God-level industrial master

Chapter 651 The Legendary "Welding Emperor"

The car didn't stop, and drove directly into the drone's manufacturing plant, with a very clear goal, heading towards the aircraft assembly plant.

The car was unimpeded.

Xu Guangming was driving the car, and Tang Fei was in the car.

Early this morning, he set off from the big villa to the factory of Jiuzhou UAV Company in Guancheng City. Tang Fei mainly wanted to see the progress here.Just yesterday, Tang Fei received a report call from Liang Xiaofeng.

During the phone call, Liang Xiaofeng reported the current situation of Jiuzhou UAV Company to Tang Fei comprehensively.He told Tang Fei that a processing plant had already been put into use, and the production of some drone parts had begun.

The large-scale aircraft assembly plant is also approaching the final stage, and the installation of some tooling and equipment in the plant has already begun, and the general assembly of the first drone will begin in about one or two months.

This is something Tang Fei has been looking forward to for a long time. After listening to Liang Xiaofeng's report, Tang Fei came here today. The off-road vehicle drove straight into the drone manufacturing plant. The goal was very clear, and he went straight to the final assembly plant.

The first thing to look at is the situation of the assembly plant.

The relevant spare parts of the first UAV have basically been produced and manufactured, and all purchased parts have been purchased in place.The airframe components are also in place. As soon as the factory building is completed, the general assembly of the first drone can begin immediately.

The off-road vehicle arrived at the gate of the final assembly plant.

This is a huge building with a height of three to 40 meters. Even a large passenger plane like Boeing 737 can be assembled normally in this factory building, which shows the scale of this factory building.

When Tang Fei got out of the car, he saw a total of three large trailers parked outside the factory building at first glance. Each large trailer was loaded with things and was tightly covered with tarpaulins.

This should be the tooling required for the final assembly of the drone. It is designed by the system and manufactured by a professional manufacturer outside, and it is now delivered here.

Tang Fei also knew that the first batch of tooling had arrived as early as a week ago, and now it has basically been installed and can be used for the final assembly of drones in the future.

"Come on, let's go in."

Tang Fei glanced at the three large trailers, then walked into the huge factory with a wave of his hand. After entering, his eyes lit up slightly, and he sighed in his heart, compared with what he saw last time, there is a lot here again. Variety.

The factory building is no longer empty, but has a lot more equipment and tooling, some of which are very large and tall, and they will be used for the final assembly of drones in the future.

After these equipment and tooling are in place, a large-scale drone assembly line has begun to take shape, and its prototype can already be seen, and many workers and technicians are busy in the factory.

Liang Xiaofeng was also in the factory building.

These days, he basically spends most of his time at the production site, and the assembly plant where he spends the most time. Seeing the changes in this plant every day, he feels a strong sense of accomplishment in his heart.

"Boss, you are here!"

Seeing Tang Fei's figure, Liang Xiaofeng immediately ran over and greeted Tang Fei happily.

Tang Fei said with satisfaction: "Old Liang, the changes here are not small. Some equipment and tooling have begun to be installed. The first drone assembly line has begun to take shape. It seems that the first one or two months will be carried out. There is no problem with the general assembly of the drone."

Liang Xiaofeng said confidently: "Boss, after the Lunar New Year, we will start the final assembly of the first drone. Now everything is ready, and we only owe Dongfeng."

All the spare parts of the first drone are basically in place, including the drone's avionics system, optical imaging system, infrared imaging system, drone body parts and so on.

As long as this factory building is completed, the final assembly of the first drone can begin.

Hearing this, Tang Fei was also happy, and said loudly: "I'm waiting for your good news. When the first drone starts to be assembled, I will definitely come and have a look in person."

After finishing speaking, Tang Fei waved his hand and said, "Let's go, first accompany me to visit our final assembly plant."

Liang Xiaofeng accompanied Tang Fei on a tour of the factory building. Tang Fei looked at it carefully and carefully, and nodded with satisfaction from time to time.

During Tang Fei's visit, the three large trailers drove slowly into the large factory building, and they stopped in the designated area.After the car was parked, the tarpaulin covering the car was untied, revealing the very advanced large-scale tooling on the car, the drone general assembly tooling designed by the system.

Under the command of the technicians, the workers began to hang the tooling from the large trailer and began to install the tooling.

After visiting this large factory building, Tang Fei was very satisfied. He waved his hand and said, "Old Liang, you reported on the phone that a processing factory building has been put into use. Come on, let's take a look."

