Hand rubbing nuclear fusion live in the wilderness

Chapter 318 Confrontation Between Great Powers
In a secret base in Beijing, a 'MSC-CNC eight-axis six-link CNC machining equipment' stands in an open dust-free studio.

When Won completed the manufacture of the core computing chip of the central computer, Huaguo also completed the preparation of the numerical control program for the 'MSC-CNC eight-axis six-linkage numerical control processing equipment'.

The chip of the CNC processing equipment used for control has been installed on the CNC equipment, and the CNC computer next to it uses the supercomputer in the base.

Being able to use a supercomputer as a control server for numerical control equipment, this kind of thing can only be supported by national-level projects.

In the base, the lights are bright and people are coming and going, but there is no one in the dust-free studio where the 'MSC-CNC eight-axis six-link CNC processing equipment' is sealed.

What's inside is just a CNC machining equipment that has already been assembled.

Compared with Won alone, the labor force has never been a defect of Huaguo.

Whether it is the processing and preparation of parts, or assembly, or the customization of CNC equipment control system, it is the result of the joint efforts of countless people.

In fact, in addition to China, there are two other countries, the United States and the Germanic countries, who started the test for the "MSC-CNC eight-axis six-linkage CNC machining equipment" almost simultaneously.

Although their progress in replicating hardware is a bit behind, but because they have mastered the top-level eight-axis five-linkage CNC machine tools and five-axis five-linkage CNC machine tools, they are ahead of Huaguo when customizing and writing CNC control programs. .

These three countries have almost simultaneously completed their own customized 'MSC-CNC eight-axis six-link CNC machining equipment' control system and started experiments.

It's just that no matter who it is, no one can think of the final result.

"The control chip has been inserted!"

"Line detection is complete, voltage detection is complete!"

"The supercomputer is ready!"

"MSC-CNC custom system is all normal!"

"."

A series of reports sounded continuously in this underground base in the capital.

The leader of the special operations team, Chen Zhenghua, presided over the test.

Although he was so busy in daily life that he only regretted that he didn't have a clone, but when he was testing the super important industrial master machine 'MSC-CNC eight-axis six-link CNC machining equipment', Chen Zhenghua still rushed over.

He must also come over, because he is responsible for and sorting out the things reproduced through the live broadcast room.

Although he has never held the top positions in Shanghai and Beijing, his importance is no less than those two now.

"Group Chen, everything is ready."

With a report, Chen Zhenghua stood in front of the high-transmittance tempered glass, staring at the 'MSC-CNC eight-axis six-link CNC processing equipment' inside.

Even he, facing this super important equipment, was a little overwhelmed.

"let's start."

Chen Zhenghua replied softly, his eyes still stayed on the 'MSC-CNC eight-axis six-linkage CNC processing equipment', and he was a little wandering, and he didn't know what he was thinking.

"Yes!"

The staff in the base replied immediately.

The power is connected, the switch is closed and pulled down, and the power source from nowhere is constantly pouring into the 'MSC-CNC eight-axis six-linkage CNC machining equipment'.

"Detected that the power indicator light is on!"

In the base, a report sounded, and the first good news came, which was exciting.

But soon, the news from the supercomputer gave everyone a cold water.

"Warning, no control system detected, unable to start the device."

In the base, a mechanically synthesized electronic sound came from a small supercomputer.

Hearing the sound, Chen Zhenghua's heart skipped a beat, and he suddenly turned his head and walked towards the control room. Even he knew that the situation might not be good.

At this moment, the control room was already busy.

Several bald-headed and bespectacled engineers quickly checked logs, databases, underlying codes, and other things with a clear division of labor.

"what's the situation?"

Coming to the control room, Chen Zhenghua asked.

"It's being checked, it's not clear yet."

In the control room, a person in charge quickly replied.

Busy, after half an hour, with the cooperation of many engineers and programmers, the preliminary test results came out.

The program is normal and the hardware is normal, but the control program cannot match this 'MSC-CNC eight-axis six-link CNC machining equipment'.

"This is impossible!"

