Director: The special effects are too expensive, so I had to make real shots

Chapter 44 "Pain" of domestic high-precision machine tools

Boss, his thing is so big!
After all, the Autobots standing in front of them were three or four meters tall, and the sense of oppression was simply too strong for a little girl.

No wonder Wen Ruohan screamed loudly just now.

At this time, she could only look up at the transformed Autobot. A car could actually transform into a human form, which had never appeared in Wen Ruohan's worldview.

Yes, in this parallel world, no matter whether it is a literary work or a sci-fi movie, there is no such concept that a car can be turned into an Autobot like this.

"It's so cool."

Wen Ruohan, a lovely girl, thought this was really cool.

Before the actual test, Xu Nuo was still a little worried. After all, there were some big or small problems in the previous small tests. Unexpectedly, today's overall deformation test was a smooth success.

"Guan Ju, the deformation test data of the mechanically modified car has been saved, and we will optimize it based on this data in the future."

Xu Nuo said to Guan Ju in a very happy mood.

Guan Ju: "The measured data has been saved."

Although the refitting and transformation of this old car has been successful, it is still the first version, which is a simplified version and does not have the detailed sense of car deformation and the strong sense of science fiction in the movie "Transformers".

But for ordinary people, such a deformable car is already enough science fiction.

Xu Nuo's current purpose of making this transforming car is only to realize the "real theme" of filming "Transformers". ".

Just like the previous movie "Terminator", Xu Nuo had to create an artificial intelligence before he could shoot "Terminator".

"System, my transforming car is done, so I can shoot "Transformers" next, right?"

Xu Nuo pulled out the system panel and asked.

[The film project "Transformers", the theme of the film: Transforming cars, has been realized, please host the filming of the film "Transformers" in accordance with the principle of real shooting. 】

really.

The system told Xu Nuo that he could shoot "Transformers" now, and he was relieved.

"Boss, this Autobot is so handsome."

Wen Ruohan looked around the transformed Autobot several times excitedly, and then came to Xu Nuo and said.

"Xiaowen, do you think ordinary people will like it if they see such a transformable car?"

Xu Nuo smiled and asked Wen Ruohan.

Because there is no setting in this parallel world where cars can transform into autobots, so Xu Nuo doesn't know if it will be popular.

After all, modifying and manufacturing a car that can transform into an Autobot requires a high threshold for electromechanical technology, programming technology, etc., and it costs a lot of money. It's not practical. Xu Nuo removed all the seats in the car during the modification, and it was filled with various mechanical transmission devices, so it's normal that such things have not appeared in this parallel world.

"Sure, I like a girl very much."

Wen Ruohan quickly nodded and replied.

Xu Nuo knew that assistant Wen Ruohan's aesthetics were not bad.

What's more, it's a girl, since even she likes this kind of cool transforming car, then ordinary netizens must like it too, right?

"Can it change back?"

Wen Ruohan suddenly asked curiously.

"of course can."

Xu Nuo walked to the computer and said to Guan Ju, "Guan Ju, prepare to restore the test."

Both the deformed programming and the restored programming were written by Xu Nuo. For Xu Nuo, who can write super AI, it is simply a matter of sprinkling water.

"Xiaowen, come here."

Xu Nuo called Wen Ruohan over again.

"Here comes the little flying stick."

Wen Ruohan ran over excitedly and asked, "Boss, what's the matter?"

"Come on, press this reset button, and it can change back into the car form again."

"Great."

Wen Ruohan couldn't wait to gear up for a long time, and thanked the boss for allowing him to have such a wave of car deformation experience today.

pat!

I saw that Wen Ruohan still pressed the restore button cautiously.

The mechanical autobots who were standing there, all parts began to restore under the collision and friction of the mechanical metal, the hydraulic device automatically retracted, the coupling started to operate, and every gear was constantly rotating.

Ka Ka Ka ~
zizizi~
However, just when the front of the car was gradually lifted, the door slant wings on the back were mechanically driven back, and the entire car body was slowly descending, gradually returning to its original appearance, when it suddenly fell halfway and stopped for a while.

"Ok?"

Xu Nuo frowned suddenly.

I knew how the first actual test could be so smooth.

"Guanju."

Xu Nuo called Guan Ju to ask him to check immediately what went wrong.

"Detecting."

zizi~
boom!
Suddenly, there may be a problem with a certain support structure. The body structure has been restored, and the front wheels have returned to their original positions. When it was slowly descending, the whole car suddenly jumped straight down.

This impact with the ground directly caused some body modification parts to jump out.

"what!"

Wen Ruohan shivered in fright, and took a few steps back: "I'm sorry boss, I broke it."

Xu Nuo was very calm, and said with a smile, "It has nothing to do with you."

Now that there is a problem, it is enough to solve the problem. Besides, I have completed the transformation of the Autobot and obtained the qualification to shoot "Transformers".

It’s just that some mistakes occurred in the restoration process, the problem is not big, and Xu Nuo can probably guess that it should be the hydraulic support device in a certain descent process, it may be a problem with the processing parts, or it may be a problem with the programming .

"But programming shouldn't be a problem."

Xu Nuo is still very confident about programming: "Guan Ju, first check the data of each component of the supporting structure, and then compare it with the original design data."

"Okay BOSS, I confirmed that there is no problem when I checked the programming just now. It may be that the components of the support structure have a certain deviation from the design data, which caused the restoration test to fail."

