The big era starts in 1983

Chapter 80 The prototype of the 4-axis appears in the world

Chapter 80 Four-axis prototype appears in the world
Bai Hao leaned on the hammock in a daze.

Guo Fengxian signaled not to bother.

He knew that Bai Hao cared about the machine tool in the room, and even more about the cooperation with Haas Group.It is estimated that this will be something difficult, which will make Bai Hao quiet for a while.

Walking to the door of the small workshop, Li Qiang took out a tray: "Leaders, all the matches, cigarettes, perfume..." Li Qiang said a lot of things: "You can't bring these in, and you have to change your shoes."

"We'll do it."

Guo Fengxian saw that the ground in front of him was made of wooden frames, rattan boards and straw mats. It is definitely not suitable to walk in with shoes on.

He originally thought this was a beautifully tidied conference room.

He was shocked when he entered the house.

In this room, there are straw mats on the outside, and wooden boards that have been wiped very clean inside, and then there are two machines.One has been sealed with a tarpaulin, the other is working, and the average age of the people next to it is no less than 60 years old.In the outer circle, they are all 30 to 40 years old, and they are recording the data very carefully.

four axis.

Guo Fengxian understood that it was a four-axis machine.

It didn't wait for Guo Fengxian and others to be surprised.

At this moment, there was a sudden click, and the machine stopped forcibly.

Standing at the door, Baishan spoke at this moment: "There is a problem with the synchronization. The base rotates a little fast, about three times faster per second. The speed of the knife over there is normal. There should be a movement of withdrawing the knife just now, but the movement is slow. A little so stuck."

"Expert." Feng Yuchun grabbed a handful of hair on his head, turned around and asked, "Where is the problem? The reason is that there must be nothing wrong with it. Bai Hao and I tried it with another machine and it didn't go wrong at all. .But this one has problems as soon as it is running, and the problem lies there.”

After finishing speaking, Feng Yuchun looked at Baishan: "The old comrade has a good eye. This problem was also there last night. Our master Li Sanpao saw it. We made some changes, but there was still a mistake."

Li Sanpao looked towards Baishan, and the two got closer to each other.

know.

Both of them are workers, but Li Sanpao is at most the treasure of Gongdian.Baishan is a national treasure craftsman.

"Master Bai, I'm Li Sanpao. I heard you talk about new crafts in Jiangnan seven years ago, do you remember?"

Bai Shan didn't answer, but ran to the machine and observed it inch by inch.

Li Sanpao fully understood this reaction, and he felt the same way at the time.

He is hotter than looking at his own grandson.

Guo Fengxian stepped forward to introduce a few words, and also greeted the people present. As far as he had seen, there were people from Jingzhao Jiaotong University, the University of Technology, and military electronics in this room, and they were all real people. level professor.

Twenty minutes later, Li Sanpao approached Baishan: "Old man Bai, Haozi mentioned something yesterday afternoon, he said that the machine was useless, and we checked it for a full hour after the card shut down, and only found one that was very worn out. Gear, we reworked one that was already replaced."

Bai Shan nodded: "This machine is indeed useless. If you don't believe me, you can process a workpiece with a tolerance of more than ten wires and about twenty wires. It will definitely work."

When Bai Shan said this, Professor Wu Qianye from the University of Technology came over and asked his doctor to measure the machine.

"It turns out that the guide rail is slightly deformed. The servo motor we installed is not very good. The rotor over there is a bit skewed."

Ugh!
Feng Yuchun sighed heavily and sat on the ground.

The four axes work together at the same time. The principle is correct, but in actual operation, the machine cannot synchronize the four axes with a gear error.

Li Sanpao comforted: "Old Feng, it's okay. Let's start again, we are only a few steps away."

Wu Qianye's face was dark: "We already have the best guide rails and the best servo motors that can be processed in Qinzhou. If you use Haas parts, there will be no problems, so it means they are ours. Things are not good. If we want to use our own things 100%, we are far from the old nose, not a few steps away."

The pouring of cold water made everyone realize the reality.

At this time, Bai Hao opened the door and came in: "Several teachers, hurry up and reassemble one and debug it. Three days later, I want to set up a situation. If it goes well, the problem of parts can be solved from the root cause. Let's go and find someone Have a glass of wine and ask about the situation by the way."

Bai Hao was about to turn to Bai Hao and suddenly stopped: "Bai Hao."

Bai Hao stopped in his tracks, his mind was full of thoughts about the problems he was going to face next.

Bai Hao stared at Bai Hao: "Clarify the matter, the one present is not an elder, not a leader?"

Bai Hao patted his head lightly, and immediately put on a smiling face: "I'm so busy and confused, it's my fault, my fault." Guo Fengxian didn't mind: "Don't panic when you are under pressure. long."

"The situation is like this. I received a call. The president of the Haas Group suddenly fell ill. Totak, who was originally planning to come, gave up the itinerary, and Catherine came here instead. I guess it should be a part of the battle for the throne. This matter Outsiders cannot participate, but they can provide necessary help. This is the case.”

Bai Rong asked again: "What is this Catherine's position in Haas Company?"

Bai Hao replied: "Catherine David Haas!"

It is enough to report the full name, which represents identity and status.

Bai Rong asked again: "Then who are you going to drink with?"

Bai Hao replied: "Jeff David Haas."

Bai Hao glanced at Li Qingyue, and waved his hand after Li Qingyue nodded slightly: "Go, come back here at night, we won't leave, I have business to discuss with you."

"En." Bai Hao nodded, turned and left.

Seeing Bai Hao leave, Bai Hao looked unhappy: "Did this kid do it on purpose, or is he really stupid?"

Li Qingyue asked back: "Can you do it?"

"What do you mean?"

"Your name is also Bai (Hao)."

Hao and Hao have the same pronunciation, and Bai Hao has done such a big thing at this age, but Li Qingyue didn't explain what he meant by asking rhetorically.Instead, Guo Fengxian gave an explanation: "Sometimes geniuses are lonely. Their brains turn in a different direction from ours, so naturally their ideas will be different."

Regardless of whether this explanation is correct or not, it gave Bai Hao a step down.

Li Sanpao came over and said, "Leaders, old man, let me say something on behalf of my son. This is really a big deal. If my son can't eat or drink well, his head is naturally a little dizzy. It's not that I don't respect the leaders."

"It's okay, it's okay." Guo Fengxian didn't mind at first, just as he followed Li Sanpao's words: "Master Li, tell us about this machining center, it's a treasure."

Li Sanpao quickly waved his hand: "I can't, I'm stupid."

Wu Qianye was pushed over.

Wu Qianye thought for a while: "These days I'm also thinking, why can't we make five axes? I thought it was because we didn't understand five axes at all. Over the past two months, we have understood."

"Wait a minute." Guo Fengxian immediately asked the secretary to prepare a pen and paper.He wanted the secretary to write down what Wu Qianye was about to say.

(End of this chapter)

Tap the screen to use advanced tools Tip: You can use left and right keyboard keys to browse between chapters.

You'll Also Like