Return to the exciting era of 1999

Chapter 178 Our money is really hard to earn...

"Scaffolding is needed inside, otherwise it will be too difficult to work! Make a folded one, like this!"

On the platform, Ji Donglai wiped the sweat from his forehead, and drew a simple folding platform on the platform, with the middle pin as the hinge.

Do the combined state at the end of the platform, otherwise the following work will be too strenuous.

"The pin shaft is 45, let the site do it right away, and send it in the afternoon!"

Ji Donglai handed over the sketch to Gao Gaohe, and the other party immediately drove back to the factory. The platform was completed in an afternoon, and in the evening Hehua worked overnight.

Grooves are made on both sides of the [-] thickness, and the bad point is [-] lengths, but the length must be opened to [-] lengths for repair, and there are slopes all around, so as to ensure that the deformation of the entire joint surface will not crack due to sudden changes.

"Mr. Ji, what kind of cutting do you use inside? An angle grinder?"

The internal platform was completed, and it was already dark, so Ji Donglai followed the whole process.

The external three-rod natural gas spray gun has been completed. It is 12 meters high and the wind is blowing. Ji Donglai specially made baffles on both sides of the damaged surface to ensure that the flame can be sprayed vertically to the metal surface. The flame needs to be preheated before welding. Three hours.

Whether it is cutting or repairing, this kind of internal closed environment must not be fired, unless you are looking for death, once the oxygen leaks, a spark can set a person on fire, and all internal grooves will eventually need to be polished and repaired by a corneal machine.

Of course, there are people who can take risks. It is a matter of probability that things like cutting with flames will cause accidents. Ji Dong looked at everyone around him and finally decided not to take risks.

"Don't worry, we use professional cutting equipment, that simple method, the time is too slow, and it's inaccurate! You'll find out later with us!"

Throughout the repair process, Ji Donglai was worried that other people would not cooperate well with Hehua, so he put on the goggles himself.Originally, He Hua was going to do it by himself, but Ji Dong was willing to come, because he was his precious pimple, a super welder.

Accompanied by Ji Donglai waving his hand, his subordinates slowly put down the hanging basket, Ji Donglai and Mr. Tian followed the passage to reach the dead point.

"Weld this straddle here, adjust the angle..."

Ji Donglai took a steel ruler and looked for the joint point on the curved surface, then drew a line on the joint surface, and welded the knife holder holder on both sides.

The reducer is equipped with a milling cutter, and Ji Donglai adjusts the cutter head to the 45-degree position.

"Mr. Ji, are you a magnetic drill?"

Looking at the strange organization under Ji Donglai, Mr. Tian's eyes were full of curiosity.

"The principle is similar, but there is a difference. We are installing a milling cutter, which also needs to be operated manually...Xiaolong, you can control the knife along this surface. Remember not to do too much at one time, and cut in circles! The next surface will be cut. a lot of……"

Pointing at the 45-degree position, Ji Donglai started the groove milling. After the joint surface was burned, the hardness was much harder than the surrounding metal. Ji Donglai slowly manipulated the cutter head.

When it reached the dead point in the middle, the cutter head obviously vibrated a few times, and the feed speed increased.

On the way back, Ji Donglai reversed and milled at 45 degrees. Gradually a smooth surface appeared in everyone's sight, and Ji Donglai handed it over to He Xiaolong.

"Didn't you see that Mr. Ji is so capable of doing things himself?"

Watching Ji Dong come to make samples, Mr. Tian's eyes were full of curiosity.

"Most of the technology in our factory is brought by Mr. Ji, and the process routes are basically made by Mr. Ji. We dare not hide our secrets from the boss..."

He Xiaolong lit a cigarette, put on his gloves, turned his head and said to Mr. Tian with a smile, Ji Donglai tapped his forehead.

"Talk too much, hurry up, don't you know that our super welder is waiting?"

Mr. Tian heard that many technologies in Ji Donglai's factory were formulated by Ji Donglai, and he was full of doubts, so he looked Ji Donglai up and down unconsciously.

"Don't be surprised, I come from a family of workers! My father is an eighth-level electrician who works outside, and my grandfather is also an eighth-level worker! After being trained by two eighth-level workers, I am at least a seventh-level worker!"

"So don't worry about our professionalism. We are a team, and no one is weak. You will know if we cooperate more in the future!"

One person works on the spot, two people observe the surrounding environment, and one person oversees the fluid valve. As for the electric appliance, Ji Donglai has also arranged for people now, so no omissions are allowed.

It took two hours to remove the defect surface. In fact, Ji Donglaiman could directly use an angle grinder to cut it hard. According to the methods of several old workers under Hehua, it can fully meet the requirements.

Ji Donglai must let Mr. Tian see that Ji Donglai's money is not easy to earn, otherwise the other party will not be reconciled. Hehua, who had a good rest in the middle of the night, entered the bottom to check the progress. Mr. Tian I was so sleepy I couldn't keep my eyes open.

"Mr. Tian, ​​why don't you go back to rest first, our repairs are not so fast here, it will take a few days, you can just come back when we are packing the project, don't worry if the project is handed over to us, you can also see It’s hard to make money at this level!”

Looking at Mr. Tian's snot coming out, Ji Donglai pretended to be very concerned.

"I'm sorry, my physique is really not as good as yours. I will report to you tomorrow with the boss. It's really not easy, it's hard work..."

Tightening his coat, Mr. Tian hurriedly asked the driver to drive him back to rest.

Ji Donglai waved his hands over there, and He Hua beckoned his companions to go down. After a while, there was the buzzing of the angle grinder inside.Inside the airtight tank, the sound was extremely ear-piercing. Even though several people had earplugs, the vibration was still choking.

Mr. Tian arrived at the scene around noon the next day, and Mr. Tian also came with Tan Xiumei.

"Hey, Mr. Tan is back? Give me a call and I'll pick you up at the airport!"

Looking at Tan Xiumei's big sunglasses, Ji Donglai got off the ladder with a big smile on his face, and Tan Xiumei took off his glasses and looked around.

"Okay, I took over such a big project, Ji Donglai didn't see that you are capable! Is this your new worker?"

Looking at so many new faces at the scene, Tan Xiumei looked around with a cold face. Ji Donglai knew what the other party was thinking, so it was no wonder that she started to take over the maintenance of this factory without passing the other party.

"I have to live, just test the team! The orders you send me are getting more and more difficult, I have to come to get training! Besides, there are more and more challenging orders now, so I have to get the team up first!"

"They found me because they couldn't send it out, and I don't like to take it! If it wasn't for your face, I wouldn't do it just to repair the reactor for such a small amount of money. Look at the pipeline over there." Is it? Acid-resistant pipe, it looks like money is good, but it is not easy to take!"

"That line..."

Facing the guide, Ji Donglai began to exaggerate the difficulty of the project, and Tan Xiumei's complexion improved.

(End of this chapter)