God-level industrial master

Chapter 150 It's Impossible
Tang Fei came, striding into the traction motor production workshop.

Followed by Wang Hailong and Zhao Ke, like Tang Fei, their faces were full of joy.Yeah, the traction motor is finally here, and that's something to celebrate.

"boss!"

"Boss, hello!"

Serious and Wang Weixin, two motor experts who have been staying at the production site to guide everyone in the production and manufacturing, saw Tang Fei coming, put down the things in their hands quickly, and said hello to Tang Fei.

Tang Fei saw this batch of traction motors, a total of six, neatly placed, obviously almost manufactured.

"How about it, is everything finished?"

Seriously, he said quickly, "It's almost finished, only the nameplate hasn't been pasted."

Wang Weixin said: "Boss, the nameplates of the motors are all ready, I hope you can stick them on by yourself."

"Oh." Seeing the nameplate of the motor in Wang Weixin's hand, Tang Fei was indifferent, took one of them, asked which one it was, applied adhesive on it, and pasted the nameplate on the motor body body.

There was warm applause all around.

Every motor has its nameplate, just like an ID card.There is a lot of information on the nameplate, such as the model of the motor, power, batch, production date, manufacturer, and so on.

There is a one-to-one correspondence between the nameplate and the motor, so before pasting the nameplate, Tang Fei had to ask which motor it corresponds to.

Tang Fei pasted the first nameplate with his own hands, and there are still five left, corresponding to the five motors in front of him.Tang Fei waved to Wang Hailong, Zhao Ke and others humanely.

"Come on, none of you posted a piece."

Pasting nameplates on the first batch of traction motors is a great honor and a reward, which not everyone can have.

Wang Hailong was very happy, took the nameplate and pasted it on the corresponding motor with his own hands.Then Zhao Ke, Yan Yan, Wang Weixin and so on.

A total of six motors were affixed with nameplates corresponding to their identity symbols. So far, the six motors have been completely completed.

Tang Fei waved his hand and said, "Hurry up and arrange an inspection, and then conduct a performance test. I want to know the result."

The traction motor is an important component of an electric locomotive, with high technical content and high inspection standards, which are also very strict.

Immediately, Yan Yan and Wang Weixin led two quality inspectors to conduct a detailed inspection of the two motors. Even though he knew it would take time, Tang Fei did not leave and stayed at the scene.

After more than half an hour, the six motors were basically inspected. This is because every process has been inspected during the manufacturing process, and many things do not need to be inspected repeatedly. Otherwise, the inspection will take longer .

After the inspection is completed, there is also a review of relevant materials, such as process card data in the manufacturing process, such as warehousing inspection records of spare parts, intermediate process inspection records, and so on.

These things don't need to be serious and Wang Weixin will do it himself, and ask a technician below to check it, and the quality inspector will review these things.

In addition to data review, there is another very important inspection, that is, the comprehensive performance test of the motor.This requires the use of a comprehensive performance test bench for the motor.

Red Star Factory has such a comprehensive test bench, they can conduct a series of performance tests on traction motors to test the quality of traction motors and test various performance parameters.

Considering that he will not only produce Shaoshan series traction motors in the future, but will also produce traction motors for AC electric locomotives, Tang Fei invested funds and built a comprehensive performance test bench.

There is a certain difference between this large-scale test bench and that of the Red Star Factory, because this test bench was designed by Luo Dong himself, and it was built in a corner of this new factory building. There is an area of ​​more than 300 square meters enclosed there. A comprehensive test bench.

Now that the inspection is completed, the comprehensive performance test will be carried out next.

Tang Fei said loudly: "Arrange the test immediately to see how the performance of our six traction motors is."

Seriously said: "Boss, it's ready, and the test workers are already in place, let's start the test immediately."

Following the serious personal command, the workers screwed the first motor to the lifting ring, hoisted the motor with a spreader, and hoisted it to the test bench.

The motor was put on the test bench steadily, and the test workers connected the wires, and after checking that they were correct, they signaled to the seriousness.

Seriously and loudly shouted: "You can start the experiment."

The motor starts and it works.Correspondingly, the comprehensive test bench is also working. As expected, it was designed by Luo Dong. It fully combines the trend of the times and adopts the current popular display screen. However, due to the limitations of the times, there is no LCD color display screen, only black and white screen.

But on these black and white screens, various performance data are displayed clearly and clearly at a glance.The entire test bench has also realized computer control, and the test data can be printed out through the computer to form a test report and a data curve.

Tang Fei was an expert. He looked at the performance data on these black and white screens, and felt relieved. The overall performance of this motor fully met his expectations, and it also fully met the technical parameters of Red Star Factory.

The first one, the second one, the third one...

