God-level industrial master

Chapter 49 Summoning Again
Today, Tang Fei came a little later than usual.

Last night everyone was so enthusiastic, they toasted Tang Fei one after another. As a result, Tang Fei got drunk and fell asleep as soon as he got home. He didn't wake up until after [-] o'clock in the morning.

Thinking about the scene yesterday, Tang Fei couldn't help but shook his head with a smile. These workers are really cute, and they seem to have completely supported his boss.

When he walked into the factory, Tang Fei saw that it was exactly as usual, the entire production site was orderly, busy but not chaotic, and everyone was already working at work.

Manufacturing of inner panels, stamping of terminals, etc.I also saw the figures of Wang Hailong and Liu Jiang, and I couldn't help nodding in satisfaction.

In terms of daily management, with the assistance of these two people, especially Wang Hailong, Tang Fei felt much more relaxed. He no longer had to worry about many specific matters by himself. Wang Hailong would handle them properly. Only some more important matters would be reported by Wang Hailong. To Tang Fei.

Yesterday, I received an order of more than 100 million from Red Star Factory. Starting today, my focus will gradually shift from the interior board to the terminal block.

After all, the interior panels have certain limitations, which are limited to the needs of the Red Star Factory, and the connectors are different. In addition to the Red Star Factory, it can also be expanded to other fields.

Of course, the interior boards will not be lost, at least 10,000+ per month, or even 10,000+ per month, plus the connectors, my monthly output value will gradually increase.

After walking around the production site, seeing that everything was normal and that he hardly needed to worry about it, Tang Fei went back to his office in peace.

He closed the door gently, took out the two processing contracts, and looked through them happily.There are a total of more than [-] types of connectors. If it is from other suppliers, they will need to make more than [-] sets of stamping dies, while Tang Fei only needs to design some modules.

"Oh, yes, it should be possible to summon again."

Turning on the "God-level Industrial Owner" system, Tang Fei saw that the system's tasks were indeed displayed as completed, and the number of gold coins had changed from 100 to 400.

The task was completed, and 300 gold coins were rewarded.

It only costs 200 gold coins to summon once, and the first-level "God-level Industrial Owner" system has two summon places, which are displayed as "1/2" in the summon column.

Call, I will call again.Tang Fei thought in his heart, this time he hopes to summon a technical talent to share some of his technical work, at least he doesn't have to draw strokes by himself.

After having a technical talent, I only need to do a little bit about some technical matters, some new designs, some new ideas, I just need to mention a little bit, and the specific things should be handled by this technical talent. rather than myself.

Just do what he said, Tang Fei clicked the "Summon" button with hope, and started his second summon.

A golden light flashed across the entire system interface, and several golden characters "summoning completed" appeared, and then gradually disappeared, and a new message appeared in the summoning bar.

Zhao Ke, male, 33 years old, graduated from the Mechanical Department of Huaqing University, senior engineer...

There are not many written introductions, just a few lines. What makes Tang Fei happy is that he is indeed a technical talent, and he is a senior engineer at the age of 33, which is really awesome.

As for the fact that after the summoning, there was no golden light flashing around him, and a big living person appeared out of thin air, Tang Fei was no longer surprised.

Maybe one or two days, maybe a few days, Zhao Ke will come to his side.Graduated from a famous school, major in mechanical engineering, senior engineer.Such a person became his subordinate, and he would be much more relaxed in the future.

For example, the stamping modules that need to be designed for these twenty kinds of terminals, as long as I talk about the idea, Zhao Ke can definitely draw the design drawings, and then Liu Jiang can process them, and then the terminal can be stamped and manufactured. These types of connectors.

The provincial capital, a large state-owned factory.

Today, there was one thing that many people in the factory were talking about. Zhao Ke resigned. I heard that he has packed up his personal belongings and left the office.

Where Zhao Ke went, no one knows.

As for Zhao Ke, he is a star figure in this factory. Not only was he awarded a senior title at a young age, but the key is that he really has two brushes in technology.

