The Light of Domestic Products: The whole world begs me to sell

Chapter 6 If the dead can come back to life, it is Nirvana rebirth

Phoenix brand suddenly became popular because of an announcement of trade-in.

Hu Lai never thought that the people of Yan Kingdom would be so enthusiastic about the Phoenix card.

The company introduction and event details that were produced were played in a loop in the live broadcast room. Although no one was live broadcasting, there were always hundreds of people in the live broadcast room.

On the second day after the general meeting, Han Ming successfully transformed the production line of "MQ-1 spraying polymer composite material". When the first batch of spraying materials was mass-produced and tested, Han Ming was completely shocked!

"I just don't know where you got such a powerful technology!"

Han Ming was very excited. This spray-on polymer material has never been used in the bicycle field.

I used to only know that carbon fiber is a polymer material, but I didn't expect that there are spray-on polymer materials!
He sprayed the polymer composite material on the disassembled 0.5-bar frame, and the high-carbon steel body formed a layer of [-] mm high-strength composite material.

After waiting for the composite material to be fully finalized, a brand new [-]-bar was reassembled. After testing, the strength of the body actually improved a lot!

Hu Lai proposed to try the maximum load. Unexpectedly, when the tire was close to the limit of 900 catties, the [-] bars could still drive stably.

The strength of the frame can fully bear the weight of 900 catties!

If better tires are used, the maximum load may be even greater!
It is not inferior to alloy steel at all!

Looking at the test results, Han Ming felt even more excited.

Bicycle frame design has always been a balance of weight and strength.

In theory, the lighter the car, the easier it is to ride and the faster it is.

However, the light weight of the body will also reduce the impact strength of the frame.

You can't have both.It's hard to be in balance.

All the low-end city commuter cars on the market are made of heavy high-carbon steel, so the weight of the body has never been reduced.

The formation of polymer materials can completely solve this problem. After spraying with lightweight materials, it can not only achieve lightweight, but also maintain the strength comparable to high-carbon steel!
Not only that, but the most important thing is that spray-on polymer materials are also very cheap!

Hu Lai was also very excited, although he already knew the actual effect by checking the detailed information of the system.

But when the real thing appeared in front of his eyes and looked at the experimental data, he was still shocked by the black technology!
This is comparable to or even surpasses the existence of carbon fiber.

He couldn't help thinking, if it is used on a bicycle rack now, if it is used on a motorcycle or a car, can it still have such a good effect?
Before I had time to think about it, the frames of more than 8 [-]-bar vehicles in the warehouse still needed to be dismantled and sprayed.

Now the factory is short of manpower, even Hu Lai rolled up his sleeves and started working.

When everyone saw Hu Lai, they all worked in person and worked harder.

Everyone worked together, and it took only one day to spray paint all the [-] [-] big bars that were going to be sent to the mainland of the chief, and they were directly loaded and sent to the port, and lined up to board the ship.

Han Ming's production line was successfully started, and good news came from Jiangbeichuan within two days.

With the help of technical drawings, the research and development of the transmission system has been successfully realized, basically reaching the indicators on the technical drawings!
Now everything is ready, only the frame is missing.

The frame is the most important part of the bike and also the heaviest by mass.

It needs to withstand most of the impact strength during use. The mainstream used in the market is high-carbon steel, chrome-molybdenum alloy steel, aluminum alloy, and carbon fiber.

Low-end bicycles are basically made of high-carbon steel because of cost control.

High-carbon steel is heavier, so it is naturally more laborious to ride and less sensitive to handle.

Especially when encountering the need to move the bicycle manually, it is a bit difficult for women to move it.

Hu Lai had already had an idea in his mind, and he planned to use a resin with lighter weight and better toughness.

Resin is cheap, and the only shortcoming is poor rigidity, but polymer composite materials can just make up for the shortcoming of insufficient rigidity.

The resin model has been prepared a long time ago, and now we are waiting for the experimental results after spraying polymer materials.

The painted frame is assembled into a complete vehicle and pulled into the test field.

After going through a complete strength test, everyone was shocked again!

"This polymer spraying material is amazing! It's completely black technology."

"I doubt that using wood as a mold and spraying materials can achieve such high strength!"

"Where does Hu always get such awesome materials!"

When Hu Lai saw the experimental data, he finally breathed a sigh of relief.

The resin sprayed with polymer composite materials has an overall strength comparable to that of high-carbon steel, and even a little higher rigidity than high-carbon steel.

Tough material resin can also achieve such a rigid strength, which is already very good.

The last big stone in his heart fell, and the next step is to produce new cars and prepare them for sale.

Hu Lai turned to Yi Yi and said, "Yi Yi, quickly contact the resin factory and ask them to produce [-] frames as soon as possible."

Then he said to Han Ming: "Director Han, please inform everyone in the engineering department to have a meeting in the conference room immediately to determine the matching of various parts of the new car."

After arranging his work, he went to the meeting room first.

Everyone was very efficient. In less than 10 minutes, Director Han and the engineering department all arrived in the meeting room.

Hu Lai held the inventory data provided by the warehouseman Li in his hand. He handed it to Han Ming, and everyone circulated it.

After everyone had read it, Hu Lai broke the deadlock first.

"Now the factory only has the last 30 yuan of funds, and everyone can only refer to the existing inventory to match parts."

Everyone knew the predicament in the factory, and there was no unnecessary nonsense, and several people discussed it enthusiastically.

Han Ming and the three people from the engineering department discussed for more than half an hour, combined with the inventory data collected by Lao Liu, and finally made up 5000 sets of complete vehicle parts.

Hu Lai couldn't help laughing as he watched everyone calculate the full amount of 30 yuan, "Now there's really nothing left in the company's account."

"It's a last-ditch battle this time, and it depends on whether it can be reborn from the ashes like the name of the factory."

Han was obviously a little excited: "Yes, definitely."

Jiang Beichuan also said at the side: "Boss, the new car has been finalized, but it still lacks a name. Why don't you choose a name."

Hu Lai thought about the current desperate situation of the company, and two words popped up in his mind: "Nirvana."

He thought for a while and said: "It was born in the desperate situation of the company. If it can be brought back to life, it will be reborn from Nirvana."

"Just call it 'Nirvana'."

"Nirvana?"

Everyone was amazed, the name really fit the occasion.

After confirming the name of the new product, Li Li from the design department began to design a series of advertisements and posters.

All of a sudden, everyone in the factory was busy.

A few days later, as the last process of painting was completed, the first batch of ten real cars finally appeared in front of everyone.

According to Hu Lai's idea, the real car uses five colors.

Girly pink, blue, yellow, green, silver gray.

All bright colors except silver gray.

And girly powder has become the main color system this time.

Ten cars were parked quietly in the open area of ​​the factory, and the employees in the factory formed a circle.

They deal with bicycles every day, and they have seen many new cars, but they can't help being amazed at these brightly colored bicycles.

"This girl fan is too cute, uh, grass green is also good."

"Is this green color designed by the boss? How do you feel that you have rich experience!"

"I'm going... how can I hold on to this pink color..."

"Silver gray with classic retro style is really eye-catching, and the design a few years ago still looks just as pleasing to the eye!"

The sun shone brightly on the painted surface.

Hu Lai boldly adopts bright colors in color, adding a youthful atmosphere to the retro models.

(End of this chapter)