Military industrial hegemony

Chapter 154 Be a Pioneer of the Times——The Motorcycle Factory Unveiled

The running-in of the motorcycle factory is still going on, and now the raw materials there are basically in place, and the trial production experiment is in progress.The overall effect is not bad, and some progress has been made in various aspects. For example, the production of motorcycle tires belonging to the walking system has been completed. After comparing the produced ones with some samples prepared by Jiang Chen, it was found that Reached the ranks of excellence.The next step is the wear test. Originally, Jiang Chen asked them to run on his own straddle, but everyone disagreed. Finally, he let Chen Guorong know, and gave him a good reprimand, saying It was too risky for him to try it himself.So Jiang Chen had no choice but to find someone to ride a few motorcycles and straddles with the tires they produced to conduct a wear test.Judging from this series of data, it far exceeds the leading level of similar domestic products, which makes everyone celebrate.

Of course, there are many unsatisfactory things, such as the production problem of this engine.Jiang Chen and the others are already trying to produce the most basic 125-type single-cylinder engine. Compared with other high-displacement engines, this type of engine is relatively easy, so Jiang Chen and the others have considered for a long time and plan to start here.Moreover, the structure of the motorcycle it is equipped with is relatively simple compared to other models.The simple structure means that its cost is relatively cheap, which can reduce the initial cost of training workers for motorcycle factories.In addition, the 125 model is simple, which is very suitable for the production of workers who go in and out of the industry.One of the main reasons is that it is cheap, so the sales price is also very cheap. It is a good choice to use it to open up the market.

Back to the question of engine production.They have produced several good engines, but none of them are qualified.It is not because of the rough production process that the size does not fit and the installation fails, or it is all installed and the ignition cannot be ignited.It finally ignited, but the sound inside was very noisy, and it didn't run smoothly like a normal engine.After changing the production process and finally solving this problem, a new problem arises.Everything works fine at low speeds, and the displayed data is better than other reference engines of the same type.But once it is refueled to make it run at a high speed, the problem arises, what?That was an oil leak, and it was a very serious one, which made it impossible for some master craftsmen and Martin's technicians to do anything about it.

They also conducted public relations for this, and finally found the cause of the problem.That is the material of the alloy part of the shell. Although it is the same as the formula given by the German side, the impurities in it are different because of the different regions, which causes them to produce uneven expansion during high-speed operation. Make the shell deform or crack.Therefore, the key to solving this problem is the material problem, so Jiang Chen and the others also conducted tests on the raw materials of the materials, and eliminated the supply of materials with a lot of impurities.

There is another way, that is the low-temperature assembly technology of the engine proposed by Jiang Chen.The so-called low-temperature assembly is to put all the parts into low-temperature liquid nitrogen for immersion, and then install them immediately after taking them out. According to the characteristics of metal thermal expansion and contraction, they shrink to a certain extent during the low-temperature process, so that the installation will The engine parts are installed more tightly, so that they will also make the state of each part consistent during high temperature operation, so that other problems will not occur.This technology has just been proposed at the initial stage at home and abroad, but Jiang Chen proposed to apply it to the actual production process.Although some people objected at first, under Jiang Chen's insistence, he tried to install one or two, and found that the effect was very good. The problems of oil leakage, noise, and irregular vibration that existed before were all solved.This made everyone cheer up.And Martin shouted directly at Jiang Chen; "Jiang, this is definitely a great pioneering work."

Of course, this is only an important component, and the production of a motorcycle still needs all parts to be able to do it.But Jiang Chen still can't be anxious about this matter, he has to take it step by step.Often the result of being anxious will make things more complicated and difficult.But Jiang Chen was not in a hurry, but other people were in a hurry. For example, the leadership team of the B17 factory asked Jiang Chen more than once about the progress of the matter.There are also the leaders of the Science and Industry Committee, and the "concern" of the leaders of the First Ministry of Machinery and the Fifth Ministry of Machinery, which made Jiang Chen start to smile bitterly. This has not been successful yet, and he has to choose a camp.The Ministry of Machinery is mainly responsible for the civilian machinery industry, and Jiang Chen's motorcycle factory obviously falls into this scope.The Fifth Ministry of Machinery belongs to the weapons industry. This is the superior of the B17 factory, and the motorcycle factory is nominally under the name of the service company of the B17 factory, so it is under the jurisdiction of the Fifth Ministry of Machinery.Regarding the dispute between the two parties, Jiang Chen is not interested in responding. Whoever you say belongs to him, as long as it does not affect our daily production work.

The other one is the local government, from the county level to the basic level in Anxi City and then to the provincial level. They are all paying attention to the production progress of the factory.In particular, the deputy head of Lu ran here every three days to check the production progress.Now that the factory is in their district, everyone is paying attention, so he, who is in charge of industrial development, is under a lot of pressure. If he fails to achieve results, it will be a joke for his colleagues.Jiang Chen could also understand his difficulties, so he made people speed up the progress of the next work.

Finally arrived on a certain day in mid-August, the weather was fine and it was a good day for the unveiling ceremony.Many people came here today, including the leaders of the Science and Industry Committee, representatives of the First and Fifth Machinery Ministries, and provincial and municipal leaders.Deputy District Chief Lu and the others participated as escorts, and they were not qualified to host such a big project.Amidst the lively sound of gongs, drums and firecrackers, the red cloth hanging on the huge stone engraved with the name of the factory at the entrance of the factory slowly fell down.There are several bright red characters engraved on the black stone - Pioneer Motorcycle Factory.

The reason for choosing this name also represents the expectation of Jiang Chen and others.The so-called pioneer is the person who walks at the forefront, and it also means leading and leading.This is also a manifestation of speed. Only the fastest person or motorcycle can be the pioneer and qualified to be the pioneer.It represents the spirit of active expansion and advancement of all workers in the motorcycle factory.To be a pioneer in the motorcycle industry, to be a pioneer in private enterprises, to be a pioneer in reform and opening up, to be a pioneer in this era, and to be a pioneer in this country and nation.

(End of this chapter)