Era: Retired from the army at the beginning and returned home.

Chapter 240 Local Forklift Factory

After the meeting, no one stopped Luo Cheng's idea of ​​building heavy trucks.But Luo Cheng himself didn't know what to do. After all, Luo Cheng had experience in modifying this small car. For a big car, he knew the general structure, but he didn't know as well as a small car.

Now there are no heavy-duty trucks imitated in China, and we will not compete with Jicheng for the trucks that are less than eight meters long.Just get a truck with a carriage of more than nine meters, but Luo Cheng also thought of some problems, why Jicheng's first trial production failed.According to the logic, there are quite a few automobile engineers in China, and the designed truck is only [-] yards per hour, which makes Luo Cheng feel a little wrong.

However, Luo Cheng said proudly at the meeting just now that he wanted to build bigger, faster, and higher-loading trucks.This cowhide is blown down, except Director Zhao who has doubts, and Director Zhang who also understands cars and has doubts, everyone else is full of fanaticism.

No, Luo Cheng suddenly thought about the bus at the bus station. At that time, when he first entered the factory and met the bus driver Zhao Dajingang, he found that the steering wheel of the bus was particularly difficult to turn.Although it takes effort to turn the steering wheel of a new car, there is no steering pump.But when an accident happened later, Director Zhang took someone to deal with it. The bearing was slightly bent, which caused the gear spacing to shrink and stuck.

However, the truck designed by Jicheng may not be able to drive fast, but it may not be able to drive fast. This is probably related to the variable speed controller.

According to the theory, Tianhu Diesel Engine Factory provides high-horsepower marine engines.There is no problem of insufficient power. Even if there is no pneumatic power device, there should be no such thing as pulling seven or eight tons of cargo and only being able to drive seventy yards.

This may be related to many aspects, just like when Luo Cheng was still in school, he used only data to make combinations and modifications, and often failed for the same reason. Many times it was caused by various details.For example, if you just change to a high-power engine, if the displacement exhaust pipe does not keep up, what is the use of temporarily increasing the power.After a few strokes, it was scrapped by turning off the flame.

Your transmission rotates fast, the gears are too thin, and the material density is not strong, even if the clearance is accurate.The cargo you are pulling is too heavy, and the gears are broken by you.

So after the meeting, Luo Cheng felt that he was boasting.It is easy to produce a large truck with [-] meters and [-] carriages, but the current bearing model steel is not a question of whether your engine can pull or not, but a question of whether the bearing will break after overloading.

Coincidentally, Gao Ru came back today and took a bunch of data drawings of the forklift.There are design drawings that can be used but not used.There are ten to twenty tons, and it doesn't matter whether you have enough power and lifting power.Anyway, it's just a matter of convenience, in case there are special needs in the future.

Don't disband the research institute. Luo Cheng wants to build heavy trucks. The weight of the vehicle body and the weight of the cargo must be calculated.This is much more difficult than simply calculating the balance weight of the forklift and the strength of the fork.

Because the gravity of the truck is dispersed, the pressure that is dispersed is different from the pressure that is concentrated.But even so, bearings and truck frames have a limit.There are also the transmission force of various parts, the density and size of various gears, and whether the wheel bar can be used on a trolley. Will there be any problems when it is used on a car with a load plus the weight of the car body up to dozens of tons? something to consider.

This research and development requires the cooperation of automobile engineers. Only automobile engineers understand the structure of automobiles, and they need to find dynamic experts to come to joint research and development.If not, Luo Cheng would use the sign-in system to obtain data for every component, but even so, it may not be a panacea.For example, for bearings, what is the use of the size data the system gives you? The steel type requirements of this era are not up to standard. If you use other materials to make them, the load-bearing capacity will definitely not meet the requirements.

It's impossible for Luo Cheng to use the system to develop the steel production process. In order to produce a heavy truck, Luo Cheng can't do anything for a long time.

