Scholars in the courtyard.

Chapter 239
National property is more important than Mount Tai.

This is not like what those later said. In this era, there are countless martyrs who sacrificed their lives to defend national property.

This is an era when national interests are higher than individual lives.

Yang Xiaotao is aware of Xu Yuanshan's concerns, even a broken machine is a precious asset.

"Uncle, this machine has been stored in the warehouse for several years, is it going to be stored for a few more years?"

"Uncle, we have an old saying that it is better to ask for yourself than to ask for others! Why don't we take the initiative?"

Xu Yuanshan was startled.

It is better to ask for others than to ask for oneself!
His eyes widened, staring at Yang Xiaotao.

"How sure are you!"

Yang Xiaotao took a deep breath, when Xu Yuanshan asked this sentence, it already represented the inner tendency.

Asking now is just asking for a bottom line.

"I haven't seen the machine yet, but I have been researching it for the past few days, and I am [-]% sure."

"If you can see the machine, study it, at least [-]%!"

Xu Yuanshan stared at Yang Xiaotao closely, he didn't expect Yang Xiaotao to be so sure.

You know, when the machine was damaged, the rolling mill dispatched many engineers from Sijiu City, many of whom had seen it and were scratching their heads about the rolling machine.

It's not that they dare not dismantle it, but that they are not sure about dismantling it. They are afraid that foreign experts will find oil heads and blackmail them. They cannot bear the responsibility.

"You have to be clear, this machine can't be repaired after dismantling, but you have to bear the responsibility!"

Xu Yuanshan was still a little undecided, even if he was carrying this matter, when the board fell, Yang Xiaotao would also be affected.

He didn't want to see Yang Xiaotao being hit at such a young age.

"I am clear!"

Yang Xiaotao nodded.

The two were silent.

"Okay! I agree with this matter!"

"A dead horse is a living horse doctor. You are right. It is better to ask for help than to ask for yourself. This machine will be useless after a few years. It is better to use it!"

Xu Yuanshan crushed the cigarette butt, the sparks fell to the ground, and then waved to Yang Xiaotao, "Go!"

The two left the office and soon found Wang Guodong.

To explain the reason, Wang Guodong couldn't react with his mouth wide open.

"What are you doing in a daze, find someone who you can trust, keep this secret in advance, don't spread it out."

"Let me take care of the warehouse, and no one is allowed to go in."

Xu Yuanshan explained, Wang Guodong nodded quickly.

Yang Xiaotao knew that this was to give him the bottom line, even if he couldn't fix it well, as long as the matter was not exposed, it would be fine.

Yang Xiaotao took a deep breath and secretly made up his mind that he must succeed.

"Xiaotao, you make up your mind, who to ask?"

Wang Guodong turned his head quickly, and let Yang Shitou decide for himself.

Yang Xiaotao pondered for a moment, then said, "Zhou Peng!"

Wang Guodong was not surprised when he heard this. This person had a good relationship with Yang Xiaotao before, and he was also a member of the factory guard team.

Adding a third-level fitter will not delay normal production.

"Okay, I'll call someone!"

Wang Guodong was about to leave, but was stopped by Xu Yuanshan again.

"It is said to assist Yang Xiaotao in processing high-precision workpieces."

"I know."

Wang Guodong left, and Xu Yuanshan led Yang Xiaotao deep into the factory.

Soon, they came to a remote factory building, and there was a person from the security department patrolling outside the door.

Seeing Xu Yuanshan coming, that person hurriedly stepped forward to inquire.

Xu Yuanshan waved his hand, but that person didn't dare to ask more questions, he stayed away from here.

crunch
The door was pushed open, but the expected dust did not appear. After the two entered, Yang Xiaotao reassured that it was very clean inside.

Someone obviously cleaned it.

It also shows how seriously these damaged machines are taken.

The two walked into the warehouse, where there were seven or eight machines at a glance, most of them were rolling mills, and there were two other machines.

Xu Yuanshan led Yang Xiaotao to a corner and looked at the machine in front of him.

