Siheyuan: The Era of Core Generation

Chapter 72 Zhao Wei Ruo Master Ye
Zhao Ye stayed here for more than half a month, watching one after another equipment being remodeled, installed, and debugged.

The results are quite gratifying. At least the employees in the factory are gradually building up their confidence in completing the tasks.

When everyone was looking forward to the completion of the transformation and the official production, an accident happened.

After the installation of a gantry milling machine was completed, it began to test the machine, but two senior technicians were replaced, and the accuracy could not be achieved.

A group of people started wandering around the machine, wanting to see where there was a problem with the installation.Zhao Ye also got busy with other things and came over.

At first, he also thought it was caused by the installation. After all, the current installations are done by local methods, and there is no cast iron workbench at all.

However, he went up to check and found that although the workers' installation was not perfect, it shouldn't fail to meet their required precision.

So with a wave of his hand, tear it down!
Instead of removing the milling machine from the workbench, the entire milling machine was removed.

Next to the milling machine, a large canvas was laid out, and all the parts were placed on it by category.

Zhao Ye, looking at this and touching that, he knows what's going on in his heart.

Of course, there is not only one Zhao Ye who understands these things in the factory, there are also several senior technicians who look and touch these parts around.

After a few people meet, it can be regarded as finalizing the nature of this machine tool.This guy is a defective product!
The original machining accuracy of [-] was reduced to [-] by the grandchildren of the machine tool factory.The difference is a hundred times.

Now, the technicians in these rolling mills can be numb.What should I do with this thing?

Zhao Ye was also scratching his head, this is not one or two parts, but the production unit of this machine tool, obviously gave up the treatment.The components of this equipment are obviously in a shoddy style. If you want to restore it to the original precision, you need to change more than one point or two.

How to do?
Zhao Ye said that there is only one way, rub your hands!

Three or four senior fitters were summoned, and it was time to use the limits of human hands.

Several people assigned tasks and started the process of rubbing hands.

Hand rubbing is not just rubbing casually, but also requires division of labor and cooperation.

A mechanic is responsible for finding out where parts are unqualified, which can basically be done with various measuring tools.Then hand it over to the corresponding workers, and go to the machine to process it, at least to the maximum precision that the machine can handle.

The problem to be paid attention to here is that it is better to have less than to have more.If there is less, you can make up for it, and if there is too much, it will be scrapped.

Therefore, those who dare to take this kind of work are all technicians above the sixth level in the factory.After the machine is processed, as long as the technician thinks that he dare not or cannot process it any more, the part will be passed to the senior fitter.

A fitter, that is not a worker with pliers, but a worker who uses a vise table to process.

What do you mean, it is to put the parts that need to be processed on the clamp table and fix them, and the rest of the work is handed over to the hands of the fitter.

I saw them picking up various tools, such as files, sandpaper, and even cotton cloth.A hello to some parts of the parts.

Zhao Ye also took this kind of job, but this job he took was a job that even an eighth-level fitter would dread.

Of course, there is no eighth-level fitter here, and the only one used to be sent into the high wall.

Zhao Ye took up this burden bravely, not because he wanted to be brave, but because this kind of work was really suitable for his system space.

In his space, there is no problem of precision. If he is happy, he can process parts one molecule at a time.

Many people looked at Zhao Ye, rubbed his hands with the high-precision screw, and then used a marker to mark the screw in a pretentious manner.

The senior fitters were taken aback, so fast?Ordinary fitters are not so quick to determine which position is more or less.Not to mention them, even if Lao Yi was brought back, he couldn't even do it!
But Zhao Ye can easily do things that others cannot do.In the eyes of the system space, these errors are at the micron level, that is, pinching the snail with three fingers is very stable!
Following the steps of ordinary people, Zhao Ye picked up the steel foil!
"Zhao Gong, Zhao Gong, don't dare to use this." Before Zhao Ye could make a move, the senior fitters who were watching were anxious!

That's a steel foil, how dare you treat this precision screw rod?Can you really know it?Is that what your master taught you?

Precision screw, that is, no matter how poor the machining accuracy is, can it be checked to exceed [-]mm?Do you know how much this steel can be worn away?
Even if this is not mentioned, what you have in your hand is a screw!Has anyone seen a steel setback screw?If the apprentices did this, I would have to scream at him to death.

"Don't worry, just wait and see." Now is not the time for Zhao Ye to hide his clumsiness. Zhao Ye has been waiting for this moment for a long time. It's time to let everyone know his real name.

