God-level industrial master

Chapter 625 The drone factory area that has begun to take shape
Tang Fei was in front, and Xu Guangming followed. The two left the office one after the other, exited the headquarters of Jiuzhou Industrial Group, entered the elevator, and went straight down to the lobby on the first floor of the International Finance Building.

Outside the lobby, a Mercedes SUV is ready.

Driven by Xu Guangming, Tang Fei is going to the drone manufacturing factory in Guancheng City today to see the progress of the factory's construction.

From Liang Xiaofeng's report, Tang Fei knew that the construction of the drone factory area was progressing well, but he hadn't visited it for a while, and today was an unusual day. The aircraft assembly plant in the drone manufacturing factory area today The roof has been successfully capped, and the installation of internal hydropower and related facilities will soon begin.

The off-road vehicle left the International Finance Building, and Xu Guangming drove fast and smoothly.

It took less than two hours from the International Finance Building to the factory in Guancheng City, and Xu Guangming arrived at the factory in only about an hour and a half.

Sitting in the car, Tang Fei could already see a large modern factory area in front of him through the window glass, and he could see the huge factory buildings in this large factory area.

A year ago, this was just a piece of industrial land that had just finished leveling the land. The Guancheng government originally planned to build a large-scale industrial park to attract foreign investment.

This piece of land was taken by Jiuzhou Industrial Group in one go, not only to build a drone manufacturing plant, but also to build a supporting airport.

Looking through the car window, the factory area is already decent and has begun to take shape.

While driving, Xu Guangming reminded softly, "Boss, we will be arriving soon. It seems that Mr. Liang and the others are welcoming us at the gate."

Tang Fei also saw the imposing factory gate of the Jiuzhou UAV factory area. There were several people standing at the gate, which should be Liang Xiaofeng and the others.

Knowing that the boss is coming, they probably greeted him at the gate of the factory early.

The off-road vehicle arrived at the gate of the factory area and stopped in front of Liang Xiaofeng and others. Tang Fei got out of the car and saw Liang Xiaofeng and others standing at the gate to welcome them.

"boss!"

"Boss, hello!"

Everyone greeted Tang Fei proactively.Tang Fei smiled, "Everyone has worked hard and you have been waiting for a long time. Let's go, let's go into the factory area and take a look."

The entire factory area has begun to take shape, and the gate of the factory is magnificent and beautiful. There are soldiers with live ammunition standing guard at the gate, and the security team of Jiuzhou UAV Company is patrolling inside the factory area.

High-definition cameras have been installed in many places in the factory area, and they are closely monitored 24 hours a day. It is an exaggeration to say that even a bird flying in will be known.

The security here is very strict.

Accompanied by Liang Xiaofeng and others, Tang Fei walked into this large factory area. It felt different from the last time he came here. It seemed to be much more beautiful here, and everything looked good.

The factory avenue in the factory area is straight and spacious, and the turf has been laid and a lot of flowers and trees have been planted, and everything has begun to take shape.

Accompanied by Tang Fei, Liang Xiaofeng introduced to Tang Fei as he walked: "Boss, there are many factories in our factory area that have basically completed construction and have entered the installation stage of water, electricity and wind, and the fastest-growing factory has entered the installation of equipment." stage……"

Tang Fei listened with satisfaction, waved his hand and said, "Let's go to the factory building where the construction is progressing the fastest first."

"Okay, boss."

Liang Xiaofeng agreed, and led Tang Fei towards the factory building.This is a large factory building with a construction area of ​​more than [-] square meters, which is a professional aircraft parts manufacturing factory.

Many parts of drones will be manufactured here. Walking into this factory building, Tang Fei found that the factory building is spacious and bright, and the ground is clean, and people can almost be seen.

Some workers in overalls can be seen busy installing some professional equipment.Maybe after a while, a lot of production equipment will be installed, and this plant will be able to start processing some parts of drones.

The parts and components of the first drone are almost manufactured. Except for the parts of the airframe and the engine of the drone, other parts are produced and manufactured by various subsidiaries of Jiuzhou Industrial Group.

The parts of the second drone are manufactured in this factory area. In two or three months, the construction of this factory area will be completed and many parts can be manufactured.

The largest amount of construction work should be regarded as the aircraft assembly plant.

This is designed for the production of large-scale aircraft. In the future, even if Jiuzhou UAV Company produces and manufactures larger aircraft, this factory building will also be able to do it.

It has the largest amount of work, and its construction progress is slightly slower.Many factories in this factory area have been roofed out long ago, and they have entered the stage of water and electricity installation inside the factory buildings. There is even a factory building that has started the installation of machinery and equipment, and this aircraft assembly factory has just completed its roofing today.

But it's finally capped.

This is a gratifying event, and it is also a gratifying event for Jiuzhou UAV Company. Tang Fei came here in person today.