There are still traces of flames burning on this steel rolling machine. From the outside, there is nothing wrong with it, but the inside is definitely not.

"This was rescued by your father and others. Unfortunately, it was burned badly and hit again!"

Xu Yuanshan touched the cold steel with emotion.

Yang Xiaotao also looked at the rolling mill, feeling a sudden pang in his heart.

"Except for this one, all the rest have different mechanical failures. The people sent from above didn't find the problem, so they just threw it here."

Xu Yuanshan pointed to the machines next to him, and then said, "Just watch these two machines, don't move the others."

Yang Xiaotao nodded, knowing that Xu Yuanshan should not be in charge of other matters, and he didn't want to cause trouble for him.

After the two had a conversation, Yang Xiaotao began to look at the rolling mill in front of him.

At this time, footsteps came from outside, and Wang Guodong led Zhou Peng to come, but along with him was Section Chief Zhao from the Security Section.

Xu Yuanshan frowned, but it was clear that someone from the security department must have reported it.

Now that he encountered it, he didn't intend to hide it.

"Old Zhao, let's go out and talk."

Xu Yuanshan went out with his arms around Section Chief Zhao's shoulders, leaving Wang Guodong and the others behind.

"Brother Tao!"

Zhou Peng was a little puzzled, he was called out after he did a good job in the workshop, and he felt confident when he met Yang Xiaotao.

Yang Xiaotao nodded, and then did not tell Zhou Peng in detail, but just told him that he needed his help for work.

Wang Guodong also warned Zhou Peng to listen to Yang Xiaotao in everything.

Zhou Peng nodded.

Xu Yuanshan and Section Chief Zhao walked in again. Section Chief Zhao looked at Yang Xiaotao and nodded slightly.

"I will ask Wang Hao to come over and look at this area, and make sure no one will disturb you."

Wang Hao was Director Wang last time, and Yang Xiaotao had some impressions.

"Okay, let's go and leave this place to him."

Xu Yuanshan pulled Section Chief Zhao to leave. The two of them have the same status, and they will attract attention no matter where they are.

The two left, but Wang Guodong stayed. He wanted to see what Yang Xiaotao did, and to find out for himself.

Yang Xiaotao began to prepare.

Of the two rolling mills, Yang Xiaotao did not choose the one that was burned, but went to the one with mechanical failure.

If you want to get the results as quickly as possible, it will obviously take more time for the burnt circuit.

On the contrary, after understanding the steel rolling machine thoroughly, put on the glasses and find out the fault, the matter is relatively simple.

Yang Xiaotao began to explore the structure of the rolling mill, and then picked up the tools nearby to disassemble it.

click
A screw was turned, and Wang Guodong, who was next to him, felt his heart skip a beat.

Afterwards, more and more screws were removed, each part was carefully pulled off by Yang Xiaotao, and then put aside.

Sometimes, Yang Xiaotao had to watch carefully for a while, and Wang Guodong never let go of his concern.

It wasn't until the end of get off work that Yang Xiaotao stopped Zhou Peng and left the warehouse together as he watched half of the rolling mill being dismantled.

However, when leaving the warehouse, Yang Xiaotao marked the door.

Defenses can not do without!
The next morning, after work and dinner, Zhou Peng was brought over.

When I came, I ran into Wang Hao who was patrolling outside.

The two met and said hello, but they didn't say anything, tacit understanding.

When he came to the door and saw that the mark was still there, Yang Xiaotao went in and continued to dismantle the machine.

In the next few days, Yang Xiaotao finished his work in the morning and came to the warehouse with Zhou Peng to work in the afternoon.

Sometimes when Wang Guodong came back to have a look, Xu Yuanshan would pass by once or twice, but he didn't bother Yang Xiaotao.

However, the two of them looked at the quickly disassembled and cleaned rolling mill, their hearts felt as if they were being pinched by fists, and they dared not breathe.

In this way, at the end of the month, Yang Xiaotao was already familiar with the structure of this rolling mill.

I also thought about this matter simply, thinking that with mechanical proficiency, I can understand these machines with blueprints.

But in actual operation, it is different from the similar one.