In the control room, the person who designed the control program of the 'MSC-CNC eight-axis six-linkage CNC machining equipment' saw the result and was surprised and couldn't believe it.

This set of control programs is completely customized according to the 'MSC-CNC eight-axis six-linkage CNC machining equipment'.

And because it is the first test, the program design is not complicated, only some very simple functions such as feeding, cutting, drilling, boring and adjusting angle.

The codes used are all of that generic type.

Not to mention 'MSC-CNC eight-axis six-link CNC machining equipment', even if it is put on an ordinary five-axis CNC machine tool, it can also be used.

Because manipulating a CNC machine tool to process parts requires only a few functions.

Feed, retreat, angle adjustment, radian adjustment, speed adjustment, etc.

And these things are universal!
No matter which machine tool, from the top five-axis CNC in the United States to the ordinary three-axis CNC, this principle is the same.

It's just that how well the program can achieve depends on the level of each country.

It is true that Huaguo lacks top-level CNC software, but it does not mean that ordinary CNC software cannot be written by itself.

Domestic Yawei, Huadong Heavy Machinery, Haitian Precision and other high-end CNC machine tool manufacturers all have their own CNC programs.

Although it is worse than that of foreign countries, it is not impossible to start even a CNC machine tool that has been built.

For any mechanical equipment, its original control codes are 0 and 1, which is the most basic machine language.

It is controlled by power on and off and chips, which is the principle of any machine language control device.

No matter how advanced your equipment is, it is controlled through machine language composed of 0 and 1.

Just like the top five-axis CNC machine tools in their collection, if the control program is put in, it can also be controlled such as start-up.

It just means that the control system does not match the machine, and it cannot exert the power of the top five-axis CNC machine tool.

What's more, the control chips in this 'MSC-CNC eight-axis six-link CNC machining equipment' are all made by themselves.

In other words, the control code and the control chip are completely consistent.

The control chip is designed according to the 'MSC-CNC eight-axis six-link CNC processing equipment'.

It can be said that it is almost impossible for the control system to do something that cannot even be matched and activated.

But it happened.

And the investigation results of the top programmers have also come out.

Through the analysis of server logs, cache, and database information, they confirmed that this information was not the result of calculations by small supercomputers.

It is the feedback from the 'MSC-CNC eight-axis six-linkage CNC processing equipment' in the dust-free studio.

That is to say, after they started the control chip and the control program, the 'MSC-CNC eight-axis six-linkage CNC machining equipment' in the clean room tested it.

While confirming the test results, this information was fed back, and then the small supercomputer fed back.

This result surprised everyone in the control room.

No one expected that this 'MSC-CNC eight-axis six-link CNC machining equipment' actually comes with a limit program.

Just like the charging cable of a certain mobile phone, it has a detection system inside, which allows the mobile phone to detect whether the data cable is original.

If not, it will not be possible to use this data cable for charging.

At present, the problems they encountered on the "MSC-CNC eight-axis six-linkage CNC processing equipment" are actually the same as the non-original data cable of a certain fruit phone.

That is, the mobile phone (machine) itself detects that the data line (control system) does not match the matching program, so it refuses to charge (start).

When the results were checked out, everyone in the control room frowned.

Chen Zhenghua was also very surprised by this, he followed the Korean Won from beginning to end.

The technology shown during the live broadcast by the other party has never encountered such a situation, whether it is W410A refrigerant or the top-level electric propulsion-free engine.

This time, on the 'MSC-CNC [-]-axis [-]-link CNC machining equipment', it was the first time he encountered a situation like a lock.

"Group Chen."

In the control room, after everyone was silent for a while, a top expert in CNC machine tools called out hesitantly.

Chen Zhenghua looked up, and responded with a hum, indicating that the other party had something to say.

"Zu Chen, this is not the first time we have encountered such a situation."

"Many top foreign equipment have special chip locks or control locks."

"Just like the charging data cable of a certain fruit phone, it has a microchip in it, which can correspond to the program on the phone, so as to confirm whether it is original."

