God-level industrial master

Chapter 218 Industrial Control Chip
Tang Fei admired Zhang Jianxiang very much.

In his own memory, Zhang Jianxiang seems to be a practical man. Tang Fei once read a biography about Zhang Jianxiang.He seems to have taken office last year. He took over the messy machine tool factory and first passed a series of drastic reforms.

Then they focused on the research and development of CNC machine tools. It was precisely because of this that their factory was completely revived. From a company that was on the verge of bankruptcy, within a few years, it became a leader in the domestic machine tool industry.

The CNC machine tools they produce are of high quality and low price, and are very popular in the domestic market, and some of them are sold to the Southeast Asian market.

Tang Fei knew that at this time, Zhang Jianxiang and the others should have just started the development of CNC lathes, probably because they encountered difficulties in servo motors and industrial control chips.

Zhang Jianxiang would be so happy after successfully ordering his own servo motor and solving the servo motor problem in one fell swoop.

It can be seen from Zhang Jianxiang's eyebrows that he seems to be much more relaxed and happier. He also thanked Tang Fei again and again, saying that he solved a big problem for them.

Tang Fei waved his hand and said loudly: "Our servo motors will be serialized, and there will be various models. You can order all kinds of servo motors that your CNC machine tools need in the future from us."

Zhang Jianxiang almost patted his chest and agreed: "Of course, all the servo motors needed in the future will be ordered from Jiuzhou Industrial Co., Ltd."

The matter of the servo motor was settled, and the atmosphere became unprecedentedly relaxed.

The two parties chatted heartily and covered a wide range of topics. However, it didn't take long for Zhang Jianxiang to receive a call, and the atmosphere changed a little bit.

After answering the call, his brows furrowed.

Curious, Tang Fei glanced at Zhang Jianxiang. He was fine just now, but why did the atmosphere suddenly change? Did something happen to him?

Zhang Jianxiang sighed, and said in a low voice: "Mr. Tang, to be honest, we are the first to develop a CNC lathe, and we have encountered many problems, among which the servo motor and industrial control chip are the biggest problems."

"You helped us solve the problem of the servo motor, and the problem of the industrial control chip is left. You know the situation in our country. The industrial control chip must be imported. Just now our purchasing manager called me and told me that the first batch of industrial control chips was settled, but It cost a lot, and the price of importing these chips is very expensive."

"This is only the first batch of chips, and it can only meet the development requirements of our CNC lathes. If we succeed in developing them in the future, when CNC lathes are mass-produced, we will need a large number of various industrial control chips. I am worried about the price we will pay in the future." It won't be small."

If you don't master the core technology, you are destined to be stuck by others.

Tang Fei pondered, and thought to himself, it seems that the chip field must be entered by itself, the mobile phone chip must be done by itself, and all kinds of industrial control chips must also be done, at least we can't let others keep our necks stuck.

After thinking for a while, Tang Fei said seriously: "Mr. Zhang, our company currently has plans to enter the chip field. We have already bought land in Shenhai City and plan to establish our chip R&D and manufacturing center there. In two years, all kinds of industrial control chips you need can be ordered from us."

"what!"

Zhang Jianxiang couldn't believe his ears. He stared blankly at Tang Fei with a very surprised expression. After several seconds, he finally came back to his senses.

Surprised: "Mr. Tang, this is true!"

Tang Fei said with certainty: "It's absolutely true!"

After receiving such an affirmative answer, Zhang Jianxiang suddenly became happy, and said a little excitedly: "Okay, great, this is the best news I've heard."

They need industrial control chips, especially after one or two years, when their CNC machine tools are mass-produced, they need a lot of various industrial control chips.

The industrial control chip is the core of the industrial control motherboard on the CNC machine tool. Without the industrial control chip, Zhang Jianxiang and the others would not be able to develop their own industrial control motherboard.

Huaxia's CNC machine tools have always had a relatively large technological gap with those of Western developed countries, and industrial control chips are definitely one aspect.

If Jiuzhou Industrial Co., Ltd. can develop and manufacture the world's most advanced industrial control chips, it will definitely be a huge boon for domestic CNC machine tool companies.

At this time, Zhang Jianxiang seemed to have taken a reassurance, pinning almost all his hopes for the industrial control chip on Tang Fei.

Tang Fei solved their servo motor problem, and even the future industrial control chip was settled. Zhang Jianxiang was in a good mood and insisted on treating Tang Fei with a treat.

So, at noon, Zhang Jianxiang took the east seat and asked for a private room in the Furong Building, and everyone had a good meal in a good atmosphere.

