Return to the exciting era of 1999

Chapter 60
There is still some money left in my hand, my cousin can also squeeze out a little, and I have to give some advance payment for the product, right...

As for the raw material manufacturer, Ji Donglai is so strict, who dares to say a word?
Even if Ji Donglai doesn't give money and asks for raw materials with his own mouth, these raw material dealers have to give them all!Ji Donglai has already accumulated all the recipes, as for the equipment?Mother Ning Caiyun's original processing plant now has a lot of idle equipment waiting to be disposed of.

The matter of the house came to an end, and the rest should be busy with the college entrance examination and career, Ji Donglai thought carefully in his mind.

"I don't care about it, Donglai, I know you have a lot of things in your mind, I want a mobile phone case! You can figure it out, the price I give is high enough, I want a single copy, I will do wholesale for large quantities, and I will sell small quantities. Just sell retail! Your benefits are indispensable, I am waiting for the letter, anyway, I can tell grandpa and others about someone..."

"Okay, you are so good-looking, but why is your heart so vicious? The wine celebrity's face, money and people's hearts are all captured by you. How did aunt cultivate it?"

Wang Jue looked at Ji Donglai and fell silent, judging that Ji Donglai must have a solution.

After going through several incidents, Wang Jue now fully recognizes Ji Donglai's strength, and now he seems to regard Ji Donglai as Doraemon!If you can make a wish, you can make a wish, and it's up to Ji Donglai to see if it can come true.

"Donglai, I helped you with the demolition team last time, you have to help me this time, otherwise hehe..."

Seeing Ji Donglai's hesitation all the time, Wang Jue added fire, and Ji Donglai rolled his eyes.

In the end, he agreed to give the other party a try. In fact, Ji Donglai had already made a good plan.That night, Cao Ren's broken mold was taken to the Panasonic factory.

Lu Shipeng was on a business trip these days, and Ji Donglai happened to be watching all the factories.

Because Swell needed to catch up with the construction period, Ji Donglai sent the teacher who took care of the students directly to the old factory, changed into his work clothes, and began to check the mold situation himself.

There is no big problem with the mold from the outside, but when it is really installed on Panasonic’s large Two-dimensional, the deformation of the mold can be seen immediately.

"It has changed so much. Sandblasted the entire surface, then coated it with a layer, and then put a grinder on this side. Hey, it should be possible to directly change these cores to plug-in types!"

Ji Donglai clicked his tongue looking at the damage of the mold under the camera, and various maintenance plans floated through his mind.

According to the traditional process, the wear-resistant layer on the mold is directly knocked off, and then the whole is coated with a layer, and partly corrected in due course, and then another layer is coated.

In this way, it can not only ensure that the deformation of the mold can recover part of itself, but also ensure the minimum amount of correction.

Ji Donglai simulated the mold structure on the computer, and finally decided to change the mold structure, so that the core will be replaced directly in the future if the wear is too large.

"Open a set of molds for me, and then forge 120 for me. I will use them later!"

After deliberating various situations, Ji Donglai finally took the design drawings of the core to Lu Shipeng's processing factory and asked them to open a set of forging dies.

High-frequency heating, one-time stamping, and then surface finishing.

The master craftsman on site glanced at Ji Donglai's design drawings, and kept nodding his head. No matter in terms of processing or cost, Ji Donglai's craftsmanship is the best.

"This mold will process holes for me according to my design drawings. Remember not to polish the bottom position, and ream all the rest!"

Worried that the students would not understand, Ji Donglai brought the mold back to the processing factory again.

The one-piece cores were all processed and removed by milling machines, and the surface of the substrate was drilled according to the design drawings. Because there were few people, Ji Donglai asked the workers to put the molds on the bed and process them by themselves, and even the procedures were typed on the spot.

"Mr. Ji, how many years have you been doing this? We don't have many masters who can handle the knife alone on site. Most of them have worked for five or six years before they are sure to go to the processing center. It's not a good thing if this thing hits. !"

Looking at the processing center, Ji Donglai was simulating the processing route, and the jiggers were assembling. Several master craftsmen gathered around, with admiration in their eyes.

"My grandfather is a worker at the Jingshan Iron and Steel Plant. I grew up in the factory since I was a child. I know the basics. Of course, it's up to you if it's too difficult. It's ok. You can just watch the rest. Let them finish the processing. Clean me up, page me and I'll come and pull away!"

After the explanation, Ji Donglai rushed back to Hebei overnight without stopping, and asked Wang Jue to help connect the cables in the small courtyard by the way.

Buying an injection molding machine, the whole process went very smoothly.

Although the domestically produced SJ injection molding machine is not the most advanced in the market, it can still be used to make do with it. Ning Caiyun used to come from this factory, and many people know Ji Donglai.

If he wanted to buy equipment, Ji Donglai picked it at will, and looked at the parts on that equipment so he could take it off and replace it.

Originally, Ji Donglai wanted to buy equipment, but the leaders in the factory were hesitant, and Ji Donglai was also thinking over and over again, after all, the equipment was too old!In the end, Ji Donglai decided to lease the equipment, with an annual equipment usage fee of 3000 yuan.

The factory manager heard that if the equipment is leased, the ownership of the equipment is still in the factory, so it is not a violation. Even when the equipment is finally liquidated, the other party also said.

So according to the agreed price, Ji Donglai paid 6000 yuan for two sets of equipment, each of which was [-] yuan.In addition, there are still some workers in the factory who are doing maintenance and need to be paid, so Ji Donglai's matter went smoothly.

On the transportation side, Liu Yupeng asked Ji Donglai for a car with a phone call, and the drivers and friends of Liu Yupeng's parents loaded the car.

In this way, the next morning, Ji Donglai brought a few intern pupils with electric picks and appeared in the warehouse where the courtyard was purchased.

It is said that the warehouse is actually a simple partition from the boiler room, and its height is the same as that of the boiler room.Visually, at least eight meters away, the ground is all cement. Ji Donglai and a few students dug down a full [-] depths before they saw the mud.

"Lower the anchor bolts, just drop one of the ground wires, and dig a water pipe to this place. Cooling water is needed here. The cable ditch is separated from the water ditch. After I get the electricity, the driver, you drive the car in." Bar!"

Landing the equipment is a big job. It looks simple, but the anchor bolts must be firm, otherwise the equipment will be seriously deformed after long-term operation.

Raw material crushers, injection molding machines, another granulator that Ji Donglai relied on to pull back, and another kneader. Ji Donglai and that factory rented only crushers and injection molding machines.

Up to now, Ji Donglai really didn't have many tickets left, and he had to leave some money for the raw materials, so he could only adopt this strategy.

(End of this chapter)