"On this CNC machining equipment, perhaps."

Speaking of this, everyone in the control room understood that they were all elites after all.

The meaning of this expert is very clear. It is normal to have a lock on the 'MSC-CNC eight-axis six-link CNC machining equipment'.

But they can also find out this 'lock', and then decipher it in reverse.

Just as Huabei is strong enough to decipher a certain mobile phone, they can naturally decipher this 'MSC-CNC eight-axis six-linkage CNC processing equipment' in reverse.

It's just that the key now is to find the lock and decipher the lock.

After all, there are tens of thousands of parts in an 'MSC-CNC eight-axis six-linkage CNC processing equipment'. The ghost knows where the anchor put the lock and what kind of parts it is.

Of course, in addition to finding the 'lock' to decipher, there is another way to use this 'MSC-CNC eight-axis six-link CNC machining equipment'.

That is to wait for the follow-up live broadcast of this anchor.

He needs to upgrade industrial equipment, and he definitely needs to use 'MSC-CNC eight-axis six-link CNC machining equipment'.

And in this way, the anchor will definitely manufacture the control chip and write the control program of the 'MSC-CNC eight-axis six-link CNC machining equipment'.

At that time, they can also follow along to learn, and then also reproduce the control program.

Then they will be ready to use.

Chen Zhenghua thought for a while, and quickly made a decision.

The base arranged personnel to look for the 'lock' while they continued to watch the live broadcast, waiting for the anchor's follow-up live broadcast content, and harvested the control program of the 'MSC-CNC eight-axis six-link CNC machining equipment' from the live broadcast.

However, even if the control program is harvested, Chen Zhenghua believes that it is necessary to continue to decipher the lock.

He felt that the lock setting this time was probably done on purpose by the anchor.

Although he didn't say it clearly, he felt that this might be a test for the other party to stay on purpose.

Only after passing this test can they learn more from the live broadcast in the future.

Apart from China, the testing and program compilation of "MSC-CNC eight-axis six-link CNC machining equipment" in the United States and Germany also encountered the same problem.

There are many smart people. After inspecting and analyzing the equipment, CNC experts from the two countries quickly realized that there is a 'lock' on this CNC equipment.

Like Hua Guo, they also chose to find a 'lock' to decipher.

Even if the latter anchor will live broadcast the writing of the control program of the 'MSC-CNC eight-axis six-link CNC machining equipment'.

This 'lock', like a peak, stands there, allowing the three countries to secretly compete with each other to see who can decipher it first.

At the same time, the three countries of Hua, Mi, and Germany also tacitly regarded deciphering this 'lock' as a common test.

After all, this is something set by alien civilizations, if any country can find and decipher it first.

So doesn't it prove to a certain extent that the technology of this country is already higher than that of the other two countries.

In the simulated space, Won is assembling the central computer.

In the original storage of transistor computers, he built a new computer room, and the chips prepared by the lithography machine are now being assembled.

He never expected that countries such as Hua and Mi would take his restrictions as a test and decipher them.

Because it's not necessary at all.

His purpose of setting up this thing was just to help his motherland, and he didn't think much about it at all.

It is simply too much to think about the test of parallel world civilization.

In the new computer room, Won started to assemble other equipment after assembling the oversized chip in his hand.

Things like display screens, magnetic storage, input/output devices, etc.

Except for the different core computing chips, many things in old computers are actually universal.

Like disk storage, Korean won is no longer manufactured separately, but is directly exchanged through technology points.

After all, the storage capacity of the original magnetic storage device is not bad, and it is enough for use at present, so there is no need to spend energy to manufacture a new storage device.

Of course, new equipment is also available.

Don't forget this time, the Chinese intelligent programming language is about to be released.

After learning the three-level task, Won knows the difference between the 'Chinese intelligent programming language' and the computer language currently used by humans.

Whether it is the original machine language, or assembly language, or compiled language and high-level language.

The Chinese intelligent programming language is a completely different set of machine languages.

So he needs to deal with it bit by bit from the most basic binary machine language.

(End of this chapter)