The Ominous Lord of the Skaven

Chapter 184

The milling cutter used to cut the internal thread, the shape is not much different from the screw.

At this time, the workers were extremely grateful that Ickert had brought such a complete set of industrial equipment, otherwise they would not be able to handle these knives by relying on territorial production alone.

All the raw materials have been annealed to facilitate machine processing, and then quenched and tempered after processing to improve hardness and toughness.

A drill press has also made holes in these panels.

The thread milling cutter only needs to descend into the prefabricated hole, and then rotate and cut close to the inner surface of the workpiece to complete the manufacturing work of the internal thread.

The workers adapted very quickly, milling out the first qualified part in less than a day.

"With screws and internal thread parts, our thing is finally useful!"

"But what's the use of such a thing?"

"This, I don't know either."

While the workers were delighted that the screws worked, they still had no idea what these parts were for.

"The combination of these two parts is the pitching mechanism used by the lord to improve the new artillery."

Lafayette put down the vernier caliper in his hand and explained to the workers.

Due to the adoption of the Ratman's industrial standard, the measuring tools are also purchased from the Ratman.

"The new artillery will completely abandon the backward wedge mechanism, and use the method of rotating the screw to raise and lower the muzzle.

Not only that, but we also need to produce the corresponding gear speed controller to ensure that when the screw is raised to the highest and lowest position, the close-up disc just rotates one circle. "

"Secret? Secret bit disk?"

The workers were a little dazed, and even the artillery representative Shu, who was familiar with the work, was stunned.

Upon seeing this, Lafayette immediately began to popularize science on the workers and rat people.

"The so-called cannon density is a very convenient thing. With this, as long as we can determine the distance from the target to the cannon, we can directly adjust the pitch angle according to the shooting table and shoot the cannon to the corresponding position!
According to the instructions of the lord, our territory is currently limited in capacity, so the artillery secret position only divides the circle into 360 equal parts,
It is said that in a remote place, the artillery positions are generally divided into 3600 equal parts! "

"so much!"

Although the workers don't have any mathematical concept of artillery density, the number 3600 is really bluffing.

Even if the best cook is asked to cut black bread, he may not be able to cut out 360 pieces, but he did not expect to cut up to [-] pieces in the future.
Lafayette silently observed the workers' reactions. In fact, although the craftsmen present were already familiar with machines and knives, they didn't know any of the mathematical principles behind industrial cutting.

He also realized that this is a major obstacle to the development of industrial talents. An excellent worker not only needs to work on the assembly line, but also needs to have certain knowledge.

Only in this way, more and more improved crafts and various innovative ideas will emerge in the territory.

This is also the core of Ickert's request for him to focus on primary education, and he wants to gradually raise the cognitive level of the territory to the level of industrial society.

For example, regarding the production process of qualified gears, in traditional production methods, most of the drawings drawn by craftsmen are three-dimensional.

Not to mention the inconvenience, just say that if this blueprint is sent to other craftsmen, there is a high probability that another person will not be able to make it.

The reason is that it has not been standardized in all aspects.

In the industrial age, as long as the processing instructions are issued, no matter the accuracy, size or specific processing methods, everything is clearly laid out, and workers with qualified knowledge can get started.

In fact, the Ministry of Industry has been engaged in experimental production for so long, and has only harvested two of the most precious treasures.

One is skilled workers, and the other is the processing instructions of the two parts.

Every time a part is completed, Virgil will follow the brief instructions drawn by Eckert to perfect his opinions, and make adjustments to the accuracy requirements according to the actual machine tool.

After all, it is still produced by the Ratman, and some places are still rough.

As long as the knowledge level of the workers is improved, all they need to do in the future is to send out the processing instructions, and the production line will start to move.

Thinking of this, Lafayette started to arrange new work tasks again, finished the screws and internal threaded parts, and the rest was to produce strong gears.

Before leaving, Ickert explained to him, and the processing of helical gears and axial gears also needs to be solved.

However, these tasks no longer need to be checked by Lafayette, just handed over to Virgil and Sirollman.

While Lafayette was practicing in the factory, he did not forget to learn the ratman knowledge translated by Ickert.

At present, Love Primary School lacks suitable teaching materials, so Shakespeare still focuses on teaching literacy and culture, and the overall mathematics level of the rat people is still quite poor.

When Lafayette passed the office of the Production and Construction Corps yesterday, he heard the voice of Genie secretly learning mathematics.

"1000-7 is equal to"

Lafayette choked with anger.

Sure enough, it is really an urgent matter to pay close attention to mathematics education.

Fortunately, the Ratmen have done research on this for a long time, and many engineering warlocks have systematically sorted out relevant mathematical knowledge according to the needs of industrial production.

When Ickert was translating, he also removed the big rat-man bragging nonsense, leaving only practical mathematical knowledge.

After earnestly studying and sorting out this knowledge, Lafayette combined with industrial production and added a lot of cases combining theory with practice in his mind.

This is how the first set of all-collar primary school students' educational fantasy has begun.

After obtaining the basic process of language teaching through Shakespeare, Lafayette's educational illusion has become more and more perfect.

Considering that there will be many rats to be taught in the future, Lafayette also had to reduce the configuration of the illusion.

The size of the map is only as big as a love education camp, and part of the farmland was intercepted along the way. This is what Ickert strongly demanded that "study and labor are inseparable".

The simulated things are also very limited, and everything is to save computing resources to the maximum and save mana consumption.

The approximate operating environment and running time have been determined, and it only needs to be decided by Eckert whether it is feasible or not.

In the following days, Lafayette was like a wife waiting for her husband to return. Every day, she would not fix the illusion, or look at the entrance of the village with a piece of dogtail grass in her mouth.

I don’t know how many days I have been looking forward to, but it can be regarded as looking forward to Ikett’s return.

When the expeditionary army left, it took a hundred jackals with it, as well as the sacks that had been scavenged from the whole collar, and these sacks were now full of spoils.

Aris, who was in charge of the contact, quickly settled the crowd and began to count the gains this time.

"Four hundred first-level magic crystals, 200 second-level magic crystals, 105 third-level magic crystals, ten fourth-level magic crystals! There are even three fifth-level magic crystals!
Master!Did you rob the territory along the way? "

"Ah? How do you know?"

Except for the unlucky Godelberg, Ickert also drove the murlocs to rob houses. It can be said that the potential competitors along the way were basically tricked by him.

"Master."

Aris said speechlessly, he knew that Master Ickert had a personality, but he didn't expect that he would have such a personality, and he would kill all the human territories along the way!
(End of this chapter)