Era: Retired from the army at the beginning and returned home.

Chapter 155 Entering the Blind Spot

It is difficult to be a factory manager in the era of planned economy.

Difficult, not difficult.

If you have products, you don’t have to worry about sales, so there is no sales department. When you are a factory manager, you don’t need to think about sales, you only need to think about production volume.Can it be produced and how much it can produce.

There is no need for management experience. What departments are there and how many employees are in each department are not things that the factory manager considers.Many departments are not organized into one system. There are some things that the factory manager can intervene in, while others cannot.

Even the factory manager in this era is more of a service worker. If the workers are fed and have good benefits, they are actually a good factory manager.

Many people in the repair shop didn't mention it, but they all guessed that Luo Cheng would definitely be the factory manager in the future, but no one thought that he would be their factory manager.

Luo Cheng is also avoiding this question. In fact, he also wants to be the factory director, but his thinking is not on serving the workers, and his ideological consciousness is not so high.More purely because I think it may be very cool to be a factory manager, but I don't know how to do it.

Factory director Zhang, a sixth-level repairman can directly become the factory director, just because of his high skills, others obey him.

In other enterprises, because of the placement of a professional cadre, they may directly serve as factory directors.Even the higher-ups were downgraded. They used to be middle-level cadres in large factories, and they went directly to the factories below as factory directors.

No experience is required at all, and you don't need to know how to manage.

So when factory manager Zhang answered the phone and found Luo Cheng and told the higher-ups what he wanted, it took a long time for Luo Cheng to recover.

If this is the case, the production of cube cars is likely to be set in the auto repair shop from the very beginning, because the repair shop will definitely report to the local unit.The essence of the repair shop has not changed, and it will still repair vehicles for various local units, but because of the affiliation, it will affect the location of the cube car production and construction plant.

At the beginning, the local government chose to let the auto repair shop open in this place. It was a comprehensive consideration, and it should not be too remote. The main reason is that it is convenient for vehicle repairs in urban departments, but it should not be too central. The dense flow of people will make it difficult for vehicles to enter and exit.

Tomorrow, the cube car road inspection will be carried out. If the cube car factory is really built next to the repair shop, plus the repair shop will become a repair workshop of the car factory.In this initial production, it is entirely possible that there is no need to wait, and the manual production can be started directly.And there is another point that is the most critical.

The proportion of regular workers in the repair shop is not high. The main limitation is that there are not enough posts, one carrot for one hole.And if the cube depot replaces the repair shop, it will provide a lot of jobs. The department responsible for assembly alone can turn all the apprentices into regular workers.

The regular car repair workers in the factory should familiarize themselves with the manual production of cube cars in advance, and maybe they can be a workshop leader when the time comes.

Luo Cheng didn't chat with Director Zhang about this topic much. It's a bit awkward for them to talk about this topic at present, so it's better to let it be.

Now Wangcheng and the others have installed the base sprocket of the screw rod according to Luo Cheng's requirements. Just take a wheel to drive it, and the screw rod can be driven to rotate through the rotation of the sprocket wheel on the base. Above, forward rotation will increase, reverse rotation will decrease.

When the screw is welded to the pipe, it will drive the pipe to rise and fall together.But do not install engine to rely on power to operate at present.The things that have been done so far are nothing more than an extended jack.If you use an ordinary jack to pad a board, if someone steps on it, you can also lift you up manually.

Luo Cheng thought for a while, and now he is just making a model, and it seems that there is no need for a booster pump at all.When it is officially launched, if it is operated with a small horsepower engine, a booster pump is needed.Moreover, what is currently engaged in is the lifting form of a forklift, and this thing has disadvantages. If it is only for maintenance, that is, if the car can be driven, it can be directly driven on the pipe frame for lifting.

But for the repair of broken cars, it is convenient to do the column type lifting, and that is the split test hydraulic lifting.If there is no column, the repair shop has to dig the ground about ten centimeters to install the elevator, so that the lifting bracket can be level with the ground.

Wait~~~, Luo Cheng looked at the lifting frame that hadn't been installed with the engine in front of him, and then looked at the current workshop.Damn~~, Luo Cheng found himself in the blind spot again. According to the theory, the principle of the car repair lift is simple. Even if there is no hydraulic lift in this era, a spiral one is fine.

Even if it is really necessary to install and lift, it is not enough to make two large jacks and bury it underground. When the car drives up, it can be lifted and lowered manually.And why is there no elevator in the factory.

Luo Cheng realized that he was an idiot. Those repair shops in later generations who installed elevators all built houses with cement or floor tiles on the ground structure.And a lift in the later generations is not expensive, the ordinary five thousand to ten thousand, such a machine also seems to be classy.

But now repairing the car really needs a lift. If you work hard to build a lift, it’s better to ask two people to dig a small hole in the ground, just like the toilet squatting in the later generations.The car is driven on it, and people go to the pit to repair it.

For repair shops in cities in later generations, digging pits will destroy the ground structure. The shop may be rented, and you have to return it if you quit. The labor cost is not low.Installing a lift saves trouble and is compelling.At this time, what's the use of having a high-quality outfitted elevator, and you don't need to attract business, no matter how high your high-quality is, the repair price is the same.

Looking at the disassembled gearbox and jack parts on the ground, I feel that there is no need to build a lift model. Let's just make a forklift model.A forklift has a frame, so let's just make a fixed frame first.

I told Wangcheng to make a square frame according to the requirements, and still use the materials left over from last time to make it. The size must be able to fit the engine. In addition, like a car, the engine must have a water tank, a fuel tank, and a fixing frame. Definitely put those in there.

After commanding, Luo Chengcheng slipped away. Fortunately, he didn't tell Wang Cheng and others that he wanted to build an elevator at first.If it's an engine, a gearbox, and disassembly and assembly of various things, the final purpose is to replace what can be done with a pit.That would be a shame.

However, the elevator does not mean that it is useless, but it is not suitable for repairing cars at present. In the factory buildings with several floors in the future, in fact, the elevators are used to move things upstairs and downstairs. The installation of elevators is cheaper than elevators.It's just that the movie can automatically stop on the first floor with one click.The elevator is to keep pressing the switch.

Luo Cheng didn't plan to come to the factory in the afternoon. He wanted to take the drawn drawings and go to the rolling mill first, and then to the machinery factory.Let Wang Cheng and the others fix the fixed frame, so they don't have to wait for him in the afternoon, and they can go to their own affairs if they have something to do.

As for tomorrow's road inspection, Luo Cheng has to attend. As a designer, he must go.At that time, we still have to take photos and shake hands with many local leaders.A group photo of him shaking hands with provincial leaders can be hung in the factory.

(End of this chapter)