God-level industrial master

Chapter 635 Passed
This exquisite and beautiful engine is lying quietly on the test bench. Several workers are doing the final inspection, and all the lines and pipelines of the engine have been connected.

After about a few minutes, these workers exited the test platform, the door of the test platform began to close, and the huge air intake grille began to slowly open.

A technician in charge walked over quickly and reported loudly: "Mr. Yu, Mr. Yi, everything is ready and you can enter the test run procedure."

Yi Chunhua looked at Yu Shaoguang.

Yu Shaoguang nodded slightly.The test run was about to start, and some people were inevitably happy and slightly nervous, and the entire test run control center gradually became quiet, and all the test drivers and technicians took their positions one after another.Tang Fei and Zhang Ping also sat down on the chairs, waiting for the upcoming test drive.

At [-]:[-] in the morning, the first test run alarm bell rang throughout the entire test drive center factory area. Everyone knew that the test run of the drone engine was about to start.

At 25:[-], the alarm bell rang for the second test run!
At ten thirty, the third test run alarm bell!
Yi Chunhua said loudly: "According to the test program and test program, start the official test run!"

As soon as his words fell, a competent technician personally pressed the green start button, and the engine on the test bench began to start at a low speed.

The entire set of test technical outline comes from the system, which was provided by Jiuzhou Industrial Group at the beginning. It is very scientific and detailed. It is clear what the first step is and what the second step is.

The test drive begins!
All testers and technicians are methodical and operate in strict accordance with the test technical outline.Tang Fei watched carefully, and from time to time looked at the engine on the test bench through the glass, and at the various instruments and meters in the test control center, as well as the data on the display screen, etc. from time to time.

The time is 1 minute, and 1 minute has passed.

A satisfied smile appeared on Tang Fei's face.At this time, both the technicians and Yi Chunhua all showed joy. Everyone knew that all the data were excellent and fully met the data requirements in the technical outline of the test run.

Zhang Ping also seemed to see something, but he was not sure, he cast a questioning look at Tang Fei.Tang Fei nodded slightly.

The test drive took about an hour.

After the engine stopped on the test stand, cheers erupted in the entire test control room, and then everyone applauded violently.

Yi Chunhua said loudly: "This is the smoothest and most perfect test run of ours. All the data completely meet the requirements of the test drive technical outline. It's a little unbelievable!"

The test drive was very successful!
Tang Fei was completely relieved, and Zhang Ping said a little excitedly: "Mr. Yu, Mr. Yi, that means the performance and quality of this engine are very good!"

Yi Chunhua said in a very positive tone: "Yes, whether it is performance or quality, it has exceeded our expectations, and it is very good."

Produced by the system, it must be a boutique!
This is an engine designed by the system, and its overall performance is very good. Even the engine's manufacturing technical data comes from the system. Factory 336 manufactures it strictly according to these technical data, and the quality of the engine is also very good. Or the quality of the engine is reflected.

Seeing what Yi Chunhua said, Zhang Ping was relieved and happy, "Mr. Yu, Mr. Yi, you have done a great job. Our first engine has been truly manufactured."

Successfully passing the first test run means that the engine has been manufactured successfully.

Yu Shaoguang said modestly: "It is mainly due to the Jiuzhou Industrial Group. If there is no detailed technical information, if there are no metal materials provided, if they do not help us with the processing of those high-precision parts, our machine The engine could not have been built so smoothly."

Tang Fei smiled and said, "Mr. Yu, you are too modest."

After everyone gave way, Yu Shaoguang said, "It's already twelve o'clock at noon, let's go to eat first, and in the afternoon, we will go to the aircraft assembly workshop to see the disassembly of this engine."

According to the requirements of the test run technical outline, after the first test run, the engine will be returned to the aircraft assembly workshop for disassembly, disassembly into parts and components, and then a serious inspection.

The main thing is to see if there is any impact on the various parts of the engine after a test run. If there is an impact, it will be troublesome. It is necessary to carefully analyze the cause and take measures.

Tang Fei and Zhang Ping readily agreed, and everyone went to eat first.

A group of people left the test workshop, got in the car and left, and went to a nearby farm with a good environment.Yu Shaoguang had already prepared, and had already prepared a sumptuous lunch there.

Everyone didn't drink, but only drank some drinks, because there is still very important work in the afternoon, and we need to take a look at the condition of the various parts of the engine after it is disassembled.

After the meal, everyone walked into the aircraft assembly center at about two o'clock in the afternoon. At this time, the engine had already begun to be disassembled and disassembled.

