Era: Retired from the army at the beginning and returned home.

Chapter 165 The director of the rolling mill has a problem

Damn it, Luo Cheng felt that he was absolutely crazy, the engine was really untouchable.

Luo Cheng was in the room at this time, wearing a military overcoat, drawing and writing on a blueprint on the desk that he bought at the beginning with a few drawers missing, trying to understand it.

Beside the desk, there is a low-level four-cylinder gasoline engine fuel supply structure diagram, not only the diagram but also the text standard.

As an auto repair professional, Luo Cheng can easily understand the meaning of each component, such as the ignition switch, how the gasoline tank enters the fuel, but a single gasoline passes through more than a dozen small parts from entering to igniting, which repairman will not Come learn this.

What oil pressure regulator, fuel distributor, gasoline filter, what oxygen sensor, ignition coil, fuel injector, spark plug~~~ until the ignition switch.

To put it simply, the process of igniting and burning gasoline is nothing more than turning the car key in later generations.But in the engine, it has to go through oil supply, air supply, and then the combination of the two, and then control it through the ignition switch.

Just for this most basic structure, Luo Cheng has to know how to supply oil, how to supply air, and how to match the two together.

The good thing is that Luo Cheng at least knows and understands these words. If he is not in touch with these things, he might not even understand what a fuel injector is for.

When he was studying in the past, Luo Chengcheng was very partial to subjects, and he didn't like to memorize things the most.But now I have to memorize the road map, otherwise, if I take a blueprint over tomorrow, how can I prove that he designed it himself.This is still a low-level design structure circuit diagram, but he feels that even the lowest level can surpass the performance of the current engine.

At least it involves the technology of turbocharging. Now this mechanism diagram not only has a circuit diagram, but also a diagram of the accessories.But for this little thing, Luo Cheng has already drawn several distribution maps.There are only a few dozen parts, and a low-level engine has thousands of small parts.

Now Luo Cheng feels that not only his own people have joined in, but the system's sign-in will also have to be used for this in the short term. He can only pray that he will not sign in to the same organization map repeatedly.But as long as you understand the low-level organizational diagram, it will be easy for intermediate and high-level people to understand in the future.It's just that with the current industrial level, the lathes and precision instruments manufactured may not meet the standards, and they may not be able to manufacture them if they know how to manufacture them.

Staying up until late at night, Luo Cheng, who was used to going to bed early, was fighting in his eyes~~ Hegemony failed~~ Not accomplished.I have gone through the circuit structure diagram several times in my mind, and I will review it again tomorrow morning.

Go to the factory tomorrow and let the Jiang organization understand a path.Why is he level [-] and he is a level [-] engineer.He is not capable enough to reach the seventh level, but he only passed the seventh level.

Having a system means that a gentleman hides his tools in his body and waits for the time to move.

Tomorrow, I will fly a dragon and ride on my face. It is impossible to lose the bet with Team Leader Jiang.They obediently ran errands for me and moved the engine from the drawing to reality.

The next day, Luo Cheng got up early, and looked at both sides of the organizational chart.Looking at the colored drawings taken out of the system, this thing can't be discovered by others. When I'm in the factory, let me make a backup copy of my hand-painted drawings. I'll hide the drawings first, and burn them when I come back at night.

Today's formation arrangement Luo Cheng has already thought about it, even if he wants to build an engine, if he can produce the first engine within a month, it will be considered good.Then mass production requires a large investment and the purchase of a lot of processing equipment.You must know that just one engine can actually form a large factory.

In a short time, don't expect the cube car to make any money.But the workers in the factory can't all be idle like this. The most important thing is that the HR department has already asked the street office to recruit temporary workers.Another group of people will come to the factory in a few days.

So Luo Cheng planned to buy a diesel engine and build a three-wheeled vehicle the size of a pickup truck.Many people should have seen the kind of car that is parked on the side of the road to make up for people's mistakes, or that sells twists and turns around. It is this kind of diesel car.

The rear body shelves of Jiefang trucks are all made of wood and painted green.Luo Cheng can also do that, and the three-wheeled truck is easy to drive, and it can pull people and goods. This body is definitely longer than the box car, but it has one less wheel, and there is no need for a power steering pump, and the bearings are actually reduced.

In addition, diesel engines are cheaper than gasoline engines, so the model is longer, but the cost is actually cheaper.But the model is big and can be sold, and Luo Cheng is not reconciled to selling it cheaply, so he might as well sell it for [-] at that time.

When he came to the automobile factory, Luo Cheng went to the team office first, and handed over the dozen or so structural drawings he had drawn to Team Leader Jiang.The white paper for the drawing is not big, and it is not a regular drawing, so I drew a dozen or so drawings, but in fact there are not many.After that, I will definitely need to use large drawings frequently, and I have to ask the logistics to buy some.

Let team leader Jiang and the others look at it first, if there is anything they don't understand, they will explain it to them after Luo Cheng comes back from work.By the way, let them draw it too, so as to keep a backup.

I saw Director Zhang's car at the entrance of the corridor, which meant that he had already gone to work in Changli. Luo Cheng found him in the back office.Ask him to buy ten diesel engines, the size and model of which are about the same as the gasoline engines last time.A diesel engine of this size must have less horsepower than gasoline, but this doesn't matter to Luo Cheng. It's not normal for a car with three wheels to run slower than four wheels.

