Chapter 26 It's just a lithography machine
"That's right, your new boss is me!" He Zheng was not interested in making a fuss or anything. When he saw the members of the props team including Lao Cao again, he showed his identity very simply.

"What, why should we work for you!" A young member of the props team said unconvinced.

"From today onwards, I will pay your salary. If you have any objections, you can resign and leave. I have no objections!" He Zheng said, and the young man immediately shut his mouth.

Although the work of the wandering water polo crew is very hard, it is also a job that many props will never touch in their lifetime. After all, not any crew is willing to invest tens of millions to make a sci-fi movie, so unless He Zheng gives them The treatment is very bad, otherwise they are not willing to leave easily.

"Okay, our first job today is to transform all the remaining 1 sets of exoskeleton equipment into real exoskeleton equipment!" He Zheng immediately began to assign tasks.

In addition to leaving a member of the props team on the set to communicate with the crew at any time, reporting and solving the props needs of the crew, he pulled the rest of the people to the prop center of the Oriental Movie Metropolis, and started the production of the remaining four sets of exoskeleton armor. Modification work.

First of all, He Zheng himself will demonstrate it to everyone, because he has the experience of the first time, and He Zheng specially made a few more copies of materials.

Therefore, the entire modification work took half the time compared with the first time. From the start of work at 1:9 am to about 2:00 pm, the modification of a set of exoskeleton armor was directly completed.

The members of the original props group who were watching the whole process, and the employees of the serious company who have not yet fully registered at this time, stared at the young man in front of them dumbfounded.

In just a few hours, He Zheng showed them all your incredible manual skills.

Whether it is scribing, cutting, electric welding, wiring, grinding, filigree, arrangement of various mechanical components, as well as disassembly and assembly of some internal parts, all the actions are in Xu Yun's hands, and there is no mistake in the middle , without even a slight pause.

This set of heavy exoskeleton armor was flying up and down in He Zheng's hands. Many members of the props team hadn't understood what happened. Those motors and wires, as well as various transmission shaft gears, etc. He Zheng was stuffed into a set of exoskeleton armor.

Those who can join the wandering water polo props group are all the best in the industry. After all, the props demand of "Wandering Water Polo" is not something that ordinary props groups can do. Everyone on the scene has certain real skills .

As a result, they just watched He Zheng modify a set of exoskeleton armor with bare hands, and they completely fell in admiration of He Zheng. This feeling was like Zhang Wuji fighting Guangmingding. The onlookers couldn't even understand how Zhang Wuji performed his martial arts.

And He Zheng's unfathomable bare-handed operation ability is naturally mastered in the consciousness space, after all, he is a man who can rub out an entire lithography machine with his bare hands.

There are hundreds of servo motors in a lithography machine to allow the whole lithography machine to move each processing surface according to the demand.

Moreover, the precision of lithography machines is all at the nanometer level, which places extremely high requirements on transmission equipment such as servo motors. However, when He Zheng was able to rub out a lithography machine with his bare hands, he produced such a semi-finished exoskeleton armor. It's really not too difficult a thing.

However, this kind of exoskeleton armor is only a semi-finished product, which can help users save some energy, but if they want to achieve all kinds of functions required by a set of exoskeleton armor in an all-round way, this set is still insufficient. What I learned in the space was how to build a lithography machine, not how to build an exoskeleton armor.

In addition, this set of exoskeleton armor itself is not designed by He Zheng, but by Weta Studio in New Zealand, and the fundamental purpose of the design is not for practicality, but for good-looking when filming.

And the most important thing is that the material is difficult to withstand the pressure. This set is okay for filming in the crew, but once it is really put into practical use, without today's time, it will be broken in various ways.

So in He Zheng's opinion, this exoskeleton armor is still far from the real exoskeleton armor.

It is precisely because of this that He Zheng then very simply handed over the technology of transforming this exoskeleton armor to the members of the props team, and then he guided it from the sidelines.

As a result, He Zhengzhi completed the work in 5 hours. This was in the hands of some of the top prop makers in the country, but it took three days to barely modify the three exoskeleton armors and hand them over to the Used by the crew.

And after this experience, everyone is completely convinced by He Zheng. For these skilled people, if you want to get their full approval, you have to be either rich or capable, and He Zheng Having both, it is naturally within reach.

At the same time, the benefits of using these props to form the original team are also reflected.

These people were originally from the prop team of "Wandering Water Polo", and they knew all kinds of prop needs of the crew very well. He Zheng didn't need to bother at all, and He Zheng only needed to spend money to pay for the production materials of various props.

And soon, the members of the props team also discovered that, unlike Director Guo who had to pay for the budget for everything he did, He Zheng was quite generous, as long as the report required money, and it was a reasonable expense, He Zheng There will be almost no obstruction, and these expenses will be approved in the first place.

In fact, as far as the props team is concerned, their work is almost the same as before. They all work directly on the crew of "Wandering Water Polo", making various props and sets according to the requirements of the crew, but they spend money from the crew of "Wandering Water Polo". It became He Zheng himself.

It is precisely because of this that Guo Fan began to arrange the props completely according to his own ideas.For example, Director Guo originally had no money to buy space suits, nor did he have money to arrange the detailed scenery of the space station.

Therefore, in the original script, the role of the space station is only one point, that is, in the end, the father of the protagonist Liu Qi, Liu Peiqiang, woke up from a deep sleep, and then Liu Qi told Liu Peiqiang how to save the earth, so Liu Peiqiang went directly to the cockpit, at the last moment Sacrifice himself to detonate Jupiter while reconciling with his son.

The footage of the entire space station is only a few minutes. At the same time, although the moss is there, it is just a tool and has no impact on the plot.

And the whole scene is only the cockpit of the space station, but after receiving more financial support, Director Guo plans to add a scene of walking outside the space station.

In this case, part of the exterior and interior scenery of the space station, as well as a decent spacesuit and so on, are required.

Anyway, Guo Fan had a good time shooting, but He Zheng's wallet was unlucky. In less than half a month, another 600 million was spent.

But He Zheng didn't seem to care about it. Except that the props team encountered some technical problems and needed to consult the boss, He Zheng himself would stay in the prop center most of the time.

In addition to the studio rented by the "Wandering Water Polo" crew, He Zheng rented another workshop with extra money. At the same time, a large number of couriers were delivered to the workshop every day, and sometimes there were trucks pulling the workers. Tons of various materials were sent in, which made the new employees of these serious companies feel puzzled.

He Zheng didn't play with the secrecy either. If the employees had something to do, they could directly enter the workshop, and then they could see their boss, who was constantly busy, as if he was planning to make some equipment.

At the beginning, it was just a place of materials, but after half a month, I could already see the structure of a huge square device.

At the beginning, out of the scruples of not asking the boss more about things, the employees who happened to pass by did not dare to ask more questions. It was not until this thing gradually took shape that Lao Cao had the courage to ask, "Boss, what are you building?" ?”

"It's just a lithography machine!" He Zheng said with a smile as he wiped off the oil on his body.

(End of this chapter)

Tap the screen to use advanced tools Tip: You can use left and right keyboard keys to browse between chapters.

You'll Also Like