Hand rubbing nuclear fusion live in the wilderness

Chapter 81 Metal Detectors

Taking advantage of the cooling time of the iron hoe, Han Yuan cut down a tree trunk, took out the cooled hoe and measured the diameter according to the cylinder, and simply processed the somewhat blunted iron ax to cut the trunk slightly, Then smoothly stuff it into the cylinder of the hoe.

Smash it twice, and the wooden stick is firmly tightened.

A modern, hand-built iron hoe and you're done!
Holding the hoe handle and waving it twice, the gene drove Han Yuan to hoe the ground a few times naturally, and nodded in satisfaction.

This is a good hoe, it will definitely work for digging corners!

After the hoe is cast, the second piece is the knife.

At the first time, he was going to make knives, but unfortunately, the condition of the last iron plate was not allowed, so he couldn't do anything about it.

With the right pig iron this time, it's time to start forging.

I rummaged through the remaining six iron pieces and found a suitable one.

After returning to the furnace to burn red, there was a burst of clanging and knocking, and this piece of pig iron gradually became thinner and turned into a block, but the shape was irregular, and the edges were also full of irregular iron thorns.

This was in his expectation, the iron tongs were stuck in place, and the iron piece was fixed, so there was no need to worry that the tongs would suddenly burn.

The iron ax came on the stage, butt against the irregular edge, and the iron hammer slammed down, removing the unevenness around the iron piece little by little.

After a while, a neat rectangular knife embryo was knocked out.

The cut pieces of iron won are also collected, which can be used to make some fragmentary iron nails and arrowheads.

After the knife blank is finished, it will be quenched after being heated red, and then a wooden arm will be inlaid, and a woodcutter without a hook point will be ready.

Put on the whetstone, start the front, and after more than half an hour, the iron knife revealed that it should have a sharp edge.

The silver-white sharp blade reflected the cold light, holding the handle of the knife, waved down, and the edge of the knife pierced into the wood in an instant, it was extremely sharp.

The audience in the live broadcast room were amazed.

【Brilliant! 】

[It's crazy! 】

[The sixth artifact in the server, the 'hatchet knife', 666! 】

[It's also a nine-year compulsory education, why are you so good as the anchor? 】

[I offered 100 yuan, and I bought this knife! 】

[100?Who do you look down on?I offer 101 yuan. 】

[I pay 101.5 yuan! 】

【102! 】

[Stop arguing, I will offer 110 yuan. 】

Seeing the playful barrage, Han Yuan smiled and ignored it. After a short rest, he was ready to build the third piece of iron.

The third piece of iron, he originally wanted to make a shovel, but after the iron hoe was made, this idea changed.

The hoe can replace the shovel to a certain extent, so he temporarily put down the idea of ​​forging the shovel.

The iron chisel made by the fourth piece will automatically move forward.

The forging of an iron chisel is actually similar to that of forging an iron chisel, but the flat opening at the bottom is not a round tip, but a wide and flat knife face, and the knife face also needs to be sharpened.

I found a smaller piece of pig iron, put it in a bonfire and burned it red, and then began to forge it. First, I forged it into a rough shape.Then use an iron ax to remove the excess parts, and then return to the furnace to forge again.

After more than half an hour, a rough but brand new iron chisel was completed.

After forging the iron chisel, Han Yuan looked up at the sky, and the sun had already set in the west.

If you hurry up, you can make another piece of iron.

After thinking about it, he got up and took out the iron sheet from the bamboo basket, showed it under the camera, and said:
"This is an iron plate that I smelted when I first smelted iron. I wanted to use this iron plate to forge a knife, but it was of poor quality, with holes and thin spots everywhere. "

"At that time, I wanted to fold this piece of iron into two pieces and forge them to fuse, but it failed because I didn't have the flux of borax in my hand, and the strength of my arm alone was not enough to press it into one piece."

"After I went back later, I thought about it carefully. Although this iron plate is not suitable for making knives, I can disassemble it and use it to forge a saw."

"With the iron saw, whether it is trimming wood or making mortise and tenon structures, I will be much more convenient."

As he spoke, he threw the iron sheet in his hand into the kiln for calcination. After covering it with some charcoal, the iron sheet was burnt red. The iron tongs clamped it out, and the iron ax separated the combined iron plate and chopped it up. Break, into two pieces.

There are several small holes on the piece of different quality, and there are many thin places.

The other one looks okay, and the thickness of the iron sheet is enough.

The iron tongs clamped the iron plate, and the hammer kept falling, hitting the iron plate into long strips little by little. The iron ax removed some thin iron pieces from time to time, because these places were useless.

More than half an hour passed, and after four times of calcination, he finally forged this iron plate into shape, and obtained a thin piece that was more than half a meter long and slightly wider than a finger.

After forging, it is not quenched immediately. To make iron saws, fine saw teeth are naturally required. After quenching, the pig iron will become hard, and the saw teeth are difficult to cut out.

In the past, he planned to chisel it out bit by bit with an iron axe, but today he made an iron chisel, which is more convenient.

Place the iron ax under the thin iron bar, fix it with iron pliers, and control the angle and depth. Every time the iron chisel and hammer cooperate, a small triangular piece of iron filings will be chiseled from the iron sheet.

After chiseling until the sun went down, the sawtooth was finally preliminarily processed.

After knocking, Han Yuan breathed a sigh of relief, touched the sweat on his head, moved a bit, and showed the preliminarily processed sawtooth to the audience in the live broadcast room.

Except that the saw teeth are of different sizes and look a bit ugly, they are already very similar to the hacksaws produced by modern industries.

[What a fierce man!Little by little, he took a chisel and made a chainsaw. 】

[I said, if I get lost in the wilderness, I would rather choose a dog leash. 】

[If I hadn't watched the whole process, I wouldn't have believed it. 】

[Isn't this chainsaw really a prepared prop? 】

[Labor and management would rather believe that money can buy love than that someone can forge a hacksaw with bare hands!This!Do not!division!study! 】

['Uncle's Birthday' gives away grilled fish*100, this is not survival in the wild, it is evolution in the wild! 】

['Ran Xiaofeng' sent bread*8888, I feel that sooner or later I will see the anchor appear on the screen in a plane]

After showing the initially forged iron saw, Han Yuan put it into the bamboo basket, and said while starting to pack things.

"Although the forging of the iron saw has not been completely completed, the sun has already set, and today there is no way to continue. Wait until tomorrow, and I will come back and finish the rest of the work."

"As for today's live broadcast, let's stop here first, and see you tomorrow."

After finishing speaking, he turned off the live broadcast, quickly packed up the things on the ground, put some in the shelter, and put some in bamboo baskets, and rushed back to the wooden house on his back.

After a while, it will be dark, and it is easy to lose your way and encounter danger when walking in the rainforest at night.

Hurrying quickly, he rushed back to the wooden house before it was completely dark.

After raising the bonfire and taking a break, Han Yuan cooked dinner for himself and the two little ones, opened the system task panel, and called out in his mind.

"System, receive the metal mineral detector!"

"The reward has been issued, please check with the host!"

　Two, send out at noon, the author wrote all night.

　　Let's count the votes.

　　Thank you ︶￣ㄣ″, Uncle’s birthday, Ran Xiaofeng, book friend 20170517215307799, Lonely Overlapping Shadow, I don’t want to change my nickname, Shangqingxian, Harvest Time, I can take a duck if I don’t have a name, and other big readers for their rewards.

　　Thank you.

　　PS: It would be better to have some more (～￣▽￣)～.

　　Go to bed first, and get up to code in the afternoon.

　　
　
(End of this chapter)