Hand rubbing nuclear fusion live in the wilderness

Chapter 321 Yang Conspiracy to Expand Chinese Influence
In the control room, there was silence, only the flickering images on the display screen and the occasional beeping sound from the instruments.

Now that the story has come to this point, everyone also understands what is going on with the lock on the 'MSC-CNC eight-axis six-link CNC machining equipment'.

The change in base system is actually nothing.

But if the base system is changed, it is indeed possible to let the hardware recognize different levels to control the CNC equipment to accept and reject external programs.

And the principle of this 'lock' is quite simple, it only needs to use a few special capacitors and resistors and the like.

It's just that this method is very clever, and no one thought of it before.

Pure hardware can shackle software. This kind of thing can actually be done, but no one has ever thought about it.

The reason is actually very simple, because the hardware is tangible and can be damaged, disassembled or replaced with parts.

Just like after a car is locked with a chain, I can directly destroy it with scissors.

Even if you weld it, I can remove the welded part and replace the parts in this part.

Therefore, locking the hardware does not actually have much effect.

Generally speaking, the difference in hardware between countries is due to the fact that they first develop and lead, and then block and prohibit exports, forming a gap.

Just like top aircraft carrier deck steel, top five-axis CNC machine tools.

Export is completely prohibited, and hostile countries are prohibited from obtaining it for research.

But the software is different. The software can be packaged in various ways, can be used for data protection, and can be encrypted in various ways.

As long as your software technology or encryption technology is higher than that of the opponent, it is basically impossible to decipher it.

Even if there is a vulnerability, it can be patched and updated in time after discovery or the operation of the software can be suspended directly.

After the hardware is in the hands of the other party, sooner or later it will be researched out one day.

Through various instruments, the composition, molecular structure, crystal structure and so on of this material can be known.

Through scanning, the structure, composition and so on of this equipment can be known.

Know the composition of the material and try to smelt it many times, although it may not be possible to smelt exactly the same material.

But in the end, something can be found.

Knowing the materials and equipment structure, etc., when the materials are complete, it can basically be reproduced.

Sometimes, for the development of a country's material industry, there may be just a few things that are lacking.

So locking from the hardware is an unreliable thing.

In terms of hardware, only continuous research and development can widen the gap.

This is almost everyone's consensus. Although Huaguo, Miguo, and Germania noticed that the 'MSC-CNC eight-axis six-linkage CNC machining equipment' had a lock.

But I never thought of doing it this way, which is why experts from various countries seem to be so puzzled. I don’t know what kind of form the locking of this 'MSC-CNC eight-axis six-linkage CNC processing equipment' is added. of.

There are too many parts in the 'MSC-CNC eight-axis six-linkage CNC machining equipment' without determining which parts work.

Even after more than a month has passed, there is no way to start a targeted analysis, and countries can only select some suspected parts in key parts to do it.

But it was finally confirmed that these found out are not 'locks'.

It's different now. After roughly figuring out the main principles, targeted parts inspection can be carried out.

In fact, Hua Guo is not the first to confirm this.

As the development place of computers, when South Korean Won began to write the ternary underlying code, the underlying architects in the relevant laboratories in the United States had already reacted.

After getting this good news, the replica laboratory in the United States immediately began to check the "MSC-CNC eight-axis six-linkage CNC machining equipment" to find the "lock", and then dismantle and decipher it.

They think that as long as the 'lock' is removed, they can use their own program to control it.

However, they didn't expect that a bigger surprise was still waiting for them.

As for Huaguo, because Chen Zhenghua, who was in charge of these matters, had already flown to Hubei Province, the matter of dismantling the 'lock' was temporarily put on hold.

After all, even if a "MSC-CNC eight-axis six-linkage CNC machining equipment" is reproduced, it will consume huge manpower, material resources and resources.

Although Hua Guo is rich and powerful, he still feels a little pain, especially some extremely difficult alloy materials, which cost a lot of money.

Of course, the huge cost is second. The most important thing is that the research on 'MSC-CNC eight-axis six-link CNC machining equipment' is an important research that is classified as S-level.

