God-level industrial master

Chapter 550 Completely relieved

Reception Room No. [-] is not far from Tang Fei's office.

In the reception room, Yu Shaoguang, Yi Chunhua and a group of five people were already there, drinking tea while waiting for Tang Fei to come.From the expressions on their faces, it can be seen that their hearts should be full of shock.

From the moment they walked into the International Finance Building, the shock in their hearts slowly rose. Everything they saw shocked them deeply.

Unexpectedly, the International Finance Building is so majestic and the interior decoration is so high-grade. After arriving at the headquarters of Jiuzhou Industrial Group, I was extremely surprised that the office environment of Jiuzhou Industrial Group is so good.

Just like the No. [-] reception room, it is not only large in size, but also has an invisible sense of luxury, and the environment is not generally good.Yu Shaoguang took a deep breath, tried to calm his mind, and tried his best to let the shock in his heart recede.

Soon, he heard footsteps coming from outside the door, he sat up straight quickly, and gave the others a look. Everyone knew that Mr. Tang should have come over.

Tang Fei and Wang Hailong walked into the reception room one after the other, and Tang Fei said heartily, "Everyone, welcome to Jiuzhou Industrial Group."

Yu Shaoguang got up quickly and said, "Hello Mr. Tang, I'm Yu Shaoguang from Factory 336, this is our chief engineer Yi Chunhua, and this is our technical director..."

He introduced his people to Tang Fei one by one, and the people from Factory 336 took the initiative to shake hands with Tang Fei one by one.Tang Fei also introduced Wang Hailong to everyone.

After exchanging polite greetings, everyone sat down on the sofa.

First, we chatted casually, and then gradually got to the point. We talked about the trial production of drones, and then we talked about the trial production of drone engines, and we also talked about the issue of machining accuracy.

Yu Shaoguang said: "Mr. Tang, to be honest, we have two main purposes for coming here this time. One is to seek help from you, because we have encountered problems with processing accuracy in the processing of some key important parts, and the other is to Thank you for coming to the door, thank you for your help in engine technology."

Tang Fei smiled, "Mr. Yu, it's too serious. We just gave the whole set of technical information for the drone's engine, so thank you is unnecessary."

"Yes, yes." Yu Shaoguang said while waving his hand, and one of his entourage understood, immediately opened the briefcase and took out a gift from it.

This is an exquisite aircraft model, and it is a model of a domestic fighter plane. It is very beautiful. It is not the kind of model that can be bought in the general market. This is a limited edition commemorative model of a fighter plane in the domestic aviation industry system.

Yu Shaoguang said: "Mr. Tang, this is a model of one of our main domestic fighters. I hope you like it."

Tang Fei took it, looked at it for a while, and said with satisfaction: "It's so delicate, I accept this gift, thank you, Mr. Yu, for your kindness."

Yu Shaoguang hurriedly said, "President Tang, you are welcome."

This airplane model represents their gratitude. Of course, the gratitude is more than that. Factory 336 will always keep its gratitude to Jiuzhou Industrial Group and Tang Fei in its heart. This kind of affection will be expressed in many places in the future. things up.

For many years to come, the two parties have been developing good cooperation, and this cooperation has continued, gradually forming the tradition of 336 factories.

In future cooperation, if someone from Jiuzhou Industrial Group goes on a business trip to Factory 336, it will be treated with a high standard, and Factory 336 is very enthusiastic.

Seeing that Tang Fei accepted the gift and seemed to like it very much, Yu Shaoguang felt relieved and happy, and began to chat with Tang Fei about the progress of their current trial production of the engine, and also talked about some problems they encountered.

From Yu Shaoguang, Tang Fei knew that apart from the problem of processing accuracy of the drone's engine and the overseas procurement of some raw materials, the overall progress was not bad. At least Tang Fei felt quite satisfied.

Trial production of many parts has already started. Factory 336 attaches great importance to the trial production of some important and key parts. Even if imported materials are needed, they will replace them with alternative materials before the materials are in place. They are already conducting trial processing to accumulate processing experience.

After introducing his trial production situation, Yu Shaoguang also said: "To be honest, some parts require high precision, and we have encountered a big problem."

Tang Fei nodded, "Mr. Yu, tell me specifically which parts are facing processing accuracy problems and what kind of high-precision processing equipment is needed."

As the chief engineer and chief model engineer of the UAV engine, Yi Chunhua introduced the problems they encountered to Tang Fei.They were relatively well prepared and had a list of parts.

There are a total of more than ten parts with drawing numbers. The finishing machining cannot meet the design requirements for the time being, and high-precision CNC five-axis is required.

Tang Fei took the list and looked at it roughly. Such parts basically involve the processing of complex shapes, and the processing accuracy is very high. If there is no high-precision CNC five-axis, it is really hard for a clever woman to cook without rice. .

After reading the list, Tang Fei said confidently: "Mr. Yu, Mr. Yi, our Jiuzhou Heavy Industry happens to have high-precision processing equipment, and the finishing of these parts can be processed by Jiuzhou Heavy Industry."

Hearing this, Yu Shaoguang and Yi Chunhua exchanged glances quietly, and they both saw the joy in each other's eyes.

