God-level industrial master

Chapter 547 Jiuzhou Heavy Industry's Processing Strength

Seeing Tang Fei's negation, Zhang Ping seemed to have expected this, he lowered his head and sighed.

When he came to Jiuzhou Industrial Group, he made various assumptions and prepared for the worst, that is, Jiuzhou Industrial Group did not agree to lower the requirements for machining accuracy.

In fact, he also knows this.Reducing machining accuracy will inevitably affect the overall performance of the UAV engine, and may also affect the quality of the engine.

Seeing that Tang Fei denied this, Zhang Ping didn't insist, and didn't try to persuade Tang Fei, but lowered his head and sighed softly.This domestic aero-engine factory is facing such a problem. They do not have a high-precision advanced five-axis machining center, so it may be difficult to overcome the technical problem of machining accuracy.

Tang Fei noticed Zhang Ping's expression, couldn't help smiling happily, and took a sip of tea.

Seeing that Tang Fei actually laughed, Zhang Ping raised his head and looked at Tang Fei, his eyes were very puzzled, and he couldn't understand why Tang Fei smiled so easily.

Tang Fei quickly gave the answer.

"Director Zhang, I don't agree with lowering the machining accuracy of engine parts. That's because our Jiuzhou Heavy Industry has such processing capabilities. There are two advanced high-precision five-axis linkage CNC machining centers in Jiuzhou Heavy Industry's precision machining center. .”

what!
Zhang Ping's reaction was great. He stood up abruptly, looked at Tang Fei with disbelief, and said in surprise, "I...I heard it right, Jiuzhou Heavy Industry has such advanced processing equipment."

Tang Fei said affirmatively: "Yes, not only there are, but there are two. The larger one can process workpieces with a maximum diameter of 1500mm, and the smaller one can also process workpieces with a diameter of 800mm."

"This is really good!"

Receiving an affirmative answer from Tang Fei, Zhang Ping was overjoyed, clenched his fists hard, and blurted out the words "that's great" with a slightly higher tone.

In addition to being overjoyed, he also sat down and said happily: "Mr. Tang, this means that the problem of machining accuracy we are facing is no longer a problem."

Tang Fei said: "Yes, this domestic aero-engine company can put the finishing process of some parts in Jiuzhou Heavy Industry, and Jiuzhou Heavy Industry will help them complete this process."

In other words, this enterprise can complete the pre-processing of parts, including rough machining and semi-finishing.After the parts are semi-finished, they are sent to Jiuzhou Heavy Industries, which completes the high-precision machining of the parts.

This is perfectly fine.

Jiuzhou Heavy Industry not only has two high-precision CNC five-axis machining centers, but also has strong processing capabilities.The time from its establishment to the present is not too short, and it has accumulated a relatively solid processing foundation.

Next, Zhang Ping and Tang Fei talked about some specific matters of parts finishing.

After about an hour, the matter was settled like this and the problem was solved.

At noon, Tang Fei treated his guests to dinner and had lunch at the hotel in the International Finance Building.After Tang Fei held his wedding here, the hotel officially opened to the public. It has been open for almost two months now, and the business has been booming.

It should be stained with the light of the International Finance Building.This skyscraper is a landmark building in Shenhai City, and it is currently among the top three tallest buildings in China.

In such a building, there is a super five-star hotel, and publicity and advertising are unnecessary. It has also become famous along with the International Finance Building. Almost everyone in Shenhai City knows that the International Finance Building is the No. 51 hotel. The 86st floor to the 50th floor are top-level office buildings.The [-]th floor and below, mainly this [-]-star hotel, already sprawling shopping mall.

After lunch, Zhang Ping didn't even have to take a break at noon. He just sat down to drink tea and chat with Tang Fei after the meal. It was supposed to be a break at noon. Then, he proposed that he wanted to visit Jiuzhou Heavy Industry.

He wanted to see those two high-precision five-axis machining centers.

Tang Fei readily agreed, so everyone left the International Finance Building, went to Jiuzhou Heavy Industry, and arrived at Jiuzhou Heavy Industry at around two o'clock in the afternoon.

After receiving the notice that the boss and Director Zhang Ping of the military were coming, Zhu Yifeng was already waiting there to greet him. Seeing Tang Fei and Zhang Ping getting off the car, he walked over quickly.

"Hello boss, hello Director Zhang, welcome to Jiuzhou Heavy Industries."

Tang Fei nodded.

Zhang Ping was quite surprised and said: "Mr. Zhu, the scale of your factory area is not small. It is worthy of making heavy equipment. The height of each factory building is higher than ordinary factories."

This is a characteristic of heavy equipment manufacturing plants, which are also higher than ordinary plants, because heavy equipment is bulky and the corresponding parts are relatively large in size.

For example, in the large-scale shield machines currently manufactured, the diameter of a cutter head can be as small as 6 meters, and as large as 9 meters, or even 12 meters, which requires a factory building with a relatively high floor height.