Accompanied by Liang Xiaofeng, he first looked at the first plant where equipment was installed, and then Tang Fei looked at the other two or three plants where water and electricity were installed.

Tang Fei was very satisfied with the progress of the entire construction.

After looking at these factory buildings, he unknowingly walked in front of a huge factory building.This is definitely one of the largest factories in China. In the world, such a construction scale should not be too bad.

It is also the largest plant of Jiuzhou Industrial Group, much larger than the vehicle assembly plant of Jiufang EMU Company.

Not only is the area large, but the height is also relatively high.

This factory building has only one floor, but the height of this floor is not low, reaching a height of more than [-] meters, which is equivalent to the height of more than ten floors of an ordinary residential building.

Such a high floor is naturally prepared for the production of large aircraft. The current drone is definitely not the largest drone of Jiuzhou UAV Company. In the future, the design will be larger and more advanced. of drones.

Tang Fei walked into the factory building.

Tang Fei applauded secretly in his heart, it's really spectacular and big!
The factory building has just finished capping, and the inside is empty. It is because of the emptiness that it looks very, very huge. Tang Fei looked at it and estimated that if he walked, it would take several minutes to walk from one end of the factory building to the other.

Liang Xiaofeng proudly said: "Boss, our large factory building is probably not much smaller than the aircraft assembly factories of Boeing or Airbus."

Tang Fei nodded, and said with satisfaction: "The good news is that it has finally completed the roof capping and is about to enter the installation of the internal facilities of the factory building. In a few months, our factory building will be basically completed."

Liang Xiaofeng said: "We have been looking forward to that day for a long time. We are looking forward to the day when the factory will start the final assembly of the first drone."

"That day won't be too long." Tang Fei said, "I personally went to the aircraft factory in the northwest, and personally saw the body parts of our first drone. They have basically completed the manufacturing."

This is good news, and Liang Xiaofeng and others were obviously happy.

"Boss, even the body parts have been basically manufactured. It seems that we need to speed up the progress and strive to start construction of this factory area by the end of this year."

Liang Xiaofeng and the others had this confidence, Tang Fei was of course happy, and encouraged him: "Then everyone will work harder and start working before the end of this year to enter the final assembly of our first drone."

Tang Fei looked at the drone manufacturing plant, had lunch at the newly built canteen in the plant area, and in the afternoon, accompanied by Liang Xiaofeng and others, went to the nearby airport.

This is the supporting airport of the UAV factory area, and there is only a barbed wire fence a few meters high from the factory area. You can see the airport under construction through this barbed wire fence in the factory area.

After the UAV is assembled in the aircraft assembly plant, it can be easily towed to the airport. It can run from the airport to take off, and fly into the blue sky here.

The construction of the airport is in full swing.

When Tang Fei came here, he saw that the airport apron had basically been built and the cement laying had been completed.There are two runways in the airport. The wide and long runways are suitable for large aircraft to take off and land.

One of the runways is about halfway concrete poured, and concrete pouring will begin on the other runway.

In addition to the apron and runway, the largest building at the airport is the control center for the take-off and landing of drones. This building has been capped and the decoration of the exterior wall has begun.

After the building is completed, the control equipment of the drone will be placed inside it, very advanced control equipment, control equipment designed and developed by the "God-level industrial master" system.

Here you can control the drone to take off, and you can control the drone to fly thousands of miles away.

Tang Fei stayed in the factory in Guancheng City all day, and had dinner with Liang Xiaofeng and others in the evening. There were three tables in total, and all the middle and high-level personnel of Jiuzhou UAV Company participated.

After dinner, Xu Guangming drove back to Tang Fei's big villa in Shenhai City.

……

Tang Fei read a few documents in his office, and habitually tore off a page of the calendar. He was shocked to find that it was already September 9th, and the National Day would be in a few days.

The days fly by.

Tang Fei thought to himself, during this period of time, Jiuzhou Industrial Group has developed in a low-key and fast manner, and all the subsidiaries below have developed well.

Jiufang EMU Company has even completed the manufacture of the eighth JF8A EMU. The order for 200 EMUs has successfully delivered 32 trains. All 5 trains have been put into the passenger operation of the Beijing-Changjiang Line.

Tang Fei thought in his heart that the Jiufang EMU company has finally developed gradually. Starting from October, it should be no problem to produce 10 or 3 EMUs per month.

While thinking about this, Tang Fei's cell phone rang.

As soon as the phone was connected, Chen Guihong's joyful voice came from inside, "Brother, I have already arrived at the gate of the International Finance Building, and I will come up right away."

Tang Fei smiled heartily, "Brother Chen, no need, you wait for me in the lobby on the first floor, I'll come down right away."

For Chen Guihong, today is a big day!

.......
I came back very late today, the update is a bit late, everyone forgive me.

(End of this chapter)