The big era starts in 1983

Chapter 129
Finally, seven thirty-five.

The host just stood up and went straight to the screen without saying a word.

As soon as the picture appeared, Bai Hao was stunned. Everyone in the Ninth Branch Factory, including those who knew Bai Hao, burst out laughing.

In the picture, Bai Hao is sitting on the driving car in the first workshop of the Ninth Branch Factory, looking as if he is about to jump down.While driving, Li Sanpao scolded with a wrench, Feng Yuchun and Wu Qianye persuaded: "We promise not to change it, this time it is definitely the final draft."

"No, you write a letter of guarantee."

"Okay, okay. Let's write."

Only then did the host come out to speak: "This young man is the director of the ninth branch of Gongdian. Three driving trips, threatening all participants to finalize the draft, instead of temporarily adding amendments."

"In this way, in such a simple environment, the prototype of Xia Guo's first self-designed and self-manufactured boring and milling four-axis machining center was built."

When the screen turned, it was full of people with oily faces.Get out from the gap in the machine, and give a thumbs up to the camera.

The machine moved.

A galloping horse is carved in relief.

In the next picture, students wearing black glasses and military coats are constantly calculating and recording at the table, as well as the piles of experimental data, the piles of discarded drawings, and the piles of discarded accessories beside them. .

This is not news, this is an edited documentary.

It tells the whole process from a pile of drawings to a prototype machine, to a failed purely domestic accessory machine, and to the final design of a quasi-mass-produced machine.

All important frames are skipped and blurred when shooting data.

Only the pure aluminum statue of horse stepping on a flying swallow, which was processed continuously by a machine at one time, was completely preserved.

A real insider.

They could see the precision of the machine, the power of the machine.

This is a true four-axis simultaneous machining center.

"Oh my goodness……

"Well just play...

"Wow……

In a dilapidated upstairs in Phoenix Mountain City, a 40-year-old man opened the window and rushed out, pointing at the TV and yelling out the window: "Jiu see, this is my eldest nephew..."

Zhang Jianhua, he is even more excited than Bai Hao's adoptive father, Zhang Jianguo. Fortunately, there are no smartphones in this era.Otherwise, he can slaughter the circle of friends.

The news has come to an end.

The beginning of Bai Hao's story is still Bai Hao's ending.

A picture that has been blurred infinitely, Bai Hao pointed at the picture and shouted hoarsely: "Five axis, this thing is the key to the five axis." No one can see clearly what the picture looks like.

But there was a voice: "There is only a gear material in it, 200 million will make a sound."

Another voice came: "I guess, there are not hundreds of assembly tests, and the results can't be calculated just by looking at the theory."

The screen stopped, and the host's voice came: "Five axis, they are still working hard, and there is a long way to go."

At the end of the news, a free advertisement appeared.

How many catties of banknotes per second does Xia Guoyi's advertising cost?

Anyway, expensive as hell.

But this time it was given 30 seconds.

On Jingzhao No. 160 machine tool, [-] boring and milling machining centers are available for reservation this year. Manufacturers in Xiaguo are requested to contact the Heavy Industry Department of the Ministry of Industry and send professionals to prepare for relevant training.

160 units, this is the limit output of Jingzhao No. [-] machine tool, and it can only be completed with three shifts and overtime every day.

This is no ordinary mobile phone machine tool.

Moreover, assembly and debugging require extremely professional knowledge.

Bai Hao, who was sitting inside the city wall and entered the house for the third time, looked at the TV and his head was a little confused. The five-axis was just a sketch, and the situation at the time was not about five-axis, but a two-axis rotating synchronous working turntable. A diagram of a small workbench.

This is the theory that Bai Hao brought to several professors from his previous life.

In the double rotary table structure, the rotation of the fourth axis affects the attitude of the fifth axis, and the rotation of the fifth axis cannot affect the attitude of the fourth axis.

That is to say, Bai Hao is in the form of double turntables in the five-axis, not the double swing head form used by the little Japanese.

It can be said that if it succeeds, it will surpass Little Japanese's five axes.

But it is a pity to say that the five-axis has no edge yet.It can only be said that this table is the key to the five-axis, but it is not the only one.

So what does leadership mean?

Slap the little Japanese in the face?

Not so much.

Temporarily unable to figure it out, Bai Hao patted his face and sat up. He needed to think more about this matter. He worked hard on his own affairs, dug up more money from foreign countries, and then studied his own technology. Don't worry about the rest.

Bai Hao figured it out.

Change clothes and go back to the factory.

Bai Hao made the news a little impulsive, and he wanted to go back and gather people to calculate the vector data again.

This massive amount of calculations has put the computer down.

Bai Hao figured it out, and went back to work energetically.

But Obayashi Yokoji couldn't figure it out.

why?
The combination of these two consecutive pieces of news almost cut off the way of Tosiba's heavy machinery, heavy equipment, machine tools, etc. in Xiaguo.

Bai Hao!

Obayashi Hengji's eyes were full of anger, he finally understood that Bai Hao's invitation to drink tea was not to show weakness, but to demonstrate.

The origin of Jingzhao No. [-] Machine Tool Factory needs to be investigated immediately.

immediately!

It was already 08:30 when Bai Hao returned to the No. [-] Branch Factory. He parked the car in the factory, went back to the office to change his work clothes, and then rushed into the first workshop. When he entered the door, he shouted: "Today, we will recalculate the values ​​of the vector UVM."

The four-axis machine in the workshop is processing gears.

Can the gears that can be machined with four axes be ordinary gears?Certainly not.

Wu Qianye turned his head and glanced at Bai Hao: "Forget about the ball, you have no money and no equipment, forget about having the ball. The equipment you bought is nowhere to be seen, and there is no new gear material, so it is useless for you to figure it out."

Feng Yuchun also sneered: "Watching the news is like drinking two taels, you really are still a baby."

However, Lin Heming, who was observing the machine, did not laugh at Bai Hao: "I am also very excited. I feel that the accuracy of this grating can be higher. I heard that I want to buy two sets of equipment. I will pay some material fees and we will rebuild it." Try two."

Machines related to light are ridiculously expensive.

After being told by the three professors, Bai Hao lowered his head: "Okay, I'll make a budget to see if the money is enough."

Seeing Bai Hao preparing to leave like an eggplant beaten by Shuang, Feng Yuchun couldn't help laughing.

A group of students rushed up to lift Bai Hao up, and then threw him high.

They succeeded.

Four axis, this is the most important page written in their lives.

They created Xia Guo's self-developed four-axis from scratch for Xia Guo, and it is not worse than the four-axis of Wa Island in theory.

How many days and nights.

How many times the data is wrong.

How many times the gear set locked up.

How many times the two-axis mutual interference card machine.

How many sleepless nights.

After laughing, they cried together. A group of annual ring people aged up to 35 years old and at least 23 years old cried into tears.

(End of this chapter)