The factory leaders are collectively optimistic about Zhao Ke, and the chief engineer of the factory intends to train him. He wants to train Zhao Ke into a technical backbone and become the middle force in the factory's technology. After this year, Zhao Ke may be promoted and entrusted with important tasks. .

Zhao Ke resigned and left.

Where did he go?

.......
"Crack, clap, clap..."

The punching machine is punching rhythmically, and the terminals are punched and formed one by one at a time. They are neatly placed in the wooden box next to them, and the number gradually increases.

This is one of the types of connectors among the millions of orders. The batch is relatively large. The quantity of this type on the order is [-].

Tang Fei couldn't just wait for Zhao Ke to appear. He personally drew the design sketch of this type of terminal stamping module, and instructed Liu Jiang to make the stamping module of this type of terminal.

Put it on and try it out, and it was exactly right. I tried stamping a few times, and there was no problem at all. Therefore, the worker Xiao Liu began to stamp this type of terminal in large quantities.

one, two, three...

The number gradually increased, and Tang Fei kept watching from the side. Seeing these terminals being punched out, he was in a good mood.

Jokingly praised: "Xiao Liu, you are getting more and more proficient, and you can stamp a terminal in almost two or three seconds."

Xiao Liu said modestly: "I'm not proficient enough. I often can't keep up with every punching movement of the punching machine, and I need to have a bye."

This is true.

We know that the punching machine is very rhythmic, reciprocating up and down at a certain frequency, and the time of each punching action is fixed. The worker must put the blank of the terminal into the punching die before punching it down. With a click, the punching is completed. , The worker needs to quickly take out the stamped terminal, and then put another blank into the stamping die before the next stamping action, with a click, and stamp another terminal, and so on, and so on.

This requires stamping workers to be agile and very skilled.

A skilled punching worker only makes the punch press idle about half of the times, while Xiao Liu does about two-thirds.

But for a worker who has only operated a punching machine for a few days, it is already very good.

Tang Fei praised: "Yes, you will gradually become more proficient, and the number of terminals punched out per minute will increase, and strive to achieve more than 20 per minute."

This punching machine punches about dozens of times per minute. If it can keep up with each movement, it can theoretically punch out dozens of terminals, but no one has such a fast hand speed. A skilled punching worker 1 Punching out 1+ lugs in a minute is pretty good.

Xiao Liu nodded and said, "Boss, I will strive to stamp more than 20 terminals per minute."

"En." Tang Fei thought to himself, in a few days, when I have a little time, I will upgrade the set of stamping dies.

This set of molds can be upgraded. Before being reborn, Tang Fei was amazed when he saw this set of ingeniously designed molds. He studied it deeply for a long time.

Last time, due to time constraints, the whole set of molds was simplified by Tang Fei. The manual mode was adopted, requiring workers to manually feed the blanks of the connectors. After the stamping was completed, the stamped connectors had to be manually taken out.

This is very inefficient. A very skilled worker can only punch about 1 terminals in one minute. If the stamping die is upgraded and some new parts are added, it will no longer be so simple, and it will be much more advanced. It can automatically give material, automatically pop out the stamped terminal.

However, the current mold has not been upgraded yet, so I can only watch Xiao Liu stamp out the terminals one by one for the time being. Before there is no automatic stamping mold, there is no rush.

afternoon.

When everyone was about to get off work, someone found a strange man, about 30 years old, looking into the factory building at the gate of the factory.

Liu Jiang was the first to walk over and asked, "Comrade, who are you looking for?"

The man asked, "Is this the Jiuzhou Motorcycle Parts Factory?"

.........

Let me tell you a good news, our "God-level Industrial Owner" has ranked 5th, which is not far behind the previous 4th place. Please help our "God-level Industrial Owner" and vote for those who have recommended votes A few recommendation tickets, if you haven't added them to your favorites, hurry up and add them to your favorites, everyone will work together to make the ranking of this book move up one place!
(End of this chapter)