Return to the exciting era of 1999

Chapter 175 New Technology, New Craft, New Worker

"Beautiful, Master Gao, you can see that we need to make all kinds of equipment. Wait for how many reducers you use here, and the accountant will reimburse you for it!"

Looking at the many equipments on site, Ji Donglai was happier than anyone else. Some equipment is still being assembled, and the tooling and fixtures have been optimized by these people to make them more reasonable. The work station that originally required three people has been transformed by several people, and now only one is needed. People can do it.

And one person is more efficient, working faster than the original three.

The newly trained little welders now have no problem operating a station independently from assembly to welding, and it is really semi-automated.

Although the eighteen-pound sledgehammer is still indispensable, it is much less than before, Ji Donglai felt very happy.

"We have a few second-hand machine tool markets here. In two days, I plan to go there to find two lathes and come back to renovate them. They are safe, and they are basically the price of scrap iron! Some factories also sell them to outsiders, and the boss knows his way Guang, pay attention too!"

"In a few days, I will ask He Hua to look for the former workers here to see if we can also buy something. To be honest, the factory still needs to have equipment, otherwise it will not work at all! The flange rolling machine over there can be fixed the day after tomorrow!"

"I have already asked them to start turning the wheels on the processing side. After they come up, we no longer need to cut the flange of the flue. This alone can save a Xiali car a year!"

Holding a blueprint, Gao Gao He pointed it to Ji Donglai to check, it was a non-standard machine.

This was all researched by He and his group in the high school when they were in the factory, and Ji Donglian couldn't help but feel slightly moved when he saw it in his eyes.

"Master Gao, can this roll channel steel?"

Looking at the various wheels on the drawings, Ji Dong looked at the gate of his factory.

"Yes, different mouth shapes of the wheels can roll different things, the principle is the same, you can roll whatever you want!"

Gao Gaohe took out several sub-drawings, on which there were drawings of various shapes, including angle iron, steel plates of various thicknesses, including round pipes and round steel.

"Then the economizer can be bent first and then welded, which can reduce the amount of welding and reduce the detection of leaks! Master Gao, you guys should do some research, I think it should be similar!"

My own economizer plan has a welding port for each cycle, so the welding volume is very large. Once it is changed to this long-distance bending, as long as the section deformation of the turning place is not too large and does not cause too much cycle resistance, Basically not a big problem.

"Okay, we'll do U-shaped bends, and I'll give them two more sets of wheels, Mr. Ji, you're amazing!"

Gao Gaohe has to admire that some people rely on hard work in the mechanical industry, such as themselves.Some people who are capable in this line of work rely on talent, such as Ji Donglai.

Looking at the bending machine, you can think of practical applications. This alone is destined to widen the gap with people of the same age.

"Okay, Master Gao, you must develop for us what equipment we can use here! Try to improve efficiency, and it happens that there are still a lot of economizers in this batch, so let's use this batch as an experiment, let's do it, something happened. I'm carrying it! Your bonus for developing the machine will be given to you at the end of this month!"

The essence of industry is efficiency. Whoever can increase the efficiency of the factory will be rewarded by Ji Donglai. To put it bluntly, Gao Gaohe is also a worker and lives on a wage.

Hearing Ji Donglai's reward, he was very happy, and immediately found the economizer drawing, calculated the size and put three wheels on the ordinary car.

In the afternoon, the U-shaped bend has been tested, and the result is very good, with only a slight deformation, and there is no other problem.

The next batch work is easy. Ji Donglai decisively replaced the 12-meter pipe with the [-]-meter pipe and Du Jingbiao, and then bent it at a fixed distance after returning.

Originally, the welding on Hehua's side was faster, and ten welds could be saved every two laps, so Hehua simply handed over all the welding to the young apprentices, and was responsible for guidance and education on his own side.

As for the blanking side, it is easier. The 12-meter pipe comes in and is used directly, and the cutting pipe is not used at all; so many welds are missing in the middle, and Sun Li's workload has been reduced by more than half.

During the interval between round tube bending, Gao Gaohe instructs the workers to roll the flange, two-step shaping on the press, drilling and then surface processing.After doing this, the circle cutting in the blanking process is cancelled, and this process alone can save 10 minutes, which is all cost.

The blanking waste in the middle is gone, and the surrounding waste is also saved.The whole cost is reduced by half.

The reel fell into the factory, and An Peng's processing fee was also saved. Ji Donglai was the happiest.

"Have you seen clearly that Ji Donglai is not recruiting any people?"

In the past few days, Ji Donglai's trucks can occasionally be seen delivering steel plates, but there are no rolls.

Dong Xilin originally hoped that the scene where Ji Donglai would come to beg his own people did not appear, so he could only take a few people to take a nap and wait on the spot. Without reels, there would be no welder's work. The board was cut in two and now all are transported 12 meters.

The last little money of Dong Xilin's gang was gone, which made Dong Xilin very hurt.

After all, without extra money, the wages of several people are only 600 yuan.

"Brother, I checked. They did not recruit workers there! But they use a lot of steel, and they seem to be doing work. Is it because they are superior? Why don't you ask Boss Ji again, and we will pay the original salary?" Capable, not low!"

This group of people all rely on handicrafts to make a living. If they don't do it for a long time, they will be unable to do anything in the future.

Besides, Ji Donglai's bonus and overtime pay are very tempting. Local private enterprises don't even talk about overtime. Free overtime is the norm.

There is no rest on Saturdays and Sundays, Ji Donglai is paid there.

Besides, Ji Donglai has a very good attitude towards this group of people, and many worrying jobs don’t need these people to come. The tooling and fixtures say that Ji Donglai can work for this group of people, and it is necessary to do temporary work outside. Do it yourself.

And the construction period can't be delayed at all, as long as everyone's total construction period is not delayed at Ji Donglai's side, they are a little regretful now.

"What's the rush? If you're too timid to become a general, we have to hold back, otherwise how can we raise wages?"

Dong Xilin was also beating drums in his heart at this time. It stands to reason that Ji Donglai must be very anxious for the lack of people, but now he has not moved at all.

Could it be that the other party was temporarily seconded from the foreigner's factory?If that's the case, the other party's side won't last long. After all, the working environment of the foreigner can't be compared with Ji Donglai's dirty and messy scene.

After making up his mind, Dong Xilin planned to stretch it a bit.

(End of this chapter)