A total of six traction motors were sent to the test bench to pass the comprehensive performance test, and the performance data were perfect.

Each one has printed the test results and performance data curves clearly.Tang Fei went through it himself and was very satisfied with the six motors.

Not only the performance is good, but the quality is also good.

This is a batch of traction motors from Jiuzhou Industrial Co., Ltd., all of which are qualified, to be precise, all of them are high-quality products, and none of them are defective products.

Not bad, very good.Tang Fei thought with satisfaction.

.........

Red Star Factory.

Xie Zhenhua has been quite busy recently. As the chief engineer and deputy general manager, he used to have a lot of things to do. Now the Red Star Factory is cooperating with Siemens to manufacture the first DJ4 electric locomotive. Because of the new car, many problems have been exposed during the trial production process.

Some slightly larger technical problems will come to Xie Zhenhua, Xie Zhenhua is unprecedentedly busy, working more than ten hours a day, and at least seven or eight of these ten hours are at the production site, personally looking at the parts of the DJ4 electric locomotive of production.

At present, it is the production and manufacturing stage of parts, such as wheel sets, chassis, bogies, car bodies, etc., all of which are produced by Hongxing Factory itself.

The key core parts of the DJ4 electric locomotive are provided by Siemens, which guides the Red Star Factory for assembly.

Only for very general parts, Hongxing Factory entrusts external suppliers to process and manufacture them. After passing the inspection, they are sent to Hongxing Factory for storage.

Now it is the manufacturing stage of the parts of the DJ4 electric locomotive. Strictly speaking, it should be the trial production stage, and there are many technical problems.

Xie Zhenhua is at the production site, personally dealing with some technical issues.His assistant trotted over, sweating profusely, "Leader, I haven't answered your phone yet. There is one thing I need to tell you."

The production noise is relatively loud now, and Xie Zhenhua is busy dealing with technical problems, so he really didn't hear his mobile phone ringing.

Xie Zhenhua said loudly: "What is it?"

His assistant said: "Jiuzhou Industrial Co., Ltd. has finished the Shaoshan type traction motors. The first batch consists of six units. They sent an invitation, please come and review the products."

If it is a general spare part, there is no need for Xie Zhenhua to do it himself. It is enough to have the technical director below, or even the technician in charge.

But the traction motor is extraordinary, and its importance is self-evident. At the beginning, Xie Zhenhua personally said that Tang Fei and the others made the traction motor, and he would come to review it in person.

What, already made, so fast!
Xie Zhenhua was slightly surprised, he didn't expect Tang Fei and the others to move so fast.In his opinion, Tang Fei and the others are making traction motors for the first time. Even though this is a mature product, there is still a complete set of technical specifications of the Red Star Factory.

In Xie Zhenhua's opinion, bumps and bumps are inevitable for the first production. He estimated that it would take at least one or two months for Tang Fei and the others to produce the first batch of traction motors.

Did not expect it to be so fast!

Hearing this, Xie Zhenhua became completely happy, and waved his hands: "This is a major event, inform the relevant personnel, we will go to Jiuzhou Industrial Co., Ltd. tomorrow morning to conduct the review and acceptance of the traction motor."

Xie Zhenhua counted the troops, called the roll call personally, and called several technicians in the traction motor and related quality personnel, and prepared to go to Tang Fei's factory tomorrow.

Chang Jinlin also knew about this matter. Hearing that Tang Fei and the others had already made the first batch of traction motors and they were just waiting for a review, he said it was impossible.

This speed is too fast!

In addition to being surprised, Chang Jinlin was also completely happy.If Tang Fei's Shaoshan series traction motors can be done so smoothly, doesn't that mean that the DJ4 electric locomotive will also go smoothly in the future.

By the way, we both agreed to develop the traction motor system of the DJ4 together, so we can start the research and development work.Chang Jinlin thought so.

There are no impervious walls in the world.

What's more, Siemens has sent a permanent representative to the Red Star factory, and the staff is not too small. There are more than 20 technicians, quality personnel, etc. in total.

The person in charge of Siemens' Hongxing factory also heard about this incident, what, Jiuzhou Industrial Co., Ltd. is making traction motors.

After hearing this, he was slightly startled, as if he realized something, and then a smile appeared on the corner of his mouth.

The Shaoshan series of traction motors are just the ones with much lower technical content. The fact that Jiuzhou Industrial Co., Ltd. can make this kind of traction motors does not mean that it can make AC traction motors.

After understanding this point, he still had a sense of crisis, but the smile that emerged from the corner of his mouth was somewhat disdainful.

He absolutely did not believe that Jiuzhou Industrial Co., Ltd. could make an AC traction motor.

.........

Three updates today, the third update is over!

(End of this chapter)