my scientific age

Chapter 102 "On the Significance of Cartographic Standards to the Development of my country's Industrialization"!
A young editor in a robe hurried along with a manuscript wrapped in a newspaper in his arms, and soon came to the office of the editorial director.

"Dong dong!" A crisp and short knock on the door sounded.

"Come in." A male voice came from inside.

The young editor pushed open the door and walked to Wen Yiduo, who was writing an article at the desk. With a hint of respect, he came to the desk: "Editor-in-chief, this is the latest off-campus submission."

The words fell, and the manuscript was gently placed on the table.

"Off-campus manuscripts?"

Wen Yiduo was a little stunned, but he didn't expect to receive submissions from outside the school now. He put down the pen, looked up at the young editor to ask about the situation, and then his eyes fell on the manuscript that was about two fingers thick: "Who is the author? Scientific manuscripts, or famous scholars manuscripts, have you read them, and which section should they be divided into?"

After more than [-] years of continuous exploration and development, the Journal of Tsinghua University has evolved into a regular top-level academic journal. Nowadays, it rarely receives external submissions. First, the rejection rate is too high, which makes the civil literati and society who want to obtain honor. Scientists are very shameless, and second, reviewers are hard to find.

It’s good to be divided into philosophy and social sciences. Most of these manuscripts are in the category of literature. Most of the editors in the editorial department of the journal are masters of literature, and they are basically rejected at a glance.

However, for the manuscripts divided into the natural science version and the English version, the difficulty of reviewing has greatly increased. Many social sciences who do not understand anything will write articles full of sophistry, which are crowded, and reviewers are extremely difficult to find.

Over time, the editorial department of the journal, which has been troubled, will directly reject most of the articles from social science scholars as long as they do not conform to the formal papers and manuscripts.

Well, is social science called a scholar?

not called.

Social science is social science, a pig with a green onion in its nose, pretending to be an elephant.

"The author's name is Zhang San, I have never heard of this name, and the manuscript has been read. Although this manuscript does not meet the requirements of the writing, our two review editors have cross-reviewed and agreed that it should be handed over to you or Deputy Editor-in-Chief Chen. Read it, but the deputy editor-in-chief Chen is not in the editorial department today." The young editor responded with a solemn and serious face.

"It sounds like a real name, but also a pseudonym, strange."

Hearing these words, Wen Yiduo understood a little bit. It seems that today's manuscript, which is likely to come from the social sciences, has a considerable degree of high value, so that the review editor pays so much attention and picks up the manuscript that is not bound on the desktop. , pushed the glasses with his hand and looked at the cover.

"Mechanical Drawing"

Author: Zhang San.

Taking a look, Wen Yiduo's pupils shrank suddenly. After serving as the editor of the journal for many years, his knowledge and vision are far better than before, and he can clearly understand what these four words mean.

"Mechanical drawing? Is this a systematic drawing textbook?" Wen Yiduo hurriedly looked at the young editor at the desk and asked.

There was a hint of urgency in the words.

The young editor respectfully said, "You will know when you see it."

Wen Yiduo received a response, took a deep breath, a dignified expression in his eyes, an indescribable seriousness on his face, his eyes fell on the manuscript again, and he took off the first cover page.

The second page is not the imaginary text, but another article.

"On the Significance of Cartographic Standards to the Development of my country's Industrialization" - Zhang San.

Abstract: This paper summarizes the practical application significance of drawing standards and their role in the field of industrialization, summarizes the important role and content of mechanical drawing in the development of my country's industrialization, and makes appropriate suggestions for my country's current weak and low-based industrial conditions.

Drawing is a common language in the engineering and technical field, which realizes the functions of people expressing design ideas, transmitting design information, and exchanging innovative ideas. Construction, inspection, technical exchange, chemical industry, weapon design and other fields have an irreplaceable important position and basic application significance. They are an indispensable link and bridge, and should not become the basis for monopoly and blockade by a certain party or country. Knowledge.

Various industrialized countries in the world attach great importance to the standardization and self-ization of 'patterns', such as the United States, Japan, the United Kingdom, France, etc. The patterns reflect the degree of technological development and technical strength to a certain extent. In fact, countries with self-pattern standards are all It is a technologically powerful country.

