Starting from the bright sword to engage in military industry

Chapter 1126 Chapter 1135, the new gun is very aggressive

Ding Ding Dang Dang... With the cooperation of the machine and the workers, the narrow and long rolls of copper plates are cut into discs one by one, and then put on the mold to beat, change the mold and beat again, change and beat again... Finally , After becoming a qualified shell blank, the excess margin is cut off, and then the primer hole for placing the primer is drilled.All of these require human intervention, and machines cannot do it automatically.

The shell casings with drilled primer holes are placed upside down on the transfer belt, and the workers behind turn the conveyor belt, and someone puts the prepared primer into the primer holes.The next process is to make three impressions on the place where the primer and the shell are in contact, so that the primer and the shell are tightly combined.Then apply waterproof glue to the gap between the primer and the shell.

After the primer is done, the cartridge case is placed upwards, and the team is lined up to the next process.This process is to fill the shell with single-base propellant.This process has a special filling mold, which can fill 100 rounds of bullets at a time, but the dispensing still needs to be done manually.Of course, the workers only need to put the propellant into the special funnel, and then pull out the baffle that blocks the funnel.

After placing the propellant, it is to place the warhead, adjust the depth of the warhead, and stabilize it... In short, there are a series of complicated procedures for making bullets. There are many procedures in the middle, so I won't go into details.

When the heaviest bullet was formed, it was sent to a basket.

Ding Ding Dang Dang... Hu Changyi watched the bullets fall into the basket one by one, with a contented smile on the corner of his mouth.This basket is 1000 rounds of ammunition, and one production line can produce 4 baskets a day.

"These bullets are probably the first mass-produced 7.62×39mm intermediate power bullets in the world, right? Hehe, this one came from our Jiuzhai Arsenal. It will be recorded in the history of the world's military industry in the future! Although this output In the eyes of many big powers, it looks pitifully small, but it is definitely enough for the nine detachments!" Hu Changyi said here to himself.

After waiting for two hours, the basket of bullets was full, and then some workers moved the bullets to the chopping board, picked up the bullets one by one and put them away.Well, the standard 100 rounds are packaged in a small carton, and the final assembly structure is 1000 rounds in a tin box.The iron box is a good partner of the ammunition hand on the battlefield, with a total weight of 17 kg, and one ammunition hand can withstand two boxes.

In fact, Hu Changyi knew that when Maoxiong's family mass-produced the shells of this intermediate-power bullet, they used copper-plated steel shells or copper-clad steel shells.But the Jiuzhai Arms Factory is full of brass shells.It's not that the Jiuzhai Arms Factory is too arrogant, but that the production difficulty of pure brass shells is different from that of copper-plated steel shells or copper-clad steel shells.

Without stronger industrial production capacity, each additional process will greatly reduce output.The point is... Hu Changyi still counts on those finished shell casings to be used for reloading bullets.Brass shell casings are reassembled, whether it is to readjust the shell casings or to resmelt them in the furnace, the difficulty of the process will be much lower.As the director of the factory, Hu Changyi had enough to worry about.

"Director, this is 1000 rounds!" The workers had already packed the boxes, and even the quality inspector and the warehouse clerk had written a list, and immediately came to report to Hu Changyi.

"Very good, this box of ammunition is treated as a test product! And the box over there is also treated in the same way! Where is the guard line? Take it with you and go to the shooting range!" Hu Changyi waved his hand and took the lead to leave.

"Detachment leader...factory director...factory director..." Amidst the many greetings, Hu Changyi led the guard platoon and the experimenters to the shooting range.

On the shooting range, with two bang bang bang bangs, two boxes of bullets were placed on the table outside the sandbag wall.Immediately afterwards, a long wooden box was placed on the table.

The experimenters worked together and opened the wooden box, revealing the curved magazine and the empty belt inside.There was no need for Hu Changyi to order, everyone started directly, skillfully filled the magazine with bullets, and the belt was loaded with bullets by the ram.Soon, all 2000 rounds of ammunition were used up.

After doing this, the bullet chain was put in the bullet chain box and lifted aside, and several wooden boxes were brought over and placed on the table.At the same time, there is also a long sink on the side, which is directly filled with water.Not to mention, another wooden box filled with sand was placed on the ground.

After preparing these, the experimenters were separated, the wooden box was opened, and the parts were quickly assembled one by one to form a gun.

At this time, the leaders of the Nine Detachments, Jiuzhai Arsenal and the logistics department had already gathered in the observation ditch of the shooting range.Well, several people who had extra meals that night were there, and Minister Zhang took the lead.

"It doesn't matter what the new bullet is, it just depends on the posture of the preparation, it's not bad!" said Lao Liu, who was in charge of the warehouse.

"Now, our new product experiments and product testing have a fixed process to avoid accidents as much as possible. And these experimenters are also disabled veterans who have been on the battlefield. They can't march long distances Combat, but the skills are still there, and it is also a defensive force that sticks to the arsenal. That is, the fortifications they prepared have not been used!" Li Wenying said.

"Look, what are they doing? They're still throwing it into the sink? This is a new gun, just such a bad law?" Someone who was moved to tears by the chili sauce cursed at this moment.

"Don't worry, rest assured! This is an extreme test, simulating the performance of firearms in various environments!" Minister Zhang said calmly after receiving Hu Changyi's report.

"Report to the factory manager, the preparations are complete!" Soon, there were no more guns on the table, only the water in the sink on the ground was still rippling.

"Then let's start! Test the No. [-] gun first!" Hu Changyi gave instructions.

"Yes, factory manager!" Experimenter No. [-] heard the order, and directly took out a rifle with a long magazine from the pool, shook the water off his body, and completed the designed action.

Da, da, da da... As the experimenter pulled the trigger, the sound of AK47 gunfire resounded across the earth for the first time.With the sound of gunfire, his body vibrated, and some water droplets were suppressed, forming a layer of water mist.But it didn't affect the shooting at all.The rifle in the hands of the experimenter still maintains the shooting method of combining single point and short point, and only hits one round of bullets on the target position of 100 meters.Of course, there are many misses.

This is not because the experimenter is not good at marksmanship, but after changing to a new gun, he needs to adjust the trajectory, adapt to the recoil, and find the gun feel.

One magazine, 30 rounds of ammunition, was quickly finished. The experimenter glanced at the bullet marks on the target, and shook his head helplessly. This time, there were only about ten rounds of bullets on the target, which was a bit embarrassing.

(End of this chapter)