After sending Zhang Jianxiang away, Tang Fei focused on the follow-up design and development of his own servo motor, as well as the production and manufacture of the first servo motor.

A series of technical preparations and production preparations have been thoroughly rolled out, and various manufacturing equipment in the large factory building for the production of servo motors has gradually increased.

Today, the workers were surprised to find that a brand-new automated production and assembly line was placed at the predetermined location, which was very attractive.

This is something produced by the "God-level Industrial Owner" system!

The "God-level industrial master" system has five major system functions: exchange, research and development, summoning, missions, and effect gains.

There are not many things in the exchange column, but there is an automated production line for servo motors, which can carry out assembly and production of multiple models and types of servo motors.

Previously, when Tang Fei was preparing to make IGBTs, he needed a lot of production equipment. Unfortunately, the equipment in the exchange column of the system was limited, and there was basically no equipment related to IGBT production. Fortunately, he completed a system task and rewarded a mysterious big man. The gift bag, Tang Fei was lucky enough to get the whole set of equipment needed to produce IGBT from the gift bag.

Since the system happens to have an advanced servo motor production line, even if the exchange price is not cheap, it needs 850 gold coins to exchange for this current world's most advanced servo motor assembly line, which has a high degree of automation and high assembly efficiency.

The production equipment is gradually in place and has entered the debugging stage. After a while, we will be able to start trial production of our first servo motor.

.........

Deep Sea City.

It has been a while since Yang Chenglin and Wang Weihua came to Shenhai City, one is in charge of management work, and the other is in charge of technical work.

After the land is bought, it is positioned for the production and manufacture of chips.Now some pre-construction has begun. On the construction site, some construction machinery and some construction workers can already be seen.

Yang Chenglin is in Shenhai City, but he is also in charge of the product marketing of Jiuzhou Industrial Co., Ltd. He often needs to keep in touch with some customers, and the news is relatively well-informed.

No, he heard reliable news that there is an old machine tool company in Europe, and they need to purchase a batch of servo motors for use in their CNC machine tools.

After hearing the news, he used various resources and channels to make inquiries.Yang Chenglin is a person with ideas. Isn't his company planning to manufacture servo motors? Then can his servo motors enter the European market and realize export?

Exporting high-end motor products to European and American markets is something to be proud of. You must know that we have always spent a lot of money to import high-end motors from Europe and the United States. When will it be our turn to export to them? What?

With the idea of ​​exporting in mind and wanting to export his motors abroad, Yang Chenglin began to inquire and understand, and finally got something.

He finally figured out the basic information such as the quantity and model of servo motors that this European and American CNC machine tool company needs, so he temporarily left Shenhai City and handed over the work here to Wang Weihua for management, and he returned to Qingjiang City.

Back at the company, he personally reported the situation to Tang Fei.

"Oh, there is such a thing." Tang Fei showed great interest.

Its own servo motor is preparing for production and manufacturing. It would be a great thing if it can enter the European and American markets in one fell swoop, let alone such a powerful CNC machine tool manufacturer.

Demark is an old European machine tool manufacturer with a great reputation and strength in the world. It is one of the top ten machine tool brands in the world.

They are especially famous for their CNC machines, including CNC lathes, turn-mill centers, three-axis machining centers, five-axis machining centers, and more.

They released the news that they were going to purchase a batch of servo motors from the world's leading motor manufacturers, a total of two types, to be used on their mass-produced CNC machine tools. Both Yang Chenglin and Tang Fei knew this was an opportunity.

After listening to Yang Chenglin's report, Tang Fei stood up, showing great interest, "Get ready, try to contact Demark, and give it a try first."

Yang Chenglin said: "I have already understood that Demark established their office in China in Shenhai City. Let's get in touch with them first."

Tang Fei said hopefully: "Okay, I'll wait for your news."

Yang Chenglin only stayed in Qingjiang City for two days. After preparing the relevant things, he went to Shenhai City again. According to Tang Fei's instructions, he contacted the other party and sold his servo motor products.

If the other party agrees to order their own motors, it will be fine, which means that their own servo motors will enter the European and American markets and become the purchase target of world-renowned CNC machine tool companies.

About two or three days later, the news came back.

Yang Chenglin called back from Shenhai City and said in a low tone that this matter is very difficult and there is little hope.

what!
Hearing this situation, Tang Fei was a little anxious. After thinking about it, he decided to take a trip to Shenhai City himself. Apart from seeing what was going on, he also stopped by to see what happened to the piece of land he bought. That's it.

.........

Two updates today, the second update is over!

(End of this chapter)