Scholars in the courtyard.

Chapter 1661: The First Shot of the New Year

In the workshop, as Yang Xiaotao announced the mission plan, everyone immediately became excited.

As for what a turbojet engine is, how to make it, they never thought about it.

Perhaps many workers in the workshop don’t know about it, and even some old workers have never come into contact with it.

The diesel engines they come into contact with most are those produced in factories.

However, in their minds, as long as there are drawings, as long as they are told what to do and required to what extent, that's enough.

They are not afraid of difficult tasks, what they are afraid of is having no tasks.

As for whether the aircraft engine is difficult or not, there is no need to say more.

They are not ordinary workers. Everyone here is an elite in the workshop and naturally knows the difficulty of working on aircraft engines.

Moreover, Huang Degong knew even more.

Why did the machinery factory make tricycles last time? It was because the superiors had new tasks and couldn’t take care of them, so they threw it to the machinery factory.

And that new mission was to produce aircraft engines.

That is, a turbojet engine.

But now it’s been a year, is there any news?
No.

This shows that the other party has not yet succeeded in their research.

And now, Yang Xiaotao wants to establish this project, what does that mean?
This means that their machinery factory wants to compete for the first place.

Their first workshop is about to become famous again!
As for whether their machinery factory can research it, is there any need to say more?

They have Mr. Yang!

This is the best engineer in the machinery factory and even in the entire city!

As for whether they have the ability to do it, is there any need to say it?

They have Mr. Yang!

This is the best eighth-level fitter in the machinery factory and even in the entire country!
As long as Yang Xiaotao is there, they have the confidence.

Anyway, Huang Degong was full of confidence.

Anyway, the people behind me are not afraid of big trouble.

Anyway, since Yang Xiaotao said he was going to do it, they just followed him.

"Stop talking, this matter hasn't been finalized yet, don't go out and talk nonsense!"

Huang Degong suppressed his inner excitement, then glanced at the people around him and gave a serious reminder.

Several people nodded one after another. Just looking at their excitement, they wanted to run out immediately and shout a few times to show off.

Huang Degong turned around and his expression changed immediately.

"Boss Yang, what should we do now?"

Seeing the slight expectation in Huang Degong's proud expression, Yang Xiaotao suddenly shook his head with a serious expression.

"It's easy!"

"Practice your skills first!"

When everyone heard Yang Xiaotao say this, their faces changed immediately.

Yang Xiaotao ignored the looks of the crowd and spoke to them face to face.

"You have been producing rice cookers. To be honest, the technical skills required of the workers are not high."

"Compared to other workshops, you don't get many opportunities to exercise."

After Yang Xiaotao finished speaking, Huang Degong looked solemn. The others were shocked and looked at each other in surprise.

If Yang Xiaotao hadn't pointed this out now, they might have suffered losses and lost face before realizing the gap.

Huang Degong knew clearly that what Yang Xiaotao said was right.

Normally everyone does the same job and doesn't notice these things.

But if we really compare them, not to mention the second workshop that specializes in producing machine tools, even the one that produces engines cannot compare with it.

"This kind of engine requires precious alloys, and we have no room for waste."

Seeing that everyone looked serious, Yang Xiaotao spoke again.

“In addition, the requirements for technical accuracy will be more stringent!”

“Even the difficulty of manufacturing is not worse than that of Morningstar Machine Tools.”

"You know what I mean."

Yang Xiaotao stood aside and looked at them quietly.

Huhu
Huang Degong took a deep breath. He finally understood why Yang Xiaotao sent the Morning Star engine he produced to him.

The pressure is huge.

But they had no way out.

They are all from the same factory. What other workshops can produce, they can also do.

"Mr. Yang, thank you for choosing us!"

Huang Degong looked serious, with a determined look in his eyes.

"If you trust us, then our entire workshop will never embarrass you!"

As soon as the words fell, the people around immediately shouted.

"Yes. We are a workshop."

"Our technology cannot fall behind!"

"Boss Yang, leave it to us. We will never embarrass you!"

"in those days…"

Everyone shouted one by one, expressing their inner will to fight.

Yang Xiaotao was happy to hear this.

"You have confidence and fighting spirit, which is great."

"I still say the same thing. Since I chose you, I believe you have the potential!"

Yang Xiaotao looked around at everyone and said, "This is the first tough battle for our machinery factory to become a direct subsidiary of the headquarters!"

“It’s also the first shot of the year!”

"Whether we can fight well and whether we can fight brilliantly depends on us!"

Yang Xiaotao encouraged everyone, "I hope this honor can be in the first workshop and in the memorial hall, and we can have a new chapter."

Clap, clap, clap! Huang Degong clapped his hands excitedly, and everyone also made up their minds that during this period of time, they had to be ruthless!
"After these machine tools are installed, you can take people to familiarize themselves with them. You can also find some difficult machines to produce and practice your skills."

"Also, the workers' skills need to be improved as quickly as possible. Old Huang, you have to keep an eye on this!"

"Of course, the technical team of the R&D department will also help you, so don't feel too stressed."

Yang Xiaotao patted Huang Degong on the shoulder, then glanced at the workshop and walked towards the office.

Looking at Yang Xiaotao's leaving back, Huang Degong took a deep breath and then turned around.

