God-level industrial master

Chapter 261 Staff Arrive
When the visitor saw that Tang Fei had a guest, he gave a sorry look, and immediately retreated, and closed the door gently.

At first glance, it may seem strange.But soon Tang Fei knew who it was, and felt happy for a while, and it was fine to see the other party withdraw, and he didn't say anything.Anyway, everyone has already arrived, so there is no rush.

Of course, Xie Zhenhua didn't know this middle-aged woman. He said, "Mr. Tang, you have a guest here, which has delayed you."

Tang Fei waved his hand and said, "No, no, you just asked when the DJ4 control system of the second car will be trial-produced, right?"

"Yes, yes, this is the matter."

This is what Xie Zhenhua is very concerned about. After the trial production of the control system of the first car, it must not be used for delivery to the Red Star Factory, because the first control system has gone through many tests, including tests in various harsh environments, and the final destruction. sex test.

After so many tests, no matter how good the quality of this control system is, it cannot be installed and used in a car. We have to wait for the second or even the third one.

Such an excellent, such an excellent control system, Xie Zhenhua wants to get it sooner, and install it on his electric locomotive earlier, wishing that Tang Fei and the others will start the production of the second locomotive control system immediately.

Tang Fei thought for a while and said: "Well, it will take about a month. In the next month, we will review the design data, process data, etc. according to the problems exposed during the trial production process of the first car control system. perfect."

"It is estimated that it will take about a month. After all these are perfected, we will start the control of the control system of the second car, and try to use about two months to trial-produce the control system of the second car. In the second half of this year, we will strive to enter the small batch production of the DJ4 control system, and enter the formal mass production next year."

The trial production of the control system of the first car took more than four months, because it was necessary to cross the river by feeling the stones, to accumulate experience, and to rectify problems encountered.

With the trial production experience and foundation of the control system of the first car, the second car will be much faster, and the production cycle of the third car will be shortened. When it enters small-batch production, at that time, the technology will be relatively stable and Mature, the manufacturing cycle of each control system will be greatly shortened.

Xie Zhenhua works in technology and knows all about it.

He just didn't think about it, Tang Fei and the others only need one month, and then they can start the trial production of the control system of the second car. He thought it would take at least two or three months.

He believes that after the trial production of the control system of the first car is completed, there must be many problems that need to be rectified. The design data and process data need to be greatly improved, and it will take at least two to three months.

"Mr. Tang, you only have one month!"

Xie Zhenhua's tone was full of surprise, especially when Tang Fei said that it will enter small batch production in the second half of this year.

In this way, the DJ4 electric locomotive produced in small batches by Hongxing Factory can be equipped with a completely localized control system, because the small batch production of DJ4 electric locomotives produced by Hongxing Factory will also be around the second half of this year.

Talking with Tang Fei, Xie Zhenhua seemed to have taken a reassurance, knowing that Tang Fei still had guests, and he didn't want to waste Tang Fei's time.

He got up and said goodbye: "Mr. Tang, then I'll go back first. I will report to Mr. Chang in detail what I have learned."

Tang Fei got up and sent Xie Zhenhua to the door of the office before returning to his boss chair and sitting down.

Not long after, there was another knock on the door.

The capable middle-aged woman knocked on the door just now and came in, and said respectfully: "Hello boss, Hao Hongxia is reporting to you."

Tang Fei's guess was absolutely correct. This was Hao Hongxia, a technical expert in the field of microelectronics and chips that he had summoned, a researcher at a well-known microelectronics research institute in China.

"Expert Hao, you came so fast. Among the four of you, you are the first to arrive."

Hao Hongxia said: "Boss, I am in China. I will resign immediately and come here by plane. I hope to devote myself to work earlier and develop our first mobile phone chip as soon as possible."

It's a good thing to be motivated.

Tang Fei felt in his heart that he was worthy of being the expert he summoned, with a strong sense of professionalism and loyalty to himself. Whenever he was summoned, he immediately came to report.

After chatting with Hao Hongxia and getting to know her basic situation, Tang Fei called Wang Hailong over and let him make arrangements to temporarily settle down for Hao Hongxia, and then go to Shenhai City together after the other three arrived.

The trial production of the DJ4 control system of the first car was successful, and it didn’t take long for the DJ4 control system designed and developed for Nie Qingshan’s factory to complete the trial production preparations and start trial production.

Because of the technical basis for the successful trial production of the first DJ4 control system for Hongxing Factory, the preparation for the trial production of this DJ4 control system was much smoother and faster.

Hearing that the preparations for the trial production were completed and the trial production was about to start, Nie Qingshang was extremely happy. Although others did not come, they called to express their thanks to Tang Fei.

