my scientific age

Chapter 315 Final Acceptance!

The completion of the first phase of the project will make the industrial version of the base area reach the 1.5 level, achieve partial electrification, and have the main heavy industry categories at the basic level.

The second phase of the project will make the industrial version of the base break through an important threshold, fully enter the electrification era, reach the level of industrial version 2.0, and have a medium-level complete heavy industry system.

Note that this is a complete heavy industry system, not a complete industrial system, there is a great difference between the two.

As for the realization time, Yu Hua estimates that the first phase of the project will reach the highest level within three years, and the second phase of the project will take more than five to seven years.

After all, the factors of war and the lack of its own strength are there. To develop industry, firstly, technology is needed, secondly, technicians in units of [-] are needed, and thirdly, workers in units of [-] are needed.

Can the base be able to bear it?
No.

Yu Hua, who stayed in the division headquarters of Lantian Village, spent a lot of energy and effort, using the thinking computer to carry out deductions again and again, and finally perfected the internal layout of the entire Yulin Iron and Steel Plant based on the prototype of the iron and steel plant discussed with Professor Zhuang at the beginning.

After completing this matter, Yu Hua turned his attention to the entire Sanchawan area, touched his chin, and thought about whether to carry out long-term planning, based on the Yulin Industrial Zone with the steel plant as the core.

There is no doubt that the entire Yulin has the potential to become an industrial base.

With Shenmu on the left, Jingbian on the right, and Yimeng on the north, Yulin has a unique advantage in developing heavy industry.

If Sancha Bay is the core, heavy industries headed by iron and steel plants and thermal power stations are arranged on the right, and the [-]-square-kilometer area on the left is planned for machinery manufacturing and military industries. Power supply, heavy industry chain base for machinery manufacturing, and the production of various industrial raw materials are continuously supplied to military production.

In the future, based on Sanchawan, the Yikezhaomeng Industrial Base will be expanded to the north, and the various surrounding industries will be combined to form an unprecedented Yuyi Industrial Base in China.

This is an industrial base in the true sense and an important link towards a complete industrial system.

With the Yuyi Industrial Base, the industrialization process can be started in advance, and an epic myth unique to China - a complete industrial system can be planned.

"From the perspective of long-term planning, if the Yuyi Industrial Base can be formed, it indicates that the organization will no longer need to rely on the Northeast Industrial Base to plan development as it once did, but will be able to accumulate strength early... But it is too difficult to achieve this level. , it was not achieved by me alone.”

Yu Hua's thoughts were glowing, but after thinking about it, he had to temporarily give up the idea and shook his head gently: "Besides, with my current knowledge reserve and academic level, it is not enough to support such a huge plan, and the long-term plan is temporarily put aside. , talk to the professor first."

After the words fell, I temporarily put aside the idea of ​​Yuyi Industrial Base based on Sanchawan.

The whole person got up holding a stack of design drawings and went out of the house.

The design drawing of Yulin Iron and Steel Plant has been completed, and the next thing to do is to start this vigorous construction work.

As for the review of the design drawing organization and the evaluation of the expert group, I am sorry, but it has not yet appeared in this era.

As the creator of this blank drawing paper in Sanchawan and the developer of oxygen top-blown converter technology, Yu Hua has the final say.

As the design drawings of the Yulin Iron and Steel Plant were freshly released and handed over to the Public Works Section and the First Division of Hong, Yang Wu, the commander of the engineering team, ordered [-] soldiers from the Shenmu Highway Project, carrying tools and equipment, to The division headquarters gathered, counted the personnel and materials, and then set off for Sancha Bay.

Regarding the materials and equipment required for the oxygen top-blown converter project, the transportation started as early as after the original meeting. Most of the materials and equipment have been delivered to Sanchawan these days.

"Boom!" At the center of Sancha Bay, there was a dull and powerful impact. A soldier in a gray-blue military uniform smashed the stake with a hammer. Then, the whole stake seemed to be like a Like a nail, it sank into the ground.

This is the first wooden stake in Yulin Iron and Steel Plant.