Zhao Wei rubs Master Ye!

Zhao Ye first used a file, then sandpaper, then silk floss, and then a fine cloth, and under the noses of everyone, he managed to get out a high-precision screw rod in less than an hour.

In fact, if he was really let go, he wouldn't even need half a minute.It is nothing more than throwing it into the space, and then a command, "swipe", it's done!

But this place is in full view, he can't show everyone a little talent.You can only use these tools to cover up, and use the power of space a little bit to "gnaw" locally.

When the shiny screw rod rubbed by Zhao Ye was passed to everyone's hands, everyone held it in their hands and touched it.

They are not actually touched.The hands of these senior fitters are not hands at all at this time, but a high-precision measuring instrument.

Even in later generations, when technology is very advanced, the most precise parts in the world are still rubbed out by hand by craftsmen.Machines have been catching up in the field of replacing human hands, but never surpassed it.

Well, it may not be accurate to say that, in terms of hand speed, humans are still not good.

After the technicians touched each other one by one, they nodded at each other first, and then their admiration for Zhao Ye was like a torrent of water.In the eyes of the technicians, if your technique is good, then you are a master!

"Yezi, you have no problem at all with an eighth-level worker for your craft!" A technician in his 50s said with a thumbs up.

"Yes, yes, no problem." The other technicians also echoed.

"This skill is much better than that of old Yi Ke. Even if he is here, he can't do this." The old man continued.

"It's nothing to say, the next time you apply for the eighth-level fitter, we will definitely let you pass." All the fitters said one after another.

There is an eighth-level worker in the factory, which is what everyone wants to see.There is no doubt about this at all. Even in modern times, a high-tech technician is still an existence that can be met but not sought after in various precision factories.

why?
Because it is too difficult to cultivate such a person!

This is not just about training, it also requires a person's talent.As for talent, in the early days, you can't see it at all.

Without a data-based selection standard, this is the most difficult.

Sometimes you think that this seedling is good, but after half his life, he still stays at a certain level without making any progress.

Sometimes, you think this kid is not good, he looks like a stupid scum, but sometimes, after he has passed a difficult period, the level of technological progress will blow your eyes.

However, the most frustrating thing is that often this kind of stupid scum is eliminated from the very beginning.

So, at this moment, Zhao Ye's preciousness can be seen. How old is he?Less than twenty?Like him, at least he can work for a rolling mill for 50 years!

How can you not be happy.

Zhao Ye didn't think about it so much, all he wanted was to get these things done quickly, and there were more important tasks waiting for him.

Today, I just want to spread the reputation of my micro-twist, so that in the future, he will be able to make some equipment without any scruples.Someone asked, it was rubbed by oneself, do you accept it?
Two days later, the overall trial production passed.

Because of Zhao Ye's excellent skills and the fact that he had solved the practical difficulties of the joint factory, he was given a fitter technical grade evaluation due to the two conditions.

There were a dozen or so people participating. Since it was a fitter technical grade evaluation and so many people were called, it would be a waste for him to come alone. So he asked a few judges to recommend it, and then he did it again. ten or so.

The rating was over, and Zhao Ye was designated as an eighth-level fitter.The judges were eighth-level workers specially transferred from other factories. After the parts processed by Zhao Ye were handed over to these people, everyone was shocked.

This is not the level of an eighth-level worker, that is, the eighth level is at the top. If there is a higher level, Zhao Ye will definitely be able to go to the next level.

Anyway, they are really convinced.

From then on, Zhao Ye rubbed Master's name a little bit, and it was considered a hit.But in the future, some tasks will fall on his head from time to time, this is a later story.

The factory was able to produce normally, so it stands to reason that Zhao Ye should go back.After all, he is still a student.

But he finally had such an excuse to skip class for granted, how could he give up so easily!Therefore, during this period of time, Zhao Ye seemed to have disappeared, and the only person who couldn't see him was a little apprentice who talked about Zhao Ye's current situation from time to time.

Well, yes, Zhao Ye also has an apprentice.Soon after the technical evaluation, the factory asked him to lead an apprentice, which was a task.

Zhao Ye really didn't want to, after all, what did he teach others?

But no, the factory leaders would not agree to him doing this.

What is a task?Even if you don't want to do it, you have to do it.

So, once again, he caught everyone's attention. He picked Ma Hua, who was helping out in the kitchen, to be his apprentice.

As for whether MCA is willing, he must be willing, this is also a task!If he dared to refuse, his father would blow his head off without having to do ideological work for him in the factory.

(End of this chapter)