Without the permission of the superior, no one dared to go beyond the threshold except for the research within the established scope.

In the simulation space, Won was still sitting in front of the display screen, using a specific input device to quickly write the underlying code.

Experts from various countries can guess what is going on with the lock on the CNC machining equipment from the underlying system. This is something that he has long expected in his mind.

But so what if you knew.

His methods are more complicated than these experts imagined.

The search system on the 'MSC-CNC eight-axis six-link CNC machining equipment' is indeed carried out by monitoring the level strength of the analog circuit.

But what is used is the technology in the intermediate electric energy application knowledge information.

Deciphering this thing is far from as simple as experts from various countries imagined.

Simply dismantling this thing will only cause a chain reaction in the CNC equipment, causing some key components inside to be automatically destroyed, which in turn will lead to the scrapping of the entire equipment.

Even if he finally found a way to remove the retrieval system and successfully installed his own chip, it would still be impossible to fully control it.

After all, the underlying code of the ternary system is completely different from the calculation rules and binary, not to mention the Chinese intelligent programming language based on the ternary system.

Although the binary underlying code, on the basis of matching the corresponding chip, can also be used in the 'MSC-CNC eight-axis six-link CNC machining equipment'.

However, the control force of the entire CNC equipment will drop a great deal.

Just like Huaguo used the CNC program written by himself to control the top five-axis CNC machine tool in the United States, it was impossible to exert the true power of the top five-axis CNC machine tool.

This CNC machining equipment was carefully selected by Won.

Among the intermediate industrial equipment, there are not no CNC machining equipment better than it.

The reason for choosing this is because this eight-axis and six-link CNC machining equipment is based on the ternary system.

"MSC-CNC eight-axis six-link CNC machining equipment" is actually the name of a whole series of equipment, which is a unified term.

Just like Huaguo's J-10, J10b, J11-B and other fighters with different performances, they are collectively called J-series fighters.

The one he selected is one of the 'MSC-CNC eight-axis six-link CNC machining equipment' series.

In fact, the really detailed name is called 'MSC-CNC seventh-generation ternary medium-sized eight-axis six-linkage CNC machining center'.

In this series of CNC equipment, apart from this one, there are actually many different types in it.

Some are small, some are large, some fit binary, some fit ternary.

Different types of equipment are different in structure, and some differences are even so great that they can be compared with modern airplanes by the first airplane made by the Wright Brothers.

Won didn't know whether the name of this series was defined by the civilization that invented the device, or whether it was defined by itself behind the system.

However, among the materials and information passed on, there are indeed many types of scientific and technological information, and a single type of scientific and technological information has different types of scientific and technological information.

From this point of view, it should be sorted out by the system itself.

If one day, Huaguo's J-series fighters are included in this system.

So the display should be 'HG Annihilator'?
And it should contain all fighters from J-10 to J-20 and even J-30.

According to this division, as long as the technology does not break through the level limit, such as the elementary level breaks through the intermediate level, and the intermediate level breaks through the advanced level, then all the things in this series are included in it.

At least from the current data and information received by the Korean won, this is indeed the case.

The only problem is that since the underlying code is ternary, the Chinese intelligent programming that will be explained and used next is also ternary.

This is a completely different concept from the binary computer currently used by humans.

But in this way, he can ensure that when countries use 'MSC-CNC eight-axis six-link CNC machining equipment', they will use Chinese intelligent programming.

The reason is actually very simple.

Although the underlying code of the ternary system should be available in all countries, at least the countries at the level of the five permanent members have research on the ternary system of computers.

But having the underlying code and the computer control system does not mean that they can immediately compile a control system that matches the CNC equipment.

Because there is a long distance between the underlying binary code and the matching CNC equipment control system.

Even if national-level power is used for research and development, it will take a long time.

People are inert. If there is a ready-made control program, no matter who it is, it will choose this one.

The biggest idea is that I use Chinese intelligent programming on the one hand, and develop and write my own control system on the other.

Wait until your own control system is developed, and then replace it.