After explaining everything, Luo Cheng took a manual forklift, put it on the car and slipped away. Without raw materials, he couldn't do anything.The steel material of the cube car has also been determined, and it has to wait for the rolling mill to deliver the goods.

When I came to the rolling mill, there was still a lot of construction in the mill.Once a stranger and second acquaintance, Luo Cheng still found Director Chen this time.Director Chen had seen a forklift before. When Luo Cheng took out a manual forklift, he said that it was a bit like the fork frame on a forklift.

Luo Cheng told Director Chen that this thing is a manual forklift.And showed him how to use it. Of course, without the pallet, the manual forklift will not be effective.But here is a rolling mill, with steel, cutting, and senior welders, so there is no problem making a temporary steel pallet.

Director Chen didn't know whether he was interested in Luo Cheng's words or in Luo Cheng.Anyway, what Luo Cheng said, he nodded with a smile. After explaining to him, Luo Cheng was afraid that he would not believe it, so he asked him to find someone to make a tray, and he really ordered it right away.The requirements for the pallet are simple, it should be higher than the fork frame of the forklift, and the length of the chassis should not exceed the fork frame.

In fact, Luo Cheng didn't mention the requirements, and Director Chen also understood that the kind of forklift that is not manual requires a pallet to fork things.

"Director Luo, if you can make this manual forklift, are you capable of making a motorized forklift?"

Hearing Director Chen's question, Luo Cheng was overjoyed, oh, not bad, this rolling mill should be a major customer of forklifts.

I don't know if Director Chen understands the principle of forklifts. If he understands it, it's good. If he doesn't understand it, it's even better. If he doesn't understand it, just blow it up.But for some reason, Luo Cheng felt that he couldn't figure out the bottom line of the other party, and whatever he said to him, he always had a smile on his face.

I am bragging about hydraulic forklifts, which is the most advanced technology in foreign countries, and domestic forklifts with backward technology from abroad are still imported.Even if the forklifts imitated in China are just a drop in the bucket, the production of a few forklifts in a month can be enough for a bird.

But when I think about myself, it seems that if I want to produce a forklift, I can only knock it by hand. You must know that for a forklift to fork a ton of goods smoothly, the body must be at least one ton, otherwise it will be useless no matter how powerful you are. Forklift frame It may not be able to press down, but it can lift your car body.

When Luo Cheng was bragging, the workers of a steel pallet rack had already done it. This efficiency, if it is not mechanized production in the future, the labor efficiency of later generations is really incomparable with this era.

With the pallet, Luo Cheng showed Director Chen the difference between this manual forklift and ordinary carts.This pallet can be used to place goods. As long as there are many pallets, the goods on the pallet do not need to be manually placed on the cart when moving. You can directly use a forklift to fork the bottom of the pallet, and then use the principle of hydraulic jacks. Lifting up the pallet is equivalent to lifting up the goods.This saves labor and labor.

Director Chen nodded with a smile. Instead of talking nonsense with Luo Cheng, he directly asked Luo Cheng how much he could produce.And this pallet, I asked Luo Cheng if he could process it. Their rolling mill is currently understaffed, so they can produce steel plates.

This~~ What can Luo Cheng do, if in later life, if Luo Cheng does business, if he can meet a few bosses like Director Chen, he will not be able to make a fortune.

But I want this item, and the price hasn’t been discussed yet~~ Yes, Director Chen keeps laughing all the time. Although it feels very kind to people, he said he wanted it without even talking about the price. This feeling can’t be spiritual There is a problem.

On the way, Luo Cheng actually thought about the price. Steel is expensive now, and the small parts are all manually polished on the machine.Coupled with their own hydraulic technology, even if there is no middleman to make the difference, one will have to sell for two hundred.

"Director Chen, I haven't said the price yet. My manual forklift is not technically advanced. This forklift can cost 200 yuan."

"Okay, reasonable."

~~~ When Luo Cheng told the price, Director Chen still nodded with a smile and agreed.

That's okay~~, one or two good bicycles are only about [-] to [-] yuan, and this is because they are produced with imported tires, so they are so expensive.I don’t have much imported stuff here. Anyway, I want to buy a large amount of steel here, and then they will offset each other. Anyway, the accounts are public-to-public. If you dare to buy it, I dare not sell it.

At the automobile factory, Luo Baotian and the people in the brigade were about to set off to follow the accountant of the automobile factory to get pigs from the livestock factory.Moreover, Luo Cheng's mother and sister-in-law stayed at the car factory and did not follow. Qin Ru knew how to get to Luo Cheng's house.It's just that she never thought that the last time her eldest brother Luo Cheng was just the leader of a certain group, this time he came directly to be the factory director.

And now there are many young men at the door, all young, waiting for the notice at the door. They were recommended by the street office to participate in the interview for temporary workers.

According to Director Zhang, let these little bastards hang out first, and then they have to register with the personnel department first, and then take them to the workshop.

But generally they will stay. After all, they are recommended by the street office, and it depends on who is smart enough to be liked by the master in the repair workshop.At least the temporary worker can become an apprentice sooner.Salary can increase a lot.

(End of this chapter)