Let Gao Ru go back to the scientific research institute, and Professor Cao over there also stayed. Team leader Jiang called the day before yesterday, and he will come over in the next two days.After deciding to develop at the Ngee Ann Automobile Factory, the main issue was family placement.These days at Tianhu, Team Leader Jiang and the others are not idle.

We are summarizing and publishing reports on the new performance of the new engine, so it took some time.And some of his colleagues learned that Jiang Changyuan had achieved such success in just two months in Ngee Ann.There are a few who want to follow.

Although it is good in a big city, and there are senior engineers to give advice, most engineers are no longer promoted by learning.But to have their own research and development projects and results.

Jiang Changyuan is an automobile engineer, but with the engine he has developed now, if he turns to the engine industry, even if he is not the leader in the development of this engine.But he is also the second researcher, enough for him to be promoted to the engineer level.

After Luo Cheng made arrangements for Gao Ru to do, he called Tianhu to contact Team Leader Jiang.Jiang Changyuan lives in a small building in Tianhu, and because the rank is not high, there is no telephone at home.I have to call and wait for someone to notify, and then call back from there.

Just half an hour later, the phone in Luo Cheng's office rang, and he thought it was Team Leader Jiang calling.Unexpectedly, it was the second in command of the local department who called.

Ask Luo Cheng if he wants to take over a heavy machinery factory. The machinery factory used to be a merger of several factories and produced tractors.After the merger, it is currently producing forklifts.The main reason is that there are many skilled workers. Senior workers can be transferred to Ngee Ann to assist in the production of forklifts, and they can also beat the car body by hand.

The remaining workers cannot watch the forklift factory collapse and stay in the original factory.Then Ngee Ann Automobile Factory sent people to upgrade the industry and improve the performance of the forklift. Don't mess with the body shape, and it's okay to get a square one.Sold domestically and used in various domestic industries.

You can't produce high-performance forklifts in your own country, export them at high prices, and then import low-performance forklifts at low prices.Foreign debts on the one hand, and the country's own development on the other, are both important.If Luo Cheng hadn't produced a high-performance forklift, the country would have done what it could.

And while asking Luo Cheng if he wanted a forklift factory, he also talked about the export of forklifts at Tianhu.Luo Cheng doesn't care about the export price, it is negotiated by the foreign affairs department and overseas trade personnel.Anyway, the food that Luo Cheng asked for and the remaining 90.00% of the six payments will be given to the car factory, and even here they only need to deliver the goods.Luo Cheng doesn't have to worry about when to export and the issue of payment after export.

On Luo Cheng's side, as long as the car reaches Tianhu, it will be credited.The money will be remitted on time every month, and the car factory does not even need to collect postal remittances.Every month, Ngee’an’s finances will be paid directly.

Yes, why not pick up factories in vain.And this time it's not like a military factory, where a director brings a group of people and equipment.It's the forklift factory over there, with all kinds of managers and even profits.This is a full reception, and it doesn't cost a dime.This is the benefit of state-owned enterprises. There is no such thing as acquisition, only collection and merger.

It is also very simple to upgrade the product. The forklift factory over there already has technicians, and they are transferred to learn hydraulic technology, and then get a copy of the blueprint.

The only thing Luo Cheng has to consider here is whether the benefits should be synchronized, because if it becomes a branch factory there, it seems that many things cannot be controlled.For example, profit, wherever the factory is built, is where the profit is collected.Even if the profits are spent, they are used for local development.

Therefore, it is good to assist the development of the branch factory, and the operating space has geographical restrictions.But after taking over the factory there, it becomes a branch factory, and all the workers actually have to be dispatched by the main factory.Unless it is an unreasonable dispatch, they must obey the arrangement.

Of course, there are actually many ways to make profit output by branch factories, but the operation is a bit cumbersome, and there must be preconditions, and automobile factories have such preconditions.

(End of this chapter)