After all, it is just an industrial master machine, it is independent.

Moreover, the CNC equipment is used to process parts and equipment, even if the Chinese intelligent programming language is used, it will not affect other systems.

But that's really what Won is for.

'MSC-CNC eight-axis six-link CNC machining equipment' is just the beginning, and the things he throws out later will be controlled using Chinese intelligent programming language.

If you don't want to use the Chinese intelligent programming language, then targeted deciphering work is enough for these countries to be busy.

If used, the influence of Chinese will be greatly expanded.

In fact, this is a conspiracy, either you use the Chinese intelligent programming language to expand the influence of Chinese.

Or spend a lot of effort to decipher.

Even if you don't do it well, you may end up with a control program that is a bit behind.

As for how to choose, it depends on each country.

Huaguo, Hubei Province, Shennongjia.

Chen Zhenghua, who is in charge of the special operations team, has been here for almost ten days.

For the current special operations team, the most important things are three things.

One is the live broadcast room in charge of Korean won.

This is now the responsibility of the team members.

Chen Zhenghua is now in charge of two other things.

One is to reproduce the live broadcast of technological operations, and the other is to deal with the suspected alien civilization base in Shennongjia, Hubei Province.

After nearly half a year, with various means, the mist containing the radioactive element 'plutonium' around the base was finally completely cleaned up.

The reason why it took so long is, on the one hand, that it is necessary to deal with the mist containing the radioactive element "plutonium" in a perfect and safe manner.

China is not an island country that can let nuclear waste water enter the sea.

Moreover, the Shennongjia scenic spot is inland, and there are many villages, towns and cities nearby.

Once these mist containing radioactive 'plutonium' elements invade these places, it will be a huge disaster.

The second aspect is that the fog in the base has been continuously generating and spreading for the past six months, and it didn't completely stop until more than a month ago.

When the fog spread widely, it nearly covered nearly half of the Shennongjia scenic spot at one point, causing hundreds of nearby villages to be forced to relocate.

In addition, the nature of these mist is very special, it doesn't float with the wind very much, and even if it rains, it can't melt.

If the fog does not disperse, it will be extremely troublesome to enter and exit the base.

In the past six months, Hua Guo only arranged for a small number of personnel to wear corresponding protective clothing and enter the base to explore the situation.

It’s just that the results of exploration are limited, because the deeper you go, the higher the concentration of radioactive substances in the fog, and the service life of protective equipment will be reduced sharply in a highly polluted environment.

Moreover, the white fog blocks the line of sight, making it difficult to collect information and do business.

Although this nature caused trouble for Hua Guo to enter the base, it also gave time to deal with it.

Otherwise, when there is a heavy rain, the mist will invade the groundwater or enter the river along with the rain, which will cause great trouble.

The combination of various circumstances led to the fact that it took nearly half a year for the white mist of weapons containing reflective elements to be cleaned up.

The blockade of Shennongjia for nearly half a year has also attracted the attention of other countries.

Various methods such as lurking personnel and satellite surveillance were used to find out what happened in Shennongjia.

Not to mention personnel from other countries, even the people of Huaguo are very interested in the blocked Shennongjia.

After all, there are quite a lot of rumors about Shennongjia, plus some rumors and speculations on the Internet.

People who once watched the excitement and were bribed by other countries flocked here.

However, after a batch was caught at the first time and the news was released that a dangerous substance had leaked from a laboratory in Shennongjia, the people who went nearby basically disappeared.

After all, Huaguo is so big, and there is no shortage of Shennongjia scenic spots for tourism.

Where to go to play is not to play, do you have to go to Shennongjia to smoke dangerous substances?Maybe I will be invited to drink tea.

In the Shennongjia base, after the fog cleared, the first batch of personnel entering the base were ready.

Chen Zhenghua put on a protective mask and protective clothing, ready to go in with the first batch of people entering.

Although the white mist containing radioactive elements has been cleared away, it is not known whether there are other dangers in this base.

The first batch to enter still took great risks.

(End of this chapter)