Liang Xiaofeng said: "The production of some parts has been started there for several days, and some parts of the second drone are currently being produced."

All the components of the first drone are in place, just waiting for the final assembly.The parts to be manufactured belong to the second drone. Except for some purchased parts, other parts are basically manufactured in this factory area.

Including the production of body parts, the aircraft factory in Northwest China only produced the body parts of the first drone, and the body parts of the second drone were produced by Jiuzhou UAV Company itself.

Accompanied by Liang Xiaofeng, Tang Fei walked into the manufacturing plant with great interest.

This is a manufacturing plant for sheet metal parts, covering an area of ​​more than [-] square meters. The construction standard of the plant is very high, the ground is clean, and people can almost be seen, and the entire plant is also neat and tidy.

There are already many workers in the factory, and everyone is busy with the production of some sheet metal parts.

Sheet metal parts are one of the most common types of parts in aircraft manufacturing, and drones are no exception. There are many sheet metal parts.They are blanked, stamped, welded or riveted from aluminum alloy sheets, and then undergo a series of mechanical processing.

Some sheet metal parts for the second drone are being fabricated.

In some blanking processes, the aluminum alloy sheet is cut into various predetermined shapes by various cutting machines, and then formed by stamping, or directly started welding.

In the welding area, Tang Fei saw a number of welders welding the parts, and immediately became interested and walked over. Now he looked carefully at the side, and found something unusual.

Among them was a middle-aged welder who was proficient in his movements and showed a high level of welding technology. There happened to be a welded part next to him.

Tang Fei took two steps forward and looked at the part carefully.

Soon Tang Fei showed a look of surprise, and waved loudly: "You all come and take a look, how beautifully this part is welded!"

Everyone came together one after another.

Liang Xiaofeng even said: "This is the most beautiful welded piece I have ever seen. I didn't expect that among our workers, there are such welding masters."

After being praised, the middle-aged welder who welded the beautiful parts smiled a little shyly. He was obviously a little introverted, and he was the kind of person who said nothing and only focused on doing things.

On the contrary, there was a young welder next to him who seemed more outgoing, and he said loudly: "Leaders, Lao Han used to be a technical expert in their unit. unique skills."

Welding Martial Emperor!
This is more interesting and very graphic.Even Tang Fei himself laughed.

Through questioning, Tang Fei also finally found out that "Old Han" is called Han Riming, a worker in a pressure vessel factory in Guancheng City, but the factory is not well managed and is about to close down. It just so happens that Jiuzhou UAV Company recruits a large number of workers. Han Riming is now A welder at Jiuzhou Drone Company.

Tang Fei warned: "Old Liang, we must not treat people with unique skills like this badly, we must give them good treatment, let them work here wholeheartedly, and contribute to our drone production."

"Okay, boss, I won't treat them badly."

Tang Fei stayed at Jiuzhou UAV Company for almost a day, and Xu Guangming returned to his big villa in Shenhai City until the evening.

Tang Fei was very satisfied with the progress of the entire Jiuzhou UAV, and he hadn't thought that the Jiuzhou UAV Company had accidentally picked up a loophole and recruited a talented person like Han Riming.

To Tang Fei's great satisfaction, the final assembly plant of the drone is about to be completely completed, and the final assembly of the first drone will start in one or two months.

The first processing plant has also been put into use, and the production of some parts of the second drone has begun.Tang Fei thought in his heart that in 2004, there will definitely be many drones flying into the blue sky, and he will also win the first military order in 2004.

Tang Fei has no doubts about the market prospect of this drone!

It is a UAV comparable to the "Global Hawk" of the United States. Once the trial production is successful, the military will definitely order a large number.With such advanced drones, the strength of the military is estimated to be invisibly improved by a small amount.

This is the first drone produced by Jiuzhou UAV Company. Tang Fei has already made up his mind that when it is successfully trial-produced, he will develop the next drone.

……

336 factories.

On the test platform, the exquisite engine gradually stopped, and soon, the entire test site burst into cheers, and some people even jumped for joy.

Looking at the engine of the drone on the test bench through the huge soundproof glass, Yi Chunhua thought in his heart that he finally successfully passed the 150-hour long test.

Judging from the current test data, the performance of this engine is perfect, very good.

……

There are two updates today, and the first one will be delivered.

Today I was invited to Changsha to attend the inaugural meeting of the CS Internet Writers Association. I didn’t have time to code words, so I can only write two chapters today.

(End of this chapter)