Zhu Yifeng smiled proudly, and asked for instructions: "Boss, should we sit down first, or go to the production site now?"

Tang Fei smiled and said, "Our Director Zhang came here to see the two high-precision five-axis machining centers. Let's go directly to the precision machining center."

"Ok."

Zhu Yifeng accompanied Tang Fei and Zhang Ping, and behind them was Xu Guangming and the guards brought by Zhang Ping.Everyone walked along the spacious and straight avenue in the factory area towards the precision machining center workshop.

On the way, Zhang Ping almost gave the thumbs up again. He has been to the Jiuzhou Industrial Group's factory area many times, and every factory area is so clean and tidy, it is completely a garden-like factory.

The area of ​​the factory area is also relatively large. It takes several minutes for everyone to walk to the precision machinery processing factory building. This is a large factory building with an area of ​​several thousand square meters. wet.

Basically stable temperature and humidity, which is the basic guarantee for high-precision machining, because metal materials will expand and contract with heat, too cold in winter and too hot in summer will affect the machining accuracy of parts.

Walking into this factory building, Zhang Ping felt very comfortable, because the temperature in the factory building was controlled at about 20 degrees, and the humidity was also in a very reasonable range, neither humid nor dry.

The factory building is clean and tidy, the ground is so clean that people can be seen, and the parts and machine tools in the factory are neatly placed, reflecting a high level of on-site management.

Zhang Ping thought in his heart that the management level of Jiuzhou Industrial Group is high, which can be seen from the clean and tidy production site.

It didn't take long for everyone to walk to the two precision five-axis machining centers. They were processing parts. Next to each machine tool, there were neatly placed some parts waiting to be processed, and there were also some processed parts. There are also parts being processed on the machine tool.

This is the precision five-axis!
Zhang Ping recognized it at a glance, and accelerated his pace invisibly. He walked in front of one of the five-axis machines and watched it process parts with great interest.

Whether it is a large shield machine, a large bridge erecting machine, or even a large mine car that is currently being trial-produced, their high-precision parts are processed in this factory building, and some of these complex precision parts are often produced in these two places. processing on a machine tool.

Jiuzhou Heavy Industry has several mechanical processing plants, each of which has a relatively large area.The precision machining center workshop is just one of them, mainly responsible for the machining of parts with high precision.

Zhang Ping stood next to one of the precision five-axis machines and looked at it seriously. He is a military technical cadre, and he didn't understand anything. After looking at it for a while, he saw the way.

That's right, this is definitely a high-precision five-axis, and it looks very advanced.

After looking at the processing of the parts for a while, he looked at the processing drawings of the parts again, saw the high-precision dimensions on it, and nodded slightly.

With such processing accuracy, there should be no problem in processing high-precision parts for drone engines, and those parts will definitely be processed smoothly.

Zhang Ping was very happy, and held Tang Fei's hand tightly, "Mr. Tang, with these two high-precision CNC five-axis, I am completely relieved."

Tang Fei said confidently: "Director Zhang, don't worry, the finishing machining of some parts of the engine can be done in Jiuzhou Nakano Group."

"Good, good." Zhang Ping said two "good" words again and again.

After looking here for at least half an hour, Zhang Ping was very interested and asked to visit the entire Jiuzhou Heavy Factory area.

Tang Fei readily agreed and took him to visit Jiuzhou Heavy Industry in person.Not only did I visit several processing plants.In these processing workshops, Zhang Ping took a closer look, and at the same time knew that Jiuzhou Heavy Tools had a strong processing capability.

He also went to the huge assembly center workshop, where he saw not only several large shield machines in the final assembly, but also several large bridge erecting machines being assembled.

In front of one of the large shield machines, Zhang Ping said: "Mr. Tang, this is a powerful tool for digging mountains and holes. If our military has underground projects to be constructed, I think we can order a few from here."

Hearing this, Tang Fei was overjoyed.

Unexpectedly, the military is also a potential customer. Maybe one day, they will also order large-scale shield machines from Jiuzhou Heavy Industries for the construction of their underground projects.

Zhang Ping didn't leave the Jiuzhou Heavy Factory Area until after five o'clock in the afternoon. After a day passed, he had gained a lot.

The problems of the single crystal high-temperature alloy and the machining accuracy of the engine parts all had to be solved, and he happily started preparing to return to the capital.

Originally, he wanted to go to Guancheng City to see the construction of the drone factory area, but all the problems have been solved. He wanted to go back to the capital first, report to Minister Tang first, and then go to Guancheng City next time he is free.

He didn't even eat dinner. He took the evening plane, left Shenhai City, returned to the capital, and brought back the good news to Minister Tang.

Far away in the capital, Tang Guoqiang was still waiting for news from Zhang Ping.

……

Today is the third update, and the second update will be delivered!

(End of this chapter)