Nie Qingshan's words were full of gratitude.

Jiuzhou Industrial Co., Ltd. has helped them a lot. After completing the trial production preparation work, the official trial production will be ushered in. Their factory will be able to use the domestically produced electric locomotive control system in the future.

They are also promoting the work of increasing the localization rate, and the goal is to achieve a localization rate of more than 4% for the DJ80 electric locomotive. With the localized electric locomotive control system, they have no problem in achieving this goal.

As Hao Hongxia was the first to report, the other three appeared one after another and reported to Tang Fei one after another. In just a few days, all four of them arrived.

There are a total of three technical experts in the field of chips and one expert in enterprise management, who have rich experience in advanced management of large-scale enterprises.

After everyone arrived, Yang Chenglin and Wang Xingkui also rushed back from Shenhai City.

As soon as the two of them returned to Jiuzhou Industrial Co., Ltd., the first thing they did was to stride into Tang Fei's office and report to Tang Fei.

Tang Fei was very happy to see the two of them back.

"It's all hard work, please sit down, if you want tea, do it yourself."

Yang Chenglin was quite familiar with the situation in Tang Fei's office, he knew the way, and made three cups of hot tea by himself. Tang Fei, himself and Wang Xingkui each had a cup.

After making the tea, he sat down on the sofa again, and first introduced the latest situation of the chip base in Shenhai City to Tang Fei.

After listening to the report, Tang Fei felt very relieved. The first phase of his chip base started construction last year, and in about half a year, it has basically been completed and can basically be put into use.Even the chip design and R&D center with the largest project volume and the largest construction area is about to be completed.

Wang Xingkui also took the initiative to report his work. According to Tang Fei's instructions, he has formed a technical team of more than a hundred people, including several doctoral students, more than a dozen technicians with master's degrees, and the rest with the lowest education. Is a key university, undergraduate students of related majors.

Yes, yes, the technical team has basically been formed.

Wang Xingkui also reported on the selection and procurement of chip manufacturing equipment and related scientific research and testing equipment.

Some equipment is about to arrive, and some have already been shipped abroad and are being shipped at sea.Speaking of these equipment purchases, especially the purchase of imported equipment, there is a little story in the middle.

Chip research and development, production and manufacturing require the use of several relatively high-end imported equipment. Wang Xingkui contacted a foreign manufacturer, and they did not sell it.

After he reported the situation to Tang Fei, Tang Fei took care of it with just one phone call, and Demark Machine Tool Group acted as an intermediary.

There was an agreement at the beginning that Demark Group purchased the IGBT products and servo motor products of Jiuzhou Industry Co., Ltd. When Jiuzhou Industry Co., Ltd. encountered difficulties in importing equipment, Demark Group had the obligation to help.

The Demark Group also did what it said. After receiving Tang Fei's call, their executives immediately took action and contacted the chip equipment manufacturer.

Maybe they are both equipment manufacturers, maybe Demark Group stated the pros and cons, maybe Jiuzhou Industrial Co., Ltd.'s IGBT products and servo motor products played a role.

The chip equipment factory was loose, and then changed its strategy, fully agreeing to sell the equipment to Jiuzhou Industrial Co., Ltd.

In this way, all kinds of equipment needed for the first phase of the project, including scientific research and test equipment, are all done, except for the most critical lithography machine.

This thing is not simple, and it is not easy to buy it. Fortunately, Tang Fei did not ask for the import of photolithography machines at all.

Wang Xingkui also thought that the large photolithography machine in the Qingjiang factory might be used when the chip is produced.

Wang Xingkui said: "Boss, all the equipment is ready and will arrive one after another, and then it can be installed and debugged, but there is a shortage of wafer manufacturing equipment and key lithography machines."

Tang Fei smiled and said relaxedly: "These equipments are already in place, especially the lithography machine. We already have a second large-scale lithography machine with advanced performance."

"That's great." Hearing this, Wang Xingkui was relieved for a while, and then reported some other aspects of his work.

After listening to the work report of the two, Tang Fei said: "I called you back from Shenhai City all the way, do you know what it is?"

The two shook their heads lightly. For the time being, they really don't know what the reason was. Anyway, it was definitely not to listen to their work reports face to face.

If you want to know the situation of the chip base in Shenhai City, Tang Fei can use the phone. Besides, Yang Chenglin will take the initiative to call to report the latest progress of the chip base every now and then. Tang Fei knows the situation of the chip base better.

There was absolutely no need to go to great lengths to call the two of them back from Shenhai City.

The two looked at Tang Fei, waiting for Tang Fei to continue.

.........

Two updates today, the second update is over, thank you for your support!

(End of this chapter)