to Duan Yun's side at this time, and said after looking at the two machines.
"That's right, these two machines." Duan Yun nodded, and then said: "After the Canton Fair is over, I will stay in Shenzhen for a week or two to write a set of operations for these two machines. Maintenance manual, I will also teach you how to use these two CNC machine tools step by step."
"Teach me how to use these two machine tools?" Erhu was stunned when he heard this.
"It's actually not as complicated as you think, and I only need to teach you a few simple workpiece programming techniques in the early stage." Duan Yun smiled slightly, and then said: "With the technology to operate these two machine tools, your machine tool The director of the processing factory doesn't have to worry about being stuck by skilled workers..."
(End of this chapter)
You'll Also Like
-
The extraordinary life of a certain American comic
Chapter 200 16 hours ago -
American comics: Starting from a copycat arms dealer
Chapter 231 16 hours ago -
From the waste of spiritual roots to the practice of asking the devil
Chapter 380 17 hours ago -
Trickster Hunter
Chapter 363 21 hours ago -
Expedition to Europe
Chapter 1080 22 hours ago -
The giant corporations that started in Night City
Chapter 385 23 hours ago -
The apocalypse is weird: I am the number one containment object, what's wrong with being a litt
Chapter 612 23 hours ago -
Time and space transaction: Exchange food for the elf princess at the beginning
Chapter 503 23 hours ago -
I, the villain, trained the loser into a dark boss
Chapter 374 1 days ago -
Multifunctional Sword Cultivation Starts from Taxi
Chapter 23 1 days ago