Scholars in the courtyard.

Chapter 1614 Not worth it

"Before? Did you come up with a new one?"

Yang Youning reacted the fastest and immediately asked.

Seeing this, Yang Xiaotao didn't hide anything. He took out a drawing from his backpack and placed it on the table.

"Isn't this the machinery factory saying that the production of tin-plated iron is not up to standard and a better rolling mill is needed."

"In the past few days, we have redesigned a steel rolling mill, a four-roller rolling mill, which is more suitable for processing thin iron than a three-roller."

Yang Xiaotao spread out the drawings while explaining, with a calm expression.

But several people around him looked at the monster, and all of them remained silent.

It wasn't until Yang Xiaotao spread the drawings on the table that he felt something was wrong with the surrounding atmosphere. At this time, he looked up at a few people, and then saw Mr. Zhang staring at him with burning eyes.

"Chief, what are you looking at me for?"

"Damn, you guy, why didn't you tell me about such a big thing earlier!"

As he spoke, Yang Youning sat down next to Yang Xiaotao, and even reached out to press the design drawing on the table, pretending to look at the drawing carefully.

In fact, I am just afraid of being robbed.

There was nothing I could do, my rolling mill was robbed overnight.

The key point is that I told the above, and it is most likely a quarrel between Huang and Lao.

People have eaten everything in their stomachs, how can you expect them to spit it out?
This mute has to suffer.

Right now, a better rolling mill design is right in front of us, if only...

Looking at Mr. Zhang, he knew the relationship between Mr. Zhang and Mr. Huang.

If it were taken away, it would still be their machinery factory that would suffer.

Hahaha

Liu Huaimin saw the envy in Director Zheng's eyes and quickly laughed loudly.

"Xiao Tao, please tell the chief quickly how our machinery factory is designed."

The sound is particularly heavy on the words "our machinery factory"!

Yang Xiaotao nodded after hearing this, understanding what they meant, and was amused by their vigilance.

Mr. Zhang on the side also calmed down at this time. He almost had a heartbeat just now.

Based on his understanding of Yang Xiaotao, there was nothing wrong with the design drawings this guy produced.

Even if there is, it is because the person who did it made a mistake.

Well, not just once.

But no matter how tempted he was, he couldn't do anything like Lao Qin. It would be too embarrassing for his elders!

Looking at Yang Xiaotao, Mr. Zhang had more approval in his expression. He thought that the new rolling mill would definitely be better than the one that Lao Qin had snatched, and he was no longer so anxious.

If the quality of both parties is the same, then the competition will naturally be speed and time.

But with a better rolling mill, it can do better, and the speed is not important at all!

Thinking of this, Mr. Zhang asked in a gentle manner, "How many days will this new rolling mill be used?"

Yang Xiaotao shook his head after hearing this, "I don't know that either."

Several people were confused.

Yang Xiaotao explained, "This new rolling mill requires higher precision and technology than a three-roll rolling mill. The requirements for machine tools and workers' technical requirements are more than those of a three-roll rolling mill. Therefore, it is relatively difficult to manufacture." some."

Everyone knows what Yang Xiaotao said, just like a machine tool, the better it is, the harder it is to make it.

After several people listened, Liu Huaimin and Yang Youning didn't say anything. They had even made machine tools like Morning Star, so why were they afraid of a small steel rolling mill?
It's nothing more than a waste of time and energy, and it's nothing to the machine shop.

But for Zhang Lao and others, although time is no longer tight, they are not very rich either.

"We are in urgent need of a steel rolling mill, and a rolling mill that can be used for finishing."

Mr. Zhang did not urge Yang Xiaotao to give a specific time, but he stated his needs.

The implication is that the faster, the better.

Director Zheng on the side also spoke.

"Xiao Tao, think of a way. If it weren't for an emergency this time, Chief Qin wouldn't have come at night, and we wouldn't have come early in the morning."

"I really can't afford to delay it!"

Director Zheng knows his own affairs.

Although the aircraft research in the Northeast is on the right track and the alliance's MiG-19 has been successfully imitated, this imitation is not without problems.

First, there are many hidden dangers.

Especially for the engine, firstly, the alliance did not give it sincerely, and secondly, the domestic basic materials were not up to standard, resulting in many engine failures, especially the fracture of the turbine shaft, which was the most serious, causing many accidents. For this reason, Two outstanding comrades were sacrificed.

Furthermore, after an aircraft based on the MiG-19 is copied, it will be difficult to surpass the prototype in terms of performance, and it is likely to fall behind the world's mainstream.

Especially now that the main equipment of the alliance is the better MiG-21, the gap is clear at a glance.

Now that the situation on both sides is unclear, some things need to be prepared for a rainy day.

Therefore, superiors requested the development of better engines and better aircraft.

The cooperation between their Third Machinery Department and the Logistics Department is the product of the urgent needs of their superiors.

"I can help with this."

"But, I can't guarantee the specific time!"

Yang Xiaotao thought for a moment and then agreed. After all, he had to personally master the manufacturing of many parts and sum up his experience.

Hearing that Yang Xiaotao agreed and took action himself, a smile appeared on Mr. Zhang's face.

Director Zheng patted his legs and said with a smile, "As long as you help, I have confidence in you."

Yang Xiaotao also smiled.

