God-level industrial master

Chapter 373
These days, Tang Fei stays in Shenhai City, but both Jiuzhou Electric and Jiuzhou Subway are doing well.

Needless to say, Jiuzhou Electronics has been on the right track for a long time, and has been growing steadily, with a very large daily shipment volume.Various motors, various IGBT products, and a large number of U disks, as well as spare parts of various electric locomotives, etc.

They are produced continuously, and then transported away by waiting trucks, the situation is very hot.

The development of Jiuzhou Metro is also good. Since the production of various spare parts for the first subway locomotive started, the progress has not been slow.

Some large parts have been welded. As early as a few days ago, many large parts entered the spray shop and started painting.

After returning from Shenhai City, Tang Fei drove to the gate of the Jiuzhou Metro Factory early in the morning on the second day after returning to Qingjiang City.

Driving his own Humvee to the gate of the factory area, it was the time when the employees went to work in the morning. Tang Fei simply stopped outside the factory gate and watched everyone go to work in a good mood.

It can be seen that although Jiuzhou Metro has been established for a short time, there are already a large number of employees. Everyone is wearing work clothes, going to work happily, and preparing to start a day's work.

"Ma's ability is good. Under his management, Jiuzhou Metro has developed very well."

Thinking of this in his heart, he looked at the factory gate with great interest for a long time. After eight o'clock in the morning, almost no employees came in and out of the big factory gate. Tang Fei started the car, drove slowly into the factory area, and parked the car in the factory area in front of the office building.

"Boss, come here!"

Ma Jianwei knew that the boss would come over this morning, so he was waiting early. Seeing that it was already eight o'clock, but the boss hadn't shown up yet, he left the office building and was about to go to the factory gate to greet him, when he happened to see Tang Fei getting off the car.

Tang Fei said: "Old Ma, I haven't been here for a while, the entire Jiuzhou Metro is developing well, when I went to work just now, I saw a large number of employees happily walking in to work, and my mood was unprecedentedly good. "

Ma Jianwei said: "Boss, within this month, we have newly recruited hundreds of front-line production employees, and they have passed the training, and all of them have been employed. They have started the production and manufacture of various spare parts in various jobs."

"At the beginning, I heard that we were going to recruit hundreds of employees. The whole recruitment scene was so hot. Now I can vividly recall it. Many people from nearby counties and cities, and even some people from neighboring provinces, rushed over after hearing the news. If you want to become an ordinary worker of our Jiuzhou Metro, at least thousands of people will participate in the recruitment."

"We selected several hundred of these thousands of people. The ratio is basically ten to one. The quality of the recruited employees is very high. Many of them are mature talents with various skill level certificates, and some are senior technicians. , they have already begun to play a role in their posts..."

As soon as they met, Ma Jianwei was eloquent, talking a lot in one breath.After talking for a while, he probably realized that he had talked too much, so he hurriedly said, "Boss, should you go to the office and sit down now, or go to the production site to have a look."

Tang Fei waved his hand and said, "Of course I'm going to the production site. I want to take a look at the production and manufacturing of our first train."

While leading the way, Ma Jianwei said: "The production and manufacturing of our first subway line has been relatively smooth. Many spare parts have been manufactured, some have been sent to the final assembly plant, and some have been put into storage, waiting for the final final assembly. .At present, only some large parts with a relatively long production cycle are missing."

"These large parts have all entered the spraying workshop, and the paint spraying has already started. Some of them will come out of the spraying workshop this morning and then be sent to the final assembly workshop..."

After listening to Ma Jianwei's introduction, Tang Fei said: "The production is progressing really fast. From the looks of it, our first subway train will officially enter the train, and it should be within a few days."

Ma Jianwei said confidently: "Within three days, our first subway train will officially enter the train, and then the final assembly will begin."

The technical information of the subway comes from the system, which is very complete and scientific.There is no need for design verification at all, and there is no need for process verification during the manufacturing process of spare parts.

In this way, the production and manufacturing cycle is greatly shortened, and everything goes very smoothly.This is almost like a record. For other subway manufacturing companies, such a speed is unimaginable.

Tang Fei was in high spirits, and waved his hand: "Let's go, let's take a look at the production of each spare parts."

Accompanied by Ma Jianwei, the two walked into one of the machining workshops together.Compared with the last time I came here, there are obviously a lot more production workers here. It is very busy, and the workers are processing various parts in an orderly manner.