The next question is simple, and the two sides began to discuss some specific matters in detail.Mainly, Factory 336 completes the pre-processing of these parts, from rough machining to semi-finishing. When the parts need to be finished, Factory 336 sends the parts to Jiuzhou Heavy Industries.

The finishing of these parts is carried out by Jiuzhou Heavy Industries. After finishing the finishing, the 336 factory will ship the processed parts back.The problem is basically solved like this.

Yu Shaoguang and Yi Chunhua were completely relieved. The big problem that troubled them was finally completely solved by Jiuzhou Industrial Group, so there is no need to worry anymore.

It was already 12 o'clock in the noon, Yu Shaoguang insisted on treating the guests to dinner, and said that he would like to thank Jiuzhou Industrial Group. The hospitality is hard to come by, and Tang Fei did not refuse.

Our group ate at this super five-star hotel in the International Finance Building and had a sumptuous lunch.Although the grade is a bit high and the cost is not small, Yu Shaoguang is happy.

After the meal, Yu Shaoguang asked if he could go to Jiuzhou Heavy Industry in the afternoon to have a look at the processing equipment and the processing environment of Jiuzhou Heavy Industry.

This is of course possible, Tang Fei agreed, and personally took them to Jiuzhou Heavy Industry.

After a short rest after dinner, at about two o'clock in the afternoon, a total of three high-end commercial vehicles left the International Finance Building and headed for Jiuzhou Heavy Industry.

The distance is not too far, about three or four 10 minutes away, the car will arrive at the Jiuzhou Heavy Factory Area.When Tang Fei got out of the car, Zhu Yifeng who got the news had already arrived.

"Hello, boss."

Tang Fei nodded, and then said loudly: "Mr. Yu, Mr. Yi, let me introduce you. This is Mr. Zhu Yifeng, the general manager of our Jiuzhou Heavy Industry."

Everyone introduced each other, shook hands warmly and politely, and then, led by Zhu Yifeng, went to the processing site, first to the precision parts processing center of Jiuzhou Heavy Industry.

This is a large factory building with high construction standards. It maintains constant temperature and humidity throughout the year. The ground is so clean that people can be seen. It is not as messy and oily as ordinary mechanical processing factories.

Here, the ground is clean and the processing site is neat and tidy, which reflects a high level of on-site management. Yu Shaoguang, Yi Chunhua and others couldn't believe their eyes.

At the same time, they are completely relieved that they have such a good processing environment, and they will definitely not have any problems if they place their parts here for finishing.

Even though they haven't seen the two high-precision CNC five-axis, they are completely relieved.

When everyone walked into the huge production site, Yu Shaoguang, Yi Chunhua and others not only saw the neat production site, but also saw a lot of advanced processing equipment.

The CNC processing equipment here accounts for at least 70.00%, which is a very high proportion, and also represents Jiuzhou Heavy Industry's strong processing capacity and high level of mechanical processing.

For example, in Factory 336, their numerical control rate is only about [-]%, which is far from Jiuzhou Heavy Industry.In addition to seeing a large number of advanced CNC machine tools, we also saw a lot of parts being processed.

These parts vary in size, and some of them are particularly large. They have a common feature, that is, they are processed very beautifully and delicately, exactly like pieces of art.

As a technical expert and the chief engineer of Factory 336, Yi Chunhua expressed admiration and thought to himself, there are probably not many manufacturing companies like Jiuzhou Heavy Industry in the whole country, and they have completely reached the level of Western developed countries. At the national level, such manufacturing sites can only be seen in famous manufacturing companies in developed countries.

Our group finally arrived in front of these two CNC five-axis machines.

Seeing these two CNC five-axis machines, whether it was Yu Shaoguang or Yi Chunhua, their eyes lit up, and they immediately began to visit with great interest.

Not only did they look at the parts they were processing, but also some parts that were neatly placed next to them waiting to be processed, as well as the processing drawings of these parts, it can be seen that the processing accuracy of these parts is very high.

This is a very advanced precision CNC five-axis without a doubt!
Yi Chunhua showed affirmative eyes, and said to Yu Shaoguang next to him: "Mr. Yu, this kind of CNC five-axis can process our parts without any problem in precision."

"Well, I'm completely relieved in this way, the obstacles we faced have been completely resolved." Yu Chunhua said.

He also noticed that these two CNC five-axis machines did not have any logos about the manufacturer, and he thought to himself, maybe Jiuzhou Heavy Industry brought back such two CNC five-axis machines from overseas through some special channels. For some unnecessary troubles, the manufacturer information has been removed.

In fact, these two pieces of equipment were exchanged by Tang Fei from the "God-level Industrial Owner" system.

Everyone watched here for a long time, then Tang Fei waved his hand and said, "Mr. Yu, Mr. Yi, I will take you to see a good thing. Let's go."

"Oh."

Yu Shaoguang and Yi Chunhua looked at each other, and they both saw the curiosity in each other's eyes, and hurriedly followed Tang Fei, and walked out of the precision parts processing factory together.

……

Today is the third update, and the second update will be delivered!

(End of this chapter)