Fengcheng old events

Chapter 365 The first day of production

"Is it really a hundred?" Xu Guangli asked Liu Sanzi with wide eyes.

"Is it still fake? When I say it, I will pay for it myself? The other side agreed, and I went to weld it quickly, and I will transfer to the car soon. Don't be idle, go out and go around, and transfer to the new factory immediately. "

"What kind of thing is this called? I've been going around for a while, and I haven't even done a single shift. Now it's time to finish work. I might as well just wait until the end of the shift." Several old workers grumbled as they put on their hats.

"Who decides whether to turn it or not? What I say? What I want to say is not to turn it every day. If you have the ability to go on, scold the head of the election."

The production of crushed ore has to follow the separation, and the separation follows the large mine trough, extending upwards layer by layer, and those on the top can only follow, without autonomy.

Xu Guangli took the safety helmet and put it on his head, and said to Lao Kou with a smirk: "Old Kou, can I help you with welding? Don't you want to move? Just rest."

"Get out, see the money, right?" Old Kou went to get the welding torch: "This can't let you, it's not a matter of money or not, I have to fix my post, we have to be responsible in doing things, how can we Just let someone else do the job, don’t you think so?”

Everyone burst into laughter, it was the first time I saw someone talking about seeing the money eye open so high, and just now they were talking about stopping it even when changing trains.

"Look at how happy Lao Kou is, this guy can't hold back his little tongue."

Hahaha……

100 yuan is a lot of serious money at this time.

Zhang Xinglong also buckled on his safety helmet and put on his mask, and came out of the lounge with a shovel in his hand, and went to the post for a while.

After all, it was a position I had just taken over, and I was not familiar with it at all, so I had no idea.

As soon as he walked to the side of the belt conveyor, the whole workshop suddenly shook.Buzz~~, with a scream, the machine started to spin up, and the dust flew up in an instant, and the quiet and tidy factory building was filled with dust in an instant.

The equipment is linked from the beginning to the end. The start of a production line starts from the very end and goes up step by step. The last thing to move is the feeding belt, which is Zhang Xinglong's place.

As soon as the two belts turn, production begins.

First, it idling for a while, and then the ore began to appear on the belt, not much at first, and then gradually covered the belt, and the rollers made a squeaking sound.

The ore goes up along the belt, and when it reaches the end, it falls into the crusher. It is crushed by the big mushroom head of the crusher twisting back and forth, rubbing and crushing, and falls onto the belt below and enters the sieve.

The dust is mainly raised from the sieve, and the sieve mesh welded by finger-thick iron bars vibrates violently under the action of the motor, and the ore coming down from the crusher goes to the sieve mesh along the belt.

Swish, swish, swish, qualified ones fall down the sieve, unqualified ones go to the bottom of the sieve and return to the crusher, and the dust generated by the crushing of ore suddenly rushes into the air.

The dust accumulated on the equipment casing and railings around the sieve is as thick as a palm.

The dust removal equipment runs across the entire workshop, above the beltway, the crusher and the sieve, but cannot rotate.Once the ore is turned, all the ore turns into mud, and there is no way to produce it, and it cannot be transmitted at all.

These dust removal equipment, which cost a lot of money to install, are turned around twice a year at most, once when the factory leaders come to check safety, and once when the company leaders come to inspect production.

There will be advance notice, and then production will be stopped for two or three days from crushing to sorting, and a comprehensive cleaning will take place. The entire workshop will be completely new and spotless, with red, green, and blue paint shining brightly under the lights.

……

The equipment of the whole workshop is finally assigned to the control equipment of the team operation room according to the production line.

An iron cabinet on one wall, with various instruments and buttons on it, and toggle switches.

Row after row of lights flicker from top to bottom.A row of lights is a production line, and each post is finally displayed here as a small light.

The red light is the stop state, and the green light is the running state.

Where there is a problem with the equipment, the people in the operation room can see it at a glance, and then call to notify or deal with it urgently.

The toggle switch on the control board is the master control switch of the entire production line, also called linkage switch. When this side is toggled, the entire production line will automatically start in sequence from the end to the end.

There is no need to artificially go to the post to operate.

The workers who usually guard the post are not responsible for the operation and shutdown of the equipment. They just do some cleaning and maintenance work to prevent accidents, and pick out the steel bars and iron plates that were leaked from the previous process.

Only in emergency situations will the start-stop switch on the post be used. As soon as it is turned here, the squad leader will gallop over with a big flashlight, afraid of accidents, and even more afraid of major accidents.

Usually, the squad leader and deputy squad leader are the last ones to change their clothes when they get off work. One of them goes to the key post with a flashlight to check, and the other waits at the entrance of the bathroom to count the number of people.

Don't dare to be a little sloppy.

When they found out that anyone hadn't come back by the time, they would rush to the scene to look for them. Generally, those who came back late for whatever reason would be scolded.No one retaliated, and they all admitted their mistakes with a smile.This is taking responsibility for your life.

At the beginning of the rotation, because of the instability, the belt shakes or something, some ore fragments will fall out, and as the belt runs smoothly, it will no longer fall off.

Zhang Xinglong took the shovel and shoveled the fallen ore into a pile, picked it up and threw it on the belt.

The top of the belt spout is more than two meters above the ground, so it is necessary to throw the ore on it, and be careful not to hang the shovel on the belt.

After the pinch is clean, Zhang Xinglong thought for a while, put down the shovel and pulled the high-pressure water pipe, and moistened the ground once. It looks much more comfortable, although it will be covered with dust after a while.

Climb up the iron ladder and look into the sliding partition. Everything is normal. There are no steel bars, no iron plates, and no large pieces.It is also an accident that a large piece of ore is produced here, but it is the responsibility of the middle crushing side.will damage the crusher.

Just like this, I chatted in the lounge for a while, and went to the post for a while, and soon the time of a shift passed.

The day shift is handed over at 04:30, and the road sweeping work starts at four o'clock. The post must be cleaned up within half an hour, the ditch and the pump pit must be cleaned, and then the shift will be handed over.

There is no need to stay at the post when the shift is over. When it is time to go back and take a shower, go back and take a shower. If there is a problem, the first shift will go to find it.Generally, there is nothing wrong with it, and it can be cleaned up.

Carrying the shovel back to the lounge, put the shovel and helmet away, and took off the mask, a group of living ghosts suddenly appeared in the lounge.

Except for the area covered by the mask, each face is covered with black dust and muddy water, washed away by sweat, and if you are not familiar with it, you will not be able to tell the appearance.

The clothes are not taken off, they are full of dust and sweat, and they are put on directly, and they take the soapy towel to the bathhouse, and wash them together with the clothes.

After washing, he ran back to the lounge naked, hung the clothes on the armrest of the chair, dried himself and put on clean clothes.

The corridors are full of big men with bare buttocks, and the small north wind is blowing in the corridors in winter, and everyone doesn't care at all.got used to.

After getting dressed, everyone looked like a dog, and they went home together with lunch boxes in their pockets, talking and laughing.

(End of this chapter)