God-level industrial master

Chapter 697 Joint Acceptance
Americans are relatively well-informed.

The day before yesterday, Tang Guoqiang secretly and low-key visited the Jiuzhou UAV Company for inspection. In just two days, they got the information.

The American general informed other members of the American military about the situation. Immediately, there was a look of worry in the entire conference room, and many people guessed something.

As a general-level figure, Tang Guoqiang will not go to Jiuzhou UAV Company for no reason, and there must be a reason for his going.

Some people in the U.S. military speculate that it may be that the development of Huaxia's drone has made significant progress. Could it be that the final assembly of the drone has already begun, or have some other phased results been achieved?

In the conference room, there was a buzz of discussion, and many people were talking in low voices with their heads turned.

They are full of worries about this large drone of Huaxia, and they have always felt strong pressure, because this is a large drone that is comparable to their "Global Hawk" drone.

Many of them have yet to accept the fact that their "Global Hawk" drones cost a lot of money and took many years, and until now only four have been produced.

As for Jiuzhou UAV Company, it has been less than two years since they learned about the development of that large-scale UAV. The factory area of ​​Jiuzhou UAV Company has not only been fully completed, but may have already The assembly of the first UAV began.

The US military general said directly: "Everyone, according to our information, Jiuzhou UAV Company may have officially started the assembly of the first UAV."

what!
Although some people had such speculations in their hearts, when the words came out of the mouth of the US military general, the expressions of the other people in the conference room changed slightly.

If this is the case, the progress of Jiuzhou UAV is too fast.

In fact, Jiuzhou UAV Company's first UAV has been basically assembled and is about to usher in the joint acceptance of the military expert group.

How would they feel if they knew this.

.......
Northwest Aircraft Works.

In the office, the chairman Zhong Yong was talking with his chief engineer Gu Junping.The content of the conversation between the two is related to the "Xianglong" large drone.

They once sent dozens of technicians to Jiuzhou UAV Company to study. A few days ago, these personnel have returned from their studies and brought back valuable and very advanced aircraft assembly technology. It can be foreseen that the Northwest Aircraft Manufacturing Plant The level of aircraft manufacturing, especially the level of general assembly of aircraft will be improved a lot, and they will benefit a lot.

Zhong Yong said gratefully: "We need to keep this kindness in our hearts. Without Mr. Tang's help, our people would not be able to bring back such advanced assembly technology."

Gu Junping next to him nodded approvingly.

After these people returned, Gu Junping also specially held a sharing meeting to let these people share their experience. It can be clearly felt that they have gained a lot.As the chairman of the board, Zhong Yong also participated in the sharing session.

In addition to thanking Tang Fei and Jiuzhou UAV Company from the bottom of their hearts, they also chatted about the first large "Xianglong" UAV.

The military has set up a joint expert group, which includes not only its own experts, but also experts from major aircraft manufacturers, universities, and scientific research institutions. There are more than 20 people in total. The lineup is very large. .

It can also be seen how much the military attaches importance to this drone.As the technical director of Northwest Aircraft Manufacturing, Gu Junping, the chief engineer, was also fortunate to be a member of the expert group.

He said modestly: "Tomorrow I will leave for Jiuzhou UAV Company. This time I will mainly go there with a learning attitude."

Zhong Yong nodded approvingly, "Old Gu, I think your attitude is very correct. In addition to having a deep understanding of this drone, I think it is mainly for learning."

I hope that through this acceptance test, I can learn about the advanced technology of the "Xianglong" large-scale UAV. I hope that I can learn by analogy and help my career. If I can get some inspiration and provide help for the development of new aircraft in the future, then It's even better.

After straightening his mind, Gu Junping also said in admiration: "We only delivered the large parts of the first drone body to Jiuzhou UAV Company last year, and it has not been a year yet, such a short period of time. They produced the first drone, which is unimaginable, and it can be described as super fast."

"Yes, the speed is not so fast. If it is placed on us, this speed is completely impossible. This is worth learning."

The two talked about the first drone of Jiuzhou UAV Company with admiration. With a learning attitude, Gu Junping found that he had a lot to learn from Jiuzhou UAV Company.

Led by the military, the members of the joint expert group set off for Jiuzhou UAV Company to conduct a joint inspection of the first UAV that completed the final assembly.

This is also the first acceptance.

There are at least two to three such joint acceptances. When the first "Xianglong" large UAV completes its maiden flight, it will usher in the second acceptance.After maybe some significant design verification, there is a third acceptance, which is also the final acceptance.

A total of more than [-] experts began to arrive at Jiuzhou UAV Company.