Several backbone technicians are already there, and several workers are already disassembling the engine skillfully and quickly.

Disassembly is much faster than assembly. It takes several days to assemble an engine for the first time, but it takes less than an hour to disassemble the engine into several major parts.

These large parts were further disassembled, and finally were disassembled one by one. These parts were placed neatly on the inspection platform. Several experienced quality inspectors wore white gloves and held flashlights, carefully Inspecting, even those few technical backbones are also checking the situation of some key parts.

Everyone walked over.

Yi Chunhua came over with a few pairs of white gloves, and gave Tang Fei and Zhang Ping a pair of brand new white gloves.Tang Fei put on brand-new white gloves, walked happily to the neatly placed parts, and first picked up a turbine blade to look at it.

Seeing this, Yi Chunhua was secretly astonished, and thought in his heart, it seems that Tang is always an expert, knowing that the first thing to look at is the turbine blades.

Generally speaking, after the engine has been tested, it has the greatest impact on the turbine blades, and the service life of the turbine blades is also the shortest in the entire engine.

Tang Fei picked up one of the turbine blades and looked at it, then nodded slightly. From his professional point of view, this turbine blade has basically no effect.

After looking at several other turbine blades in a row, the situation is similar.Then, Tang Fei looked at some other parts. After seeing a few key and important parts, Tang Fei gradually felt relieved.

This test run basically had little effect on the various parts of the engine.

The few quality inspectors and key technicians are working hard, meticulously checking the appearance of each part, or carefully re-measure the various dimensions of the parts, and record them.

Seeing that Tang Fei didn't continue to look at the parts, but took off the white gloves he was wearing, Yu Shaoguang invited: "Mr. Tang, Director Zhang, let's go and have a rest. We can leave the matter here to Mr. Yi and the others." .”

Yi Chunhua also said: "Boss Tang, Director Zhang, don't worry, there will be results tomorrow morning, and I will report the situation to you two in detail tomorrow morning."

Tang Fei also felt that there was no need to check these parts himself, because he felt more at ease in his heart, and readily agreed: "Okay, then let's go and have a rest."

Yu Shaoguang took Tang Fei and Zhang Ping to his office building, and entered a reception room, where everyone sat drinking tea and chatting about the day relaxedly.

The first test run of the engine performed well, and the pressure in Yu Shaoguang's heart was greatly relieved, and he felt relaxed.

the next day.

Tang Fei and Zhang Ping went to the aircraft assembly center of Factory 336 again, where Yi Chunhua gave them a detailed introduction to the inspection of various parts after the engine test run.

Through comprehensive inspection, it was concluded that all parts of the engine had completely passed the test of the first test run, and there was no change in the parts.

After Yi Chunhua reported the situation, he said confidently: "We have full confidence in this engine, no, it should be said that we have full confidence in this engine. We will reassemble this engine and then conduct a second test run. Then there will be 100 hours, or even 300 hours of long trials."

"Many parts of the second and third engines have been manufactured, and we will hurry up to manufacture the unfinished parts. It is estimated that the general assembly of the second engine will start around New Year's Day..."

The excellent performance of this engine gave him full confidence, and he was obviously preparing to do a big job, preparing to speed up the production and manufacturing progress of the second and third engines.

According to the plan, the first engine is mainly used for test run verification, not for delivery.The second and third engines were delivered to Jiuzhou UAV Company and will be installed on the first UAV in the future.

Tang Fei said: "Mr. Yi, I am waiting for your news, and I also earnestly hope that you will manufacture the second and third engines as soon as possible and deliver them to Jiuzhou UAV Company."

"Definitely, definitely." Yi Chunhua promised: "We will manufacture those two engines as soon as possible and deliver them to Jiuzhou UAV Company as soon as possible."

Hearing the conversation between the two, Zhang Ping became happy, relieved, and laughed.

After lunch, Tang Fei and Zhang Ping left Factory 336 happily.Zhang Ping returned to the capital, while Tang Fei returned to Shenhai City and his Jiuzhou Industrial Group.

Within a few days of returning to Shenhai City, Tang Fei received a fax from Europe, inviting Tang Fei to go to Europe, because the first subway locomotive for the London subway project has successfully landed at the European factory of Siemens Vehicle Group and can be delivered immediately to London.

This is the first subway locomotive to be delivered for the London Underground project.

.........

Today is the third update, and the second update will be delivered!

(End of this chapter)