Just like the parts in front of me, they are inconspicuous on the rolling mill, and even the drawings are just a few simple lines. When they can be disassembled, they are useless, and they can't be moved according to the drawings.

It wasn't until Yang Xiaotao used the malfunction to scan the glasses that he discovered that there was a linkage between this part of the workpiece and another piece, and he had to remove both pieces at the same time if he wanted to remove it.

If there is no one who understands this, it is estimated that it can only be disassembled violently.

Of course, the consequence is that it cannot be restored when assembled.

Even if the machine is not repaired, I don't know what went wrong.

As time progresses, it has come to the end of July.

After a few days, Yang Xiaotao became more and more familiar with the internal structure of the rolling mill. He even felt that the second-level mechanical proficiency became more and more proficient in these days. Just like the description in martial arts novels, the abilities in the body are fully Absorbed.

Great work!

This also benefited Yang Xiaotao a lot. As long as he has a thorough understanding of the structure of this rolling mill, other rolling mills are not a problem.

At this moment, Yang Xiaotao only felt refreshed and energetic.

Compared with Yang Xiaotao's self-consciousness, seeing Zhou Peng, who Yang Xiaotao became more and more familiar with, was a shock!
Ever since Yang Xiaotao took it apart for the first time, Zhou Peng was taken aback.

Fortunately, Deputy Director Xu and the director were together, and he thought it should be the task arranged by these two.

If he knew that it was Yang Xiaotao's initiative, he would probably be even more shocked.

Of course, Zhou Peng also learned a lot from Yang Xiaotao during this time, at least he had an understanding of how to disassemble it, which made him even more grateful to Yang Xiaotao.

If it weren't for Yang Xiaotao's strict attitude that he would not accept apprentices, he would have kowtowed to be a teacher long ago.

Well, it is estimated that there will be many such people.

"Why are you standing there? Bring the pliers!"

Zhou Peng, who was being born, was awakened by Yang Xiaotao, and Zhou Peng quickly handed over a pliers.

At this time, Yang Xiaotao put the notebook aside, took the pliers and started twisting the screws.

Here, is where the damage to the machine was caused.

With a click, a broken part was removed by Yang Xiaotao.

Yang Xiaotao took off his glasses and looked carefully.

The component in front of it is broken from the middle, and looking at the cracked interface, it is likely to be caused by an external force impact.

And in this part, it is not caused once or twice, it is likely to be accumulated irregular operations over time, and it will happen over time.

Yang Xiaotao took out the parts, searched inside the rolling mill for a while, and finally put together the complete parts.

"Brother Tao, what is this?"

"What else is there, bad parts!"

Yang Xiaotao didn't say much, and asked Zhou Peng to put the broken parts farther away.

"This thing is really not simple."

Looking at the pieces put together, Yang Xiaotao pondered, almost catching up to the seventh-level workpiece.

But these are trivial matters, and he can handle them by himself.

If the crux of the problem is found, this is considered to be more than half of the success.

As long as the parts are changed, the rolling mill is assembled again, and the task is completed.

But will Yang Xiaotao let go of this learning opportunity?
Finally had the opportunity to disassemble a machine for exercise, how could he not seize the opportunity?
So Yang Xiaotao continued to dismantle the work.

click
click
Parts were continuously removed and handed over to Zhou Peng for orderly placement.

At the same time, Yang Xiaotao wrote and drew in his notebook, recorded the specific location, and compared it with the drawings when he went back at night.

Ding Dong
A section of bronze board was pulled out, revealing the dense wiring inside.

Yang Xiaotao quickly put down the pliers, picked up the notebook and started recording.

The links of these circuits are much clearer and easier to remember than those on the drawings.

As long as these circuit boards and wires are thoroughly understood, it is not a problem to repair other rolling machines.

In this way, time passed and it was another busy day, Yang Xiaotao twisted his neck and left with Zhou Peng.

Behind them, a bunch of them were scattered on the ground. When you look closely, they are arranged in a circle in order from inside to outside, waiting to be reassembled.

(End of this chapter)