When Mr. Zhang saw Yang Xiaotao asking for help, he then said, "If you have any difficulties, please ask. If you have any needs, as long as we can help, we will definitely satisfy you!"

Yang Xiaotao shook his head, "It's hard to say now. If we really encounter difficulties, we will definitely not be polite!"

Several people reached a cooperation, and Yang Xiaotao then went to the R&D Department to gather everyone to get started.

After a while. R&D Department, Conference Room.

At this time, all the staff from the R&D department of the machinery factory arrived, filling the entire conference room.

Everyone looked at the design drawings assigned to them and looked at each other in confusion.

A few days ago, they were thinking about how to build a four-roller rolling mill. They were still looking for research directions these two days, but Mr. Yang quietly took out the design drawings.

It’s really…

Zhang Guanyu, Liu Daming and others looked at each other, and they all had a ridiculous idea.

If Yang Xiaotao doesn't design a three-roller rolling mill, it's not because he doesn't know how to do it, but because he doesn't have time to design it.

In other words, in Yang Xiaotao's eyes, the three-roller rolling mill is nothing at all.

Although it was a bit of a blow to his self-confidence, after being tempered by Yang Xiaotao's achievements, he was no longer so glass-hearted.

Yang Xiaotao looked at everyone's appearance and knew that his progress was a bit fast.

If the previous research methods were followed, he would give the R&D Department time to research and design and give them the opportunity to grow.

In this way, the people in the R&D Department have indeed been trained and their abilities have been greatly improved.

The design of the last three-roll rolling mill is the embodiment of the results.

But this time, if Mr. Zhang and the others hadn't rushed to find him, he would have really wanted to follow the steps.

On the side, Mr. Zhang and Director Zheng, accompanied by Yang Youning, watched the scene.

As for Liu Huaimin, he had already gone home to catch up on his sleep.

"This is your research and development office?"

Seeing the room full of people working in an orderly manner, and the sound of discussions coming from time to time, Mr. Zhang was surprised and a little envious at the same time.

That's right, it's just envy.

Although he has many research departments under him, there are also many people involved in research.

But what he felt here was more of a vigorous passion.

"Chief. This is our R&D department."

Yang Youning said with pride, "In recent years, we have put college students, talents, and special technical personnel here."

"If you say the most important part of the machinery factory is, it must be the R&D department!"

Yang Youning said it categorically and without hesitation.

Zhang Lao nodded silently after hearing this. With the endless research capabilities of the current machinery factory, it would be impossible to do it without a strong R&D team.

"Our R&D department is divided into three groups: R&D department, technology department and logistics department. Later, we added a security department, which is responsible for the protection of data security..."

"The ones here now are the R&D and technical teams."

"Look! The people on the left here holding the drawings and studying them carefully are the people from the R&D Department."

"Those on the right, those who seem to have nothing to do are the technical team. Of course, if they have nothing to do now, they will be busy later!"

Yang Youning felt that it was uncomfortable to sit down and have nothing to say, so he introduced the structure of the R&D department, during which he often helped Yang Xiaotao to say good things.

However, Zhang Lao noticed that among the clearly differentiated people on the left and right, there were more young people on the left, and more older people on the right.

It can be seen that R&D and technology still have age requirements, especially the technical group that focuses on personal experience.

On the other side, after the data and drawings were distributed, Yang Xiaotao began to arrange the work.

"Director Zhang, please make arrangements with others and we will start work as soon as possible."

"Everyone should also take a look at what materials to use if you want to meet the design coefficient requirements. Make statistics and start as soon as possible."

Zhang Guanyu nodded in agreement, this kind of thing is something he is used to.

"Team Leader Liu!"

Yang Xiaotao looked at Liu Daming on the side.

"Mr. Yang!"

"How is the research on the special thread that Lao Guo did last time?"

Liu Daming scratched his head, "Mr. Yang, this special screw experiment has indeed greatly increased the stability of the machine tool."

“Now we have these screws in special places!”

"But, there is a little problem with the production of this screw."

"what is the problem?"

The two people's questions quickly attracted the attention of the people around them.

Especially Mr. Zhang and Director Zheng vaguely heard something special.

Liu Daming took out a screw from the table, "Mr. Yang, look!"

"These are the screws we made in the early stage. Although we made some according to Lao Guo's description, the accuracy is difficult to control."

Yang Xiaotao took the screw. At first glance, there was nothing wrong with it. But if you look closely, you will find that the threads on the screw are broken, discontinuous, and even uneven.

"This is, the knife can't do it?"

Yang Xiaotao looked at it for a while and discovered the cause of the problem.

Liu Daming nodded.

"We used Venus to process this. We can't guarantee the accuracy with ordinary machine tools."

"But even so, what Daystar made is not perfect. There are still problems."

"Then use better machine tools and better knives!"

Yang Xiaotao replied without thinking, "If Morning Star doesn't work, then use Shining Morning Star. If that doesn't work, use Morning Star!"

After Yang Xiaotao finished speaking, Liu Daming opened his mouth, a little surprised.

In his opinion, it is just a small screw. If it is made with such a good machine tool, it is not killing a chicken with a knife.

And every time the machine tool is running, it is a loss for the turning tool.

"It's not worth wearing out your knife just for a few screws!"

(End of this chapter)