Manufacturing Empire in the Valley

Chapter 63 On-Site Test Machine
Fang Dongping stood up after finishing speaking: "We have almost had a rest, Boss Jiang, let's go, take me to see the machine tool, after I have seen it, I will formulate a specific modification plan."

Jiang Ronghua nodded, and led the two of them to the rightmost room.When he passed the door of the second room, he told his daughter who was watching TV: "Hongmei, you catch a chicken and kill it later, and I will have a good drink with Fang Gong later."

Fang Dongping didn't wait for the girl to answer, he interjected, "Boss Jiang, according to the rules, you can't drink alcohol at noon, otherwise how can you work in the afternoon?"

Of course Jiang Ronghua understood this, just now he just wanted to earn some performance so that Fang Dongping could work harder.Hearing this now, he immediately got off the donkey: "In this case, we'd better wait until evening to eat roast meat."

Niu Xiaoqiang glanced at the [-]-inch black and white TV in the room, and couldn't help being impressed by Boss Jiang's financial strength again.This is a [-]-inch Jinxing brand electric TV, nearly twice the size of the [-]-inch TV at the old branch secretary's house, and the price is at least six or seven hundred.

The three of them quickly walked into the room on the far right. They really didn't know it without looking at it. It was amazing to see that this room was connected to the next room, and it was expanded at the back. Ninety square meters.

There are two machine tools on the left and right sides of the house. Niu Xiaoqiang also recognized the one on the left as a milling machine. As for the one on the right, he has never seen it before.

Fang Dongping was stunned for a moment when he saw the machine tool on the right, then walked quickly to the machine tool, and sighed: "It's really unexpected that you still have a Soviet-made bull planer here, which is rare."

During the friendship between China and the Soviet Union, the Soviet Union helped China establish a relatively complete industrial system, and many of the machine tools were directly donated by the Soviet Union.Among these machine tools, bull planers are the most common, most of which are second-hand products eliminated by the Soviet Union and have been used for several years.But for China at that time, even second-hand products eliminated by others were still baby bumps.The master workers cherish these machine tools very much, and the maintenance work is very good, so until now, there are still many small factories in many places still using these machine tools.

Jiang Ronghua thought that Fang Dongping felt that his equipment was too shabby, so he smiled awkwardly: "I borrowed money from relatives and friends to buy this planer after I resigned from the factory. It cost more than 2000. It's old. It’s a bit out of date, but it’s still usable.”

Fang Dongping didn't seem to pay attention to Jiang Ronghua's words, but continued to sigh on his own: "I think when I went to the Soviet Union to study industrial manufacturing technology, the first thing I came into contact with was this kind of planer. It's been almost 30 years... "

It is precisely because Fang Dongping had studied in the Soviet Union that after the Sino-Soviet relationship turned bad, he was labeled as a collaborator and treason by his students. Thinking about those years is painful and desperate.

"Master, what is this planer used for?" Niu Xiaoqiang was very curious about the planer and couldn't help asking.

"The function of a planer is similar to that of a milling machine, but the technical content is relatively low, and the work efficiency is also much lower."

"Oh I got it."

Fang Dongping stopped thinking wildly, and asked, "Boss Jiang, which device is the main problem with?"

Jiang Ronghua looked distressed: "The main reason is that the surface produced by this planer is too bad."

Fang Dongping groaned, tilted his head to examine the planer carefully, and nodded while looking at him: "The maintenance work is indeed very good. This machine can be used for at least ten years. Old Maozi's things are durable. Well, the knife head is also very new, not bad.”

Jiang Ronghua was in a hurry to rush to work, so he couldn't help asking: "Mr. Fang, what do you think should be rectified?"

Fang Dongping smiled and waved his hands: "The specifics of how to change it still depends on the defective products you produced."

Jiang Ronghua immediately pointed to a few bearings piled up in the corner: "The defective products over there are all processed by a planer."

Fang Dongping nodded and walked over, greeting Niu Xiaoqiang: "Xiaoqiang, come and have a look."

"Good master."

The two squatted in front of the bearing, Fang Dongping did not stretch out his hand, but told Niu Xiaoqiang: "You check it first, and then tell me your opinion."

Niu Xiaoqiang nodded, picked up a bearing, and touched the smooth curved surface back and forth with both hands, without opening his mouth for a long time.

When Jiang Ronghua saw that Fang Dongping took the opportunity to teach his disciples, he couldn't help being angry and anxious, but he didn't dare to urge him, let alone express his dissatisfaction, so he could only stand aside and stare blankly.

Niu Xiaoqiang actually discovered the clue at the first time, but this is the first time he has carried out a real operation in a real sense, and he didn't dare to make too much of it, so he repeated the confirmation.

After checking all the bearings, more than five minutes had passed before Niu Xiaoqiang said: "Master, there are twist-shaped grooves on the curved surface of this bearing. There are two possibilities for this situation, either Either the clamp is loose, or the bit is not secure."

Jiang Ronghua had already checked himself. He used to be a fitter, so of course he knew the reason. Hearing this, he thought to himself: Isn't this nonsense?As long as someone who has a little understanding of processing technology can see the problem at a glance, it is one thing to know where the problem is, but whether it can find the exact crux point and correct it is the difficulty.

Fang Dongping nodded with a smile, "In that case, let's turn it on and check it out. This time, it's still up to you to operate."

Niu Xiaoqiang held back the excitement in his heart and agreed, then turned to look at Jiang Ronghua: "Uncle Jiang, please turn on the main power."

Jiang Ronghua was unhappy in his heart, but on the surface he nodded with a smile, went to the door and pulled the switch.

Niu Xiaoqiang went straight to the planer, turned on the power switch, and then the planer started humming.He took a discarded bearing and fixed it on the fixture, then adjusted the cutter head and started to test the machine.

Jiang Ronghua was anxious on the sidelines, but Fang Dongping was smiling all over his face, as if he was not worried that Niu Xiaoqiang would not be able to find a specific crux point at all.

Niu Xiaoqiang has followed Fang Dongping to the waste warehouse of the arsenal many times to conduct on-the-spot investigations. Fang Dongping will explain to him in detail the reasons for the failure of processing each piece of different waste. These are extremely valuable experience accumulations.In addition, Fang Dongping also connected the old milling machine eliminated in the factory to electricity, and let Niu Xiaoqiang practice the actual operation.

The raw materials consumed during the practice were all the scraps that had been seen before. Since these things were all equivalent to scraps, and Fang Dongping had a high prestige in the factory, no one expressed dissatisfaction at all.Over time, Niu Xiaoqiang honed his practical ability.

　Thanks to the book friend "Liguiyuan" for the generous 1000 rewards!bow!Thanks to book friends "20180121210256418" and "Espimas" for their support!bow!Asking for recommendation tickets, asking for favorites, Weiyu smiled and implored everyone to support, bow!

　　
　
(End of this chapter)