The entire production site has a huge area. This is a mechanical processing plant with an area of ​​more than 1 square meters. There are many workers, various production equipment, and a large number of raw materials, such as various aluminum profiles, plates, etc., but The whole site is very tidy and clean.

Over the past few years, we have been adhering to lean production and on-site 6S management. These things have penetrated into the bone marrow of the entire enterprise, and they are fully reflected here.

In terms of corporate management level, looking at the entire Jiangnan Province, Jiuzhou Industry must be the number one, even if it is placed in the country, it is also among the best.

Tang Fei looked at it very seriously, and saw a lot of parts processing, not only the processing process, but also the finished parts and components.

The quality of the spare parts was very good, and Tang Fei felt satisfied for a while.This may be related to my quality +2 BUFF, and also related to advanced and scientific management.

After looking around this mechanical processing plant, accompanied by Ma Jianwei, Tang Fei walked into the huge welding plant.

This is a very professional large-scale welding workshop with very high construction standards, covering an area of ​​more than 1 square meters. There are various welding equipment and a large number of welding workers in it, welding various parts.

In the whole workshop, the most conspicuous thing is the two large welding equipments. There are large parts on the welding work platform of each equipment. Multiple manipulators are welding. The arc splashes and the strong light shines, which is pleasing to the eye. .

Ma Jianwei said: "Boss, we have started welding the car body of the second train. This is the first car body, and we started welding this morning."

The speed is really fast!
Even the car body of the second train has begun to enter the welding process. It is estimated that after ten days and a half months, the car body of the second train will be able to enter the spraying workshop for paint spraying.

If it is other subway manufacturing plants, no one has such courage.Before the first train is trial-produced, we must not dare to start the production of the second train easily.

This is Jiuzhou Subway, the technical information comes from the system, and the design will definitely not be easily changed. Even if the design verification is carried out, it must meet the design requirements.

Therefore, in order to shorten the production cycle and implement mass production as soon as possible, Jiuzhou Metro has started the production and manufacturing of the second train, and the progress is not slow. The car body of the second train has begun to enter welding.

After watching the welding situation, Tang Fei entered the spraying workshop.

As soon as I came in, I immediately saw the sections of the car body at the painting booth. Some of them were being sprayed, some had been sprayed with primer, and one section had been sprayed with topcoat, which looked very beautiful.

After the paint dries, the car body can go to the final assembly shop, and then the final assembly begins.Looking at the painted body of this section, Tang Fei secretly admired it, it is so beautiful, much more beautiful than the color pictures on the introduction materials.

"Old horse, your progress is really fast!"

Ma Jianwei said: "As early as a week, the car bodies of our first train began to enter the spraying workshop one after another, and began to spray paint one after another."

"This section of the car body is the front of the car, and it is also the first to be painted. The top coat was sprayed yesterday. After the paint is dry, it is planned to enter the final assembly workshop in three days."

When the car body enters the final assembly workshop, the industry term is called "car entry", which is completely like a milestone in the field of electric locomotive manufacturing.

"Getting off the car" means that you can enter the delivery workshop, just waiting for acceptance and delivery to the customer.

Looking at the spray-painted car body in front of him, Tang Fei thought to himself, the progress is really fast, and in a few days, our first train will be able to enter the car one after another.

After staying in the painting workshop, Tang Fei went to the final assembly workshop.There, he saw that all the preparatory work has been completely done, and all the assembly stations are ready, just waiting to enter the car.

Finally, Tang Fei went to the delivery workshop.

This is the last factory building built. Its area is smaller than that of the assembly workshop and the machining workshops. It is mainly used for acceptance, testing and delivery of the locomotives to be delivered.

A rail runs from the final assembly hall to the delivery hall.At that time, after the subway locomotive gets off the train, it can be pulled into the delivery workshop through the rails.

Everything is ready, just waiting for the final assembly workshop to enter the car!

Three days passed in a flash, and according to the plan, the first subway locomotive entered the train today.

Early in the morning, Tang Fei drove into the Jiuzhou subway, a little earlier than the average staff went to work.After parking the car, I went into my office first, made a cup of tea, raised my hand to check the time, it was still early, and there was still more than an hour before I got into the car at [-]:[-] am.

Standing in front of the window, looking through the glass at the huge assembly plant in the factory area, I thought to myself, the progress is really gratifying, and our first subway locomotive is about to enter the train.

At about [-]:[-] in the morning, Tang Fei planned to go to the assembly workshop in a few minutes. At this time, he received a call from Xie Zhenhua from Red Star Factory.

……

Today is the third update, the third update is over, thank you for your support!

(End of this chapter)