Era: Retired from the army at the beginning and returned home.

chapter 76

Wang Cheng asked Luo Cheng to wait, and first greeted Master Li, who originally brought someone to help, but now he is about to withdraw, so he has to talk about it.When Master Li heard that Luo Cheng was going to attack Sanlun over there, no matter whether he succeeded or not, he saw Luo Cheng's expression was different.

Everyone respected Luo Cheng as an engineer, but he didn't have much convincing power. He was too young, and he didn't know how this engineer passed the assessment.Although he knew that the assessment could not be faked, he was a little skeptical about Luo Cheng's ability.

Dali, Niuzi, really deserves to be called such a name.They were all apprentices brought by Wang Cheng. Luo Cheng wondered if Wang Cheng brought his apprentices deliberately to make two stronger ones, so that he could save energy by working.

Although many things have been dismantled on the side three wheels, in fact, the outer frame structure is relatively complete all day long.Even if there are no tires, the wheels are still there.The iron sheet is thick, so the shelf alone weighs at least three hundred and dozens of catties.

Dali and Niu Zi carried it from the outside to the workshop with ease, turning over whatever they wanted.

Luo Cheng took a quick look, and found that it was not bad, because it was protected by green paint, and the corrosion was not too serious.The bearings of the frame are also relatively complete, but some interfaces are very rusty, and it takes a little effort to disassemble and assemble.

When Bian Sanlu was carried into the workshop, it basically attracted the attention of everyone in the workshop.And it's still a seventh-level engineer who is directing and arranging, what's the point of this, it's clearly going to attack the opponent in three rounds.

"Master Wang, let them dismantle the side bucket to see if it can be dismantled, if not, then cut it off. Let's get some accessories."

Wang Cheng nodded, immediately explained to his apprentice, and then followed Luo Cheng out of the workshop to the logistics department.Everything must be registered in the logistics department, and then where these things are placed, they will take you directly to the warehouse, and they will point you to where they are placed, and you just need to take them out.

After receiving what he wanted, Wang Cheng was asked to take it to the workshop first, and he went to the factory manager to get the engine.When picking up the engine, the factory manager asked him about the steps, and suppressed his desire to follow along. The previous steps had no technical content.

After Luo Cheng took the engine to the workshop, he roughly compared it. The size of the engine on this motorcycle should not be much different from that on the side three wheels. The position where the engine was placed before is now placed even further. The only difference , it may be that the position of the fixing screw port is wrong.

I took out paper and pens. The paper and pens were from the factory manager’s office. I took a pencil and a ballpoint pen. The cap of the ballpoint pen was red.The factory manager also had a pen, but he cherished it very much, but Luo Cheng didn't borrow it.

People with a little bit of culture in this era are eager to have a pen of their own.As for ballpoint pens, few people use them in this era, because ballpoint pens cannot be completely domestically produced, and everything else is easy to manufacture, but the balls of ballpoint pens can only be imported, so the price of ballpoint pens is not cheap in this era.

A pen, buy a bottle of ink, as long as you cherish it, you can write for many years.However, ballpoint pens need to be replaced frequently, and the price is not cheap, so ballpoint pens are basically not circulated in the market.It is the purchase point only when the unit needs it.

First, use a tape measure to measure the size of the bottom structure, draw a chassis diagram on the paper, and then measure the positions of several fixed points according to the size of the engine, so that Wang Cheng can make iron pipes or thick iron sheets according to the drawings , weld it according to the drawings, of course, when welding it, you need to get out the screw holes.The size is the same as the fixed space on the engine.

For Wang Cheng, Luo Cheng's request was not difficult.But Luo Cheng asked the two apprentices to cut the edge, and he drew the cutting line with a pencil, but it was difficult for them.

The factory doesn't even have that kind of grinder in hand, which can be used for grinding, but it can also be equipped with that kind of small cutting disc, which can be used to cut some iron sheets, stainless steel plates and the like.Suitable for small area cutting.

The large board needs to be cut and pressed by the machine tool as a whole, and some small pipes can actually be cut with that kind of grinder.But there is only one large cutting machine in the factory, which can cut things like iron pipes and side buckets, and it is not easy to cut them horizontally.

So in Luo Cheng's view, it is a very simple matter. Because of the lack of tools, there are only two ways to ensure that it does not deform. The first is to slowly saw it open with a small hacksaw.The second is to send it to the machinery factory, where it will be cut by gas cutting.

As for the fuel tank that Luo Cheng wants, even if he draws it, in the repair shop, he can only take a piece of iron sheet and divide it into many pieces, and then weld them out.But the repairman's welding level, compared with the official welder, may not even be comparable to other apprentices. The fuel tank can be welded out, but there is no guarantee that it will not leak in the future.

Unpaid ambition~~Death first~~, Luo Cheng looked at Wangcheng and the others who were looking at him, and thought it was a simple matter, but a simple cutting and forging couldn't go on smoothly before the work started.Wang Cheng could also weld a fixed plate, but Luo Cheng didn't want to say anything about him, as he was only able to weld at this level.

After drawing the structure and size of the fuel tank, Luo Cheng looked at the ignition device brought from the warehouse. It was still not the same caliber as the original three-wheeler. Without a manual polisher, it needed to be welded, cut, and then polished.

This~~ Forget it, let Wang Cheng and the others fix the fixing bracket of the engine.I haven't done my job cleaning toilets yet.

The work of modifying the side three-wheeler was put on hold first, and the factory manager had to arrange to go to the machinery factory to get the fuel tank out, and the cutting of the side bucket was actually not in a hurry.

It is really taken for granted. In fact, there are many videos of repairing motorcycles and cars in later generations.Get a scrapped car, disassemble it, repair it, and replace it.It is a great sense of accomplishment to turn a waste product into a new look.

Luo Cheng thinks he can do it himself, but without matching accessories, tools, no matter how good the theory is, it's like a clever woman can't cook without rice.

Holding the design drawing of the fuel tank, Luo Cheng went to the factory director's office again and asked him to solve this problem first. If it is convenient, the cutting of the side bucket can also be handled, and there is no need to cut according to the drawn line. Since gas cutting and the like are needed Yes, just divide the cover above the side bucket, and then add a floor to the side to make it longer.

The masters in the workshop were also baffled, there was a lot of thunder and rain, so they turned around and drew a picture, Luo Chengcheng slipped away.Not long after that, someone said that Luo Gong was cleaning the toilet with a broom and a water pipe.

In the security department, Captain Zhang is currently registering information.

"Xu Yongming, right? Luo Cheng's high school classmate, Xiao Liu, take him to find Luo Gong."

"Understood, Captain, come with me."

In many factories, outsiders are not allowed to enter, but they are allowed with someone to lead them.If Luo Cheng is an ordinary worker, then he is usually called out to meet at the door.

But Luo Cheng is not, it's like someone looking for the factory manager, some factory security guard will call out the factory manager.They were brought to see the factory manager.

Although Luo Cheng is not the director of the factory, he is also a seventh-level engineer, so he can't come and call him alone.

　Not to mention the grinder in hand, even if it is a hand electric drill, there are no domestic ones, only imported ones, ordinary factories are not willing to use them at all, and the upper levels will not ration them.

　　
　
(End of this chapter)