"Everyone heard it clearly, right?"

"This time, it's a dragon or a worm, it's in our hands."

Huang Degong's eyes suddenly became sharp.

"Starting today, corresponding component tasks will be assigned according to current job levels."

"Whoever can't do it well, who has degraded, whose skills are no longer good, must practice for me!"

"If you still can't meet the standards before the start of Mr. Yang's plan, don't blame me for demoting you!"

After Huang Degong finished speaking, everyone gasped.

Demotion!

Demotion!

This has never happened before.

But when they saw Huang Degong's expression, they knew that this time the director was not joking and was serious.

After leaving a workshop, Yang Xiaotao returned to the office.

Sitting at the desk, I picked up the enamel pot on the table, the water in it was still warm.

He glanced at Lou Xiao'e who was getting into the mood, then withdrew his gaze.

He took a sip of water and then put the jar aside.

Then focus on the current work.

As for other things, we can only deal with them as they come.

After all, there are still more than ten years to go.

What he needs during this period is stability.

Taking out two design drawings from the drawer, spreading them on the table, Yang Xiaotao began to study them.

Just as Huang Degong said, as long as Yang Xiaotao is there, the engine will not be a problem.

Yang Xiaotao also wanted to say that as long as the system is there, the engine will not be a problem.

The last time Yang Xiaotao upgraded to level six mechanical mastery, the system rewarded him with a complete set of turbine engine design drawings.

Originally, Yang Xiaotao hadn't planned to take it out so quickly.

But after some consideration, I realized that now is the best time to do this.

Firstly, the Red Star Machinery Factory became a department directly under the headquarters, so they couldn't just rest on their laurels; they had to come up with something eye-catching to shut up those with ulterior motives.

This will also reduce the pressure on the leaders and the machinery factory.

Secondly, the machinery factory has distributed some work tasks, like the rice cookers in workshop one and the air conditioners in workshop five. The freed-up manpower cannot be wasted and also needs to be arranged.

The last one is also the most important one.

That was during the Chinese New Year, when Yang Xiaotao was sorting out his findings, he discovered that the turbine engine design drawings given by the system were effective.

This effectiveness does not mean that the drawings provided by the system will disappear.

But the engine on this drawing will become obsolete.

The drawings awarded by the system are for the AL-21 engine, an important turbojet engine developed by the Union Lyulka Engine Design Bureau based on the AL-7.

According to the system, the development of this engine was proposed in the 60s, and it may not take long before preparations for development begin.

Although it will not go into production until around 70, if Yang Xiaotao takes it out by then, wouldn't that be plagiarism?

Not to mention the attention it has attracted from the alliance, even people in the country will start to wonder if you have something going on with the alliance.

At that time, I couldn't say that I had this blueprint ten years ago.

This is even harder to explain.

Therefore, it is better to bring it out earlier, so that I can stand up and shout to the alliance, "You are shameless and plagiarized my ideas."

It was precisely because of the above three points that Yang Xiaotao made up his mind to take out the drawings of this engine and make a big splash!
Of course, this kind of engine cannot be made just by having a blueprint, and Yang Xiaotao also needs to inquire about the progress of domestic engines.

So when he took his wife back to her parents' home on the third day of the first lunar month, he pretended to ask Ran's father about the Third Ministry of Machine Building's research on engines.

Father Ran didn't know much, but he still heard some information from Director Zheng.

It was also at that time that Yang Xiaotao learned that the aircraft that was currently being researched in the country was the Baye that came out later.

The engine used is still under development.

The main object of imitation is the P-21 turbojet engine of the MiG-13 aircraft supported by the alliance.

Yang Xiaotao is not very clear about this engine.

But he has a basic common sense, that is, the more research and development and improvements are made, the better it will be.

The P21 of the MiG-13 has been produced now, and this AL21 is still under development. Although there is a possibility of failure, can the system reward a failed product?

Therefore, Yang Xiaotao is certain that the engine he has is definitely better than the P13.

It just so happened that the country was going to develop a new type of engine, and Yang Xiaotao knew that it was impossible to ask others to stop and start his own project, but he could take advantage of the favorable conditions.

It just so happens that when you are doing research, you need the support of various domestic industrial sectors, so the materials and technology must be prepared.

Then I'll give it a try, no problem.

Anyway, the machine is turned on. It's production, and it shouldn't be difficult to help us process one.

With all the above, Yang Xiaotao focused his attention on the research of turbine engines.

As for other machine tools and rolling mills, there are naturally other people to do them.

As the chief designer, he has to do something different.

Otherwise, how can he demonstrate his ability?
As he thought about it, his eyes fell on the drawing in his hand.

The system provides a lot of drawings, and not only are there a lot of them, but the data on them is also very accurate. Even some special materials are marked. It is simply a perfect service.

Of course, even if the drawings are given, Yang Xiaotao still needs to understand them thoroughly.

The two drawings in front of me are of turbine blades. Even for such a simple thing, the size, curvature, hardness, weight are described in detail on two sheets of paper...

This pile of data not only reveals the requirements for processing technology, but also the rigid regulations on materials.

Sighing in his heart, Yang Xiaotao picked up a pen and paper to write down the results while verifying the calculations.