Guan Ju analyzed it.

Then Guan Ju began to compare the actual data of the manufactured parts with the design data again to see if there was any difference.

"Boss, what's going on? Is it broken?"

Wen Ruohan came forward and asked worriedly.

Xu Nuo pondered for a while, then turned to the right, and set his eyes on the CNC machine tool.

"Could it be because of it?" Xu Nuo said to himself.

I also silently analyzed it in my heart just now. Since there is no problem with the programming I wrote, then most likely there is a problem with the structural support link during the descent.

Many parts of the mechanical structure are actually processed by this CNC machine tool of Shenji Factory.

If all the processed parts are the same as the design data, then from a rigorous theory, there will be no problems such as the failure of the restoration just now, and the sudden loss of support of the supporting structure.

So the problem is likely to be that the precision of the parts processed by this CNC machine tool is not enough, and there is a deviation from the design data.

"Boss, the test and comparison data came out. The supporting structure has actual data of two components, which has a slight deviation from the design data. According to the analysis, it should be these two subtle deviations that caused the instability of the supporting structure when it descended, so the will fail to restore."

Guan Ju reported the result to his master.

"Sure enough, a tiny place can sometimes affect the big whole. Alas, the precision machining level of this CNC machine tool is still not enough."

Xu Nuo couldn't help sighing after hearing Guan Ju's report.

This goes back to the topic that Xu Nuo expressed emotion about before. The manufacturing level of domestic machine tools, especially high-end precision machine tools, is still too backward.

If you purchase an ultra-high-precision machine tool from a major overseas manufacturer, the processed parts will basically not have such problems as data deviation.

It's not that Xu Nuo doesn't look down on domestic machine tool manufacturers, but the level gap is there after all.

Shenji Factory is already one of the top group companies in China that manufactures machine tools, and the machine tools they manufacture still have such problems in terms of high precision.

Xu Nuo pondered, it seems that he has to do it himself to make the country rise in the field of high-tech machinery and equipment, catch up with and surpass the gringos.

If we do not develop ourselves in the fields of high-precision machine tools, high-precision scientific instruments, and mechanical equipment, some problems will easily arise.

For example, being manipulated.

For example, the procurement cost is too high.

It was because it was difficult to buy a foreign high-precision machine tool that He Feiyang chose the best Shenji factory in China, but even so, the machine tools of the Shenji factory were still not satisfactory.

This is also one of the main reasons why Shenji Factory is facing bankruptcy and reorganization.

"I don't know if we can obtain advanced high-precision mechanical manufacturing technology after filming "Transformers" this time."

Xu Nuo thought to himself.

After a while, Xu Nuo decided to try again with the machine tool from Shenji Factory, process two parts that had problems just now, and then test the deformation and restoration of the modified car again.

Because this kind of slight deviation from processing may be a matter of probability.

"Come on, Guan Ju, let's process those two parts with data deviations again."

Xu Nuo came to the machine tool in Shenji Factory and began to process parts.

About half an hour passed.

The parts of the two new support structures have been processed. This time, Guan Ju has repeatedly compared the data and confirmed that there is no data deviation, which is completely consistent with the design data.

The failure of the restoration just now should be regarded as a "sideshow". Later, Xu Nuo plans to edit the failure process into the modified car video, which will make the whole video more interesting.

After Xu Nuo replaced the two newly processed parts on the car, he checked the damage of other links caused by the fall just now, and then repaired it.

"Boss, are you not hungry?"

Seeing the boss busy doing these things, Wen Ruohan hurriedly asked.

It's time for dinner since I came here in the morning, but Wen Ruohan saw that the boss was still busy rebuilding his modified and deformed car, it was hard enough.

Gollum~
Good guy, it's okay if Wen Ruohan doesn't mention this, after all Xu Nuo can take care of these when he is immersed in the busyness, after mentioning this, he can clearly feel his stomach growling.

"It's more than one o'clock. I'm really hungry."

Xu Nuo looked at the time, then touched his stomach and said.

"Then boss, I'll buy you food."

After Wen Ruohan finished speaking, she turned around and rushed out of the garage. When she came here today, she saw a restaurant at a distance of more than 100 meters by the road outside the abandoned factory building.

Seeing that Wen Ruohan went to pack food for himself, Xu Nuo continued to work.

After checking again and again, Xu Nuo thought that there should be no problem this time, so he conducted the deformation and restoration test again.

as predicted.

The second deformation and restoration of this modified car was completed smoothly.

After the test was successful, it further proved that the problem of the failure of the restoration just now was caused by the machine tool of Shenji Factory. At the same time, Xu Nuo became more determined to make its own ultra-high-precision machine tool.

"The test went well this time, congratulations, boss."

Guan Ju congratulated the owner for successfully completing all the actual tests of the deformed car.

"OK, Guan Ju, please edit the recorded video. According to the modification process from the beginning, this process can be displayed through video acceleration, and then the actual test fails, and it is also cut in, and finally the transformation and restoration of the successful content , I will add a few more audio explanations."

Xu Nuo asked Guan Ju to edit the video for himself.

Because when Xu Nuo was manufacturing this mechanically modified and deformed car, the whole process was videotaped these days.

And the video to be edited is especially important for Xu Nuo's next series of operations!
(End of this chapter)