Return to the exciting era of 1999

Chapter 84

The warehouse was full of rubber raw materials and scrap steel bars, and the newly recruited interns were cutting the steel bars as required. Seeing Ji Donglai, everyone greeted him.

"Brother Ji, the mold is still good, but isn't it a bit wasteful for us to use electric heating?"

Ding Aixing asked in a low voice as Ji Donglai was checking the steel wheel with iron pliers.

In Ding Aixing's traditional impression, heating these things is done with gas or coal.Ji Donglai still has coal burning here, why not just build a simple boiler over there, put the blower up, and put the iron bumps there.

Burning red steel bars is also a matter of minutes. Now that electric induction heating is used in this way, the efficiency has increased, but the cost has also increased.

The reading of the electric meter was like pulling it with a hand. After a long time, Ding Aixing was worried that Ji Donglai would not be able to bear the cost.

"We can try it in winter. Burning coal is easy to cause dissatisfaction among people around us. Once we are reported, we will be easily driven away! We are too small in the current situation. First of all, we have to survive!"

"The core of industry is nothing more than efficiency. Do you know that everything else is superfluous? In the future, if natural gas is connected here, we can pull a pipe over here, and then our cost will be reduced! Now that's it Do it, and make our people pay attention to safety!"

"Nine out of ten punches are perfect for stamping. We are all young. I don't want this to happen when you are not married, let alone I have no money to compensate you, understand?"

The large punching machine is a pair of big scissors, and anything can be pressed into cakes under it. Since the machine was rented, the most common thing Ji Dong said was safety.

Ji Donglai also had a headache for those vulcanizing machines, except for one refill machine, the rest were coal-fired ones, Ji Donglai would not want this crap if he had some money.

He is still short of money, otherwise Ji Donglai must have changed it.

Many things are easy to say, but not so easy to do.

Now Ji Donglai can only buy the rubber raw materials refined by others, and the cost is still relatively high. Only when he can handle everything from the source to the finished product in the later stage can Ji Donglai control the cost.

The price of the polyurethane A material obtained from the outside is not low now, but fortunately the other party is looking at Swell's face, otherwise no one would agree to provide Ji Donglai with the original refined A glue.

The other party can earn more by contracting labor and materials, and there is no need to worry about waste.

"Buzz!"

Lathe Lao Zhao also started working non-stop at this time, because Ji Donglai is doing fine blanking, the product shape consistency is very good, the clamping is very fast, the threaded inner hole is almost one cut, and occasionally there are two The knife is also a product defective.

"Leader, it's best to use CNC to make this thing. It only needs to be adjusted once, and it can be done in minutes. Our efficiency is average!"

Ji Donglai came over to check the size of the product, Lao Zhao also stopped his work and handed Ji Donglai a cigarette.

"Can you count the numbers?"

First, he lit a cigarette for Old Zhao, and Ji Donglai smacked his mouth.

"Yes, I used to do numerical control before I left that old factory, and taught my apprentices to kick me down!"

Talking about his previous work experience, Lao Zhao felt depressed.

In the past, Lao Zhao's boss was also a private boss. He seemed to be a nice person, and occasionally gave Lao Zhao some of the clothes he usually wore, which of course were leftovers from the boss.

Later, the boss brought his nephew over and asked Lao Zhao to take him with him.Old Zhao didn't doubt that he had him, but after the teaching, the boss immediately found a trivial matter and fired Old Zhao.

It is precisely because of this that Lao Zhao came to Jidong to work here, so he has always been a general worker, and he has never taught anyone how to do it.Of course, there are very few general workers who can learn it now.

"Okay, come with me!"

Ji Donglai didn't think too much about it, and directly brought Lao Zhao to the Panasonic Park. There was a row of machine tools in front of him, all CNC machine tools.

"Boss, this is good! Yamazaki Mazak, all hydraulic chucks, my efficiency can be increased by more than half..."

Looking at all the CNC machine tools, Lao Zhao's eyes lit up, as if he had returned to his apprenticeship, Ji Donglai nodded and called the monitor over here.

"From now on, the old master Zhao will lead you to the machine tools here, and you can do whatever you want. Don't feel any repulsion! If Manager Lu comes over, tell me that I arranged it!"

"Master Zhao, you can just give me some guidance here. Our construction period is relatively tight. Look at the arrangement. This is a long-term job! You can make up the program, and I can make it up. We can do it! The processing over there If you want to learn from the center, you can also come to me, it's all our own business!"

"I will recalculate your salary for you, according to the salary of the CNC! If you train the students in this workshop, I will give you the salary according to the director's salary! In short, I want output, and you will also be in charge of the machining workshop over there. , I'll count the money for you too!"

Ji Donglai treats workers like Lao Zhao who have tragic experiences differently, and tries not to let the other party care about him.

Old Zhao kept nodding his head. In the past, there was no salary for taking care of apprentices, but now Ji Donglai pays, which proves that he is a sensible person.

Three salaries, even when I leave in the future, I am willing in my heart.

"Boss, don't worry, there is one person who can't, I'll chop off my fingers! These children are not as dark as those people, we understand!"

In many cases, the ability to make money is much better than those bullshit promises, and Lao Zhao has started work every minute.

Ji Donglai asked Liu Yupeng to arrange a truck to pull the semi-finished wheels from the factory and machine them directly at the Panasonic Park.

With the CNC machining of the inner hole, the diameter tolerance is almost the same. Ji Donglai simply modified the center size of the forming mold, so that the positioning is easy to do.

On the second night, Ji Donglai started the molding of the guide wheel. With the vulcanizing machine slowly falling, the product was directly molded in 7 minutes.

"Okay, just follow this! Insert all the cavities, and hand over the removed pieces to Master Zhao, and let him continue to open the mold!"

This time the guide wheel mold Ji Donglai made all the plug-in cavities. After all, polyurethane is not all rubber, and the molding speed is much faster!
In addition, it is much faster to repair the mold in this way. The workers here are all young students with quick eyesight and quick hands, and the maintenance of the mold is beyond ordinary people.

One mold has 48 cavities, one mold takes 7 minutes, and the output is more than 1 per day.

Adhesive spraying, in the future, directly use a hollow polished rod to put all the skeletons in the center and put them in the yard. Gears are installed on the head, and the side is driven by a chain, driven by a reducer bought from the waste station.

(End of this chapter)