There are relatively prosperous industries in the coastal areas of our country, but most of these industries are labor-intensive industries, characterized by low level of technology, large use of labor, weak strength, easy to suffer from external technological shocks, technology and equipment sources are strongly dependent on foreign countries, future development The prospects are bleak for many reasons, one of which is the lack of systematic cartographic standards.

The term labor-intensive has a definition at the end of the text.

Drawing standards are the basis and framework of drawings, and are the collective product of the development process of drawing standardization. They essentially reflect a country's ability to integrate industrial technology and management capabilities. It can be said that drawing standards are the soul of drawings.

If you lose your arm, you can live, but if you lose your soul, you can't live.

The same applies to the drawing standards of the drawings.

The author once heard that due to a party and a country deliberately blocking the basic knowledge of drawing standards for drawings, most factories in my country lack drawings, and a few machinery factories and arsenals that can obtain drawings are also highly dependent on foreign patented technology, and lack of systematic With the support of sexual cartography, self-development cannot be achieved, and there is a lack of guidance and future direction, which essentially limits the process of my country's transformation from an agricultural country to an industrialized development.

The strength of industrialized countries does not need to be explained again. In the current weak and low-level industrial situation in my country, in the absence of systematic cartographic standards, the primary task should be to establish its own cartographic standards as soon as possible, and a set of winning bids.

After the establishment of the drafting standard, we should gather the strength of the whole country to develop the iron and steel industry and the chemical industry, in order to cope with the Japanese invaders peeping at the heart of China.

Pattern is language, chemical industry is blood, steel is body, and building guns and weapons cannot be separated from these three things.

When the Japanese invaders perish, my heart will not die, and when Europe and the United States perish, my heart will not die.

The author is not talented, and is willing to contribute to the realization of the eternal foundation of China's industrial development, and strive to establish a set of winning bids. He worked hard for thousands of days and nights, traveled to Europe, America and the Soviet Union. After many difficulties, he has now compiled the first Chinese drafting standard. Ministry of "Mechanical Drawing", hoping to help my country's industrial development path.

The first creation, if there are any shortcomings, I hope to point out.

"Da!" A match screeched, and in an instant, white smoke from cigarettes filled the editorial office.

Quiet.

Inside the editorial office, it was unprecedentedly quiet.

"Well written, it's really well written... For the time being, regardless of the later drawing standards, this article alone has a high level of content. It ranks among the top three articles that the third right has read in his life. I don't know this Mr. Zhang San. Who is it, if you know where he is, the third on the right must invite him to Tsinghua as a professor."

Wen Yiduo took a deep puff of cigarette, his eyes gleamed, his right hand clenched tightly, resisting the excitement in his heart, and commented: "Great talent! A great talent that is rare in the world!"

"Students think so too." Seeing his editor-in-chief doing this, the young editor bowed slightly and nodded in agreement.

Wen Yiduo spit out a smoke ring, his eyes were a little lost, and the white smoke continued to emit.

Seeing Wen Yiduo's appearance, the young editor knew that he was thinking, did not disturb him, and waited quietly.

A cigarette slowly burns out.

Wen Yiduo threw away the cigarette butt, stood up, his face was serious and dignified, glanced at the manuscript in front of the desk, and said: "Go, invite Hongjuan, Yuehan, Kaiyi, go! By the way, And Heshou, as expected, this article can’t be reviewed by me alone as editor-in-chief, isn’t Kaiyi organizing professors and outstanding students to compile mechanical drawing standards? Tell him, a big surprise is waiting for him.”

"Students understand." The young editor was slightly shocked when he heard that, watching the battle, it was the rhythm of the collective review of Tsinghua professors.

Take a look at who these people want to invite, Ye Qisun, Dean of the Faculty of Science, Mei Yiqi, the President, Zhuang Qianding, Head of the Department of Mechanical Engineering, and Chen Yinke, the Deputy Editor-in-Chief.

After agreeing, he left quickly.

"Zhang San, no matter where you are sacred, you have worked hard day and night for thousands of days, the third right will make it appear in the world, and never fail your trust, you are a hero, an unprecedented hero, one who deserves to be treated by the country and the world. The hero that the nation will always remember..." Wen Yiduo sat down again, looking at the "Mechanical Drawing" manuscript that was not too thick on the table, his eyes were dazed, and he muttered to himself.

(End of this chapter)