"Boom boom boom!"

Immediately afterwards, the [-] soldiers of the First Red Division gathered here, slamming the hammers in their hands and driving the wooden stakes into the ground.

The scene was extremely hot, the hammers rang out one after another, and a rapid and passionate piling symphony was played.

One hammer after another, the wooden stakes were pushed into the ground, the stone drums repeatedly rolled and leveled the site, made formwork, and various building materials such as cement, adobe and newly fired cement were continuously transported by horse and bullock carts.

The steel plant project starts with the test furnace and the blast furnace. The most core parts are built first, and then the supporting facilities are gradually improved, which is exactly the same as the construction method of the Yancheng Sulfuric Acid Plant.

As the designer, Yu Hua stayed at the construction site of Sanchawan, providing technical guidance to the construction team of the First Division of Red, so that the construction of the steel plant could be put on the right track as soon as possible.

Although the blood of the noble infrastructure madman flows in every soldier's body, due to the lack of technical guidance and knowledge, they still do not know how to use the power of blood in this era.

Coincidentally, Yu Hua, who has mastered countless advanced knowledge, is the mentor who helps everyone awaken the bloodline power of the infrastructure madman.

Go forward, Red First Division.

Go ahead, infrastructure freaks.

……

Liushugou, machinery factory.

The newly established machinery manufacturing factory, which is adjacent to the arsenal, is mainly composed of a new adobe house. The first phase of the project covers an area of ​​about three acres and is divided into six workshops, covering turning, milling, boring, Drilling, grinding, planing, Schuler [-]-ton air hammers are assigned to electric steel mills.

In the turning workshop, a large-scale high-precision lathe is lying quietly in the middle, with a net weight of two and a half tons. It adopts a three-jaw chuck with a maximum turning diameter of 600 mm and can process workpieces up to 3 meters long. The bed is brand new and clean, with silver-white balls. The bright screw is dazzling, and the bed is filled with a faint smell of lubricating oil, revealing the unique temperament of advanced manufacturing everywhere.

Zhuang Qianding and five workers carried out various inspections around the lathe, and Lin Wan stood beside him as an inspection data recorder, responsible for recording every inspection data.

As an existence with noble German blood flowing in the body, GROB lathes are undoubtedly the top nobles in the lathe forest. The small lathes assembled by the arsenal are like pearls of rice in front of this GROB lathe. as bleak.

From receiving the first batch of German-made mechanical processing equipment to the present, Zhuang Qianding carefully assembles it according to the engineering installation steps and instructions, and then debugs many times according to the instructions. The machining accuracy of the big guy is adjusted to the best state.

Now, Zhuang Qianding is in the process of the purchaser's 'final acceptance' link stipulated in the manual.

Final acceptance is the last debugging and acceptance after the machine tool equipment is delivered to the buyer before the official production. The main content is to process the test piece, check whether the main parts of the machine tool meet the requirements, whether the parameters of the machine tool meet the requirements, and whether the geometric accuracy and position accuracy of the machine tool are qualified. , whether the movement of the machine tool is correct.

Passing the final test means that this GROB lathe can officially start production.

Time passed, and after more than ten minutes, with the confirmation of the last inspection, Lin Wan recorded all the inspection data, and the final test came.

In the turning workshop, five old turners from the Guantian Arsenal held their breath and stared at the GROB high-precision lathe placed in the middle. This was a lathe they had never seen before, both in terms of weight and machining accuracy. And processing size, all crazy stimulate the nerves of five old turners.

Also, during the third test and debugging yesterday, they saw with their own eyes that Zhuang Qianding used this German GROB lathe to turn the test piece into a mirror-like smooth and clear shape.

Mirror turning!

This professional term, to the five old turners, was like a frog in the bottom of the well suddenly ascending to the sky and seeing the whole world, and the shock in their hearts was almost incomparable.

God, do you want to be so exaggerated to turn the workpiece into a mirror-like effect?

Tap the screen to use advanced tools Tip: You can use left and right keyboard keys to browse between chapters.

You'll Also Like