Of course Tang Fei knew about this matter. This is not only a big event for Jiuzhou UAV Company, but also a very important event for the entire Jiuzhou Industrial Group.

According to Tang Fei's instructions, Wang Hailong went to Guancheng City on behalf of Jiuzhou Industrial Group to receive the joint expert group in order to express the importance that Jiuzhou Industrial Group attached to this acceptance.

Jiuzhou UAV Company has already made all the preparations. Not only has it sorted out all the relevant materials needed, but the "Xianglong" UAV has also been completely assembled. It is quietly in the center of the assembly plant, Waiting for the arrival of the expert group.

Tang Fei didn't go to Jiuzhou UAV Company for the time being, and only went there when he was preparing to hold the final inspection and summary meeting, because Li Xueyan's labor date is getting closer and closer, only about a month away, and she may give birth early at any time.

In the past two days, Li Xueyan felt a little uncomfortable, which made Tang Fei more nervous.Li Weibin and Xiao Meilan stayed close to Li Xueyan, and even Tang Xuewen and his wife hurried over from Qingjiang City to live in the big villa and take care of Li Xueyan.

Seeing her husband being so considerate and her elders caring about her so much, Li Xueyan with her big belly looked happy.

She said softly to Tang Fei: "Brother Fei, I'm fine, the little guy is probably a little naughty, he just wants to come out earlier."

Tang Fei gently stroked his wife's swollen belly, and said softly: "That's not okay, little guy, I'll tell you, you have to stay in it for ten months before you can come out."

Seeing Tang Fei like this, Li Xueyan burst out laughing, "Brother Fei, he is so young, how can he understand you?"

"I don't care." Tang Fei looked like a domineering president, pretending to be very serious, "Boy, you have to stay for ten months before you can come out, otherwise, I will spank you."

Li Xueyan smiled again, her face was full of happiness.

Gently leaning his head on Tang Fei's shoulder, he said softly: "Brother Fei, the military's expert team has arrived at Jiuzhou UAV Company, you just have to take a look, I don't need you to worry about it here. , there are parents and them."

Tang Fei gently held his wife's little hand, and said softly, "No hurry, we'll talk about it in two days, and I'll just go over there when the final inspection summary meeting is held that day."

This morning, more than [-] members of the joint expert group arrived at the factory of Jiuzhou UAV Company. The military leader for this inspection is Zhang Ping.

After everyone arrived at Jiuzhou UAV Company, they were warmly received by Wang Hailong, Liang Xiaofeng and others, and went to the prepared meeting room first.

Everything in this meeting room is ready, not only hot tea, various fruits and snacks, but also various materials needed for acceptance.

In addition to the general manager Liang Xiaofeng, the accompanying personnel of Jiuzhou UAV Company also included Fei Dongming, the technical director of Jiuzhou UAV Company, several key technicians, and so on.

Fei Dongming and the others are mainly responsible for the technical market, such as facing some technical inquiries from experts and so on.

Everyone entered the meeting room, and after sitting down, Liang Xiaofeng gave a welcome speech, and then Fei Dongming introduced the situation of this drone to the experts.

The introduction materials are very detailed, and Fei Dongming is even more specific. He introduced the technical advantages and powerful functions of the "Xianglong" large UAV.

After listening to the briefing, the next step is to enter the formal joint acceptance stage.

There are two main contents of this joint acceptance, one is to check and accept the relevant technical data, review the rationality and completeness of these materials, and so on.

The second is the review of the actual object. The experts will specifically review the actual object of the first "Xianglong" UAV, including its related manufacturing materials, quality information and so on.

Throughout the acceptance process, the experts will also ask various questions, requiring detailed answers from Liang Xiaofeng, Fei Dongming and others.

According to the plan, there are three days for such acceptance, and today is the first day.

This morning, I mainly listened to some introductions about drones, and then everyone had dinner in the factory area of ​​Jiuzhou UAV Company.

After lunch, everyone took a rest.

In the afternoon, they started to act separately, and some experts stayed in the meeting room, mainly reviewing the technical data of the drones, checking their integrity and rationality.

Another group of people went deep into the production site, mainly looking at the manufacturing process of the various components of the drone, and focusing on the physical condition of the first drone, especially its quality.

Under the leadership of Liang Xiaofeng, several military personnel including Zhang Ping, and more than a dozen experts, a group of us walked into the huge UAV final assembly plant.

After entering, many people saw the "Xianglong" UAV in the middle of the factory at first sight. This aircraft immediately attracted everyone's attention!

.......
Today is the third update, and the second update will be delivered!

(End of this chapter)