Siheyuan starts from a better life

Chapter 261, visit

"Everyone be careful."

Seeing the workers carrying the heavy machine shell, Jiang Yan reminded them.

After the shell was removed, Jiang Yan took the tools and carefully removed the parts, and arranged for workers to arrange the parts and write the corresponding numbers.

Immediately afterwards, he also removed the other three nozzles in the machine.Then, while drinking tea and chatting with the workers, they waited for Hu Dahai to deliver the finished parts.

At first, the workers were a little restrained, but after a while, seeing that Jiang Yan had no airs, they became more courageous.

Some more motivated workers also asked Jiang Yan some technical questions, and Jiang Yan answered them one by one, and gave his own opinions. Soon, Jiang Yan became friends with the workers.

About two hours later, Hu Dahai ran over panting with the completed nozzle, followed by Xu Damao and Guo Jianjun.

"Jiang Gong, this is a finished nozzle, take a look."

Jiang Yan took the completed nozzle and looked at it.

This has to be the handicraft of an eighth-level worker, and the polished one is very smooth in the hand.

Jiang Yan picked it up and looked at the nozzles facing the sun, and then said to Hu Dahai: "It can be used, I will install them now."

"Then I'll help you." After Hu Dahai finished speaking, he put the rest of the nozzles on the table, rolled up his sleeves and came to Jiang Yan.

Seeing Hu Dahai like this, Xu Damao and Guo Jianjun did not hesitate, they also rolled up their sleeves and stood with the workers.

With the help of Hu Dahai, the machine was installed smoothly. After half an hour, the machine returned to its original state.

"Ignite the fire and put the materials."

As soon as Jiang Yan's voice fell, the machine started rumbling.

Where the feed port is, the workers put the basic steel and copper powder into the feed port.

"It's done." At the discharge port, Hu Dahai clapped his hands happily looking at the steel plate emitting the unique light color of copper.

At this time, Jiang Yan yelled at the person operating the machine: "The nozzle is raised by one degree."

After hearing Jiang Yan's words, the workers in the operation turned up the nozzle a little bit, and the amount of copper powder sprayed out from the nozzle increased a lot.

Another batch of copper-clad steel comes out of the discharge port. The copper clad on the copper-clad steel that comes out this time is obviously thicker than the batch of steel.

Then Jiang Yan directed the workers to produce five kinds of copper-clad steel with different copper-clad thicknesses. These copper-clad steels are neatly placed together, which is quite spectacular.

"Jiang Gong, the copper plating chemical has been adjusted."

"it is good"

After Jiang Yan agreed, he began to direct the workers to send batches of copper-clad steel that had been produced into the pool where the copper-plating chemicals had been adjusted.

After coming out for more than ten minutes, this batch of copper-clad steel changed its appearance, and it looked like it was made of brass.

Of course, Jiang Yan did not soak all the copper-clad steel produced in the copper-plating chemicals, and the soaking was only one-third.

Next, Jiang Yan arranged for workers to anneal and surface-treat the two batches of copper-clad steel.

No matter whether the formed copper clad steel has been treated with copper plating chemicals or not, it will emit the unique light of metal. Especially the copper clad steel after copper plating chemical treatment looks like a whole piece of gold. .

"Old Hu, send two batches of copper-clad steel to the bullet production workshop to produce bullets. The copper-clad thickness of these copper-clad steels is different. Make detailed records to see whether these copper-clad steels are made of bullets and copper-clad steel. How big is the difference between the finished bullets, make a record, and pay attention to the difference between the two copper-clad steels to see how big the difference is between the two.”

"In addition, we must find the copper-clad steel with the least difference from the bullets produced by pure copper. Remember to compare their cost performance and try to find cheap and good copper-clad steel."

"Write some and then write me a report in detail"

"Don't worry! Jiang Gong, I understand. I'll make arrangements right away."

After saying this, Hu Dahai turned his head and began to arrange for workers to send the produced copper-clad steel to the bullet production workshop.

Xu Damao next to the "boss" called Jiang Yan.

Jiang Yan thought he had something to do and looked back at him, seeing his hesitant to speak, Jiang Yan couldn't help kicking him.

"What's the matter, you have something to say, why are you coy."

"Well, why don't you go and have a look at the production of bullets?"

Hearing Xu Damao's words, Jiang Yan looked at him a little strangely.

"Why do you want to go? It's fine wherever there is Lao Hu, and I still need to get some mechanical equipment!"

"No, boss, aren't you curious? That's the production of bullets! I don't know how the bullets are produced!"

At this time, Jiang Yan finally understood Xu Damao's hesitation and hesitation just now. This guy wanted to see the production of bullets. It's no wonder that most men like more violent things, especially guns and cars. No matter in that era, it was basically that person's favorite.

You also don't ask why men like guns.

Since ancient times, beauties have loved heroes, which good man would not want to fight for the country?There is always a passion in my heart, and I am willing to take up arms to defend my home and country!Watching the heroic life of the predecessors in battle, watching the heroic posture at the military parade, when the national anthem is played and the red flag is flying, there is no need to ask why most men like guns anymore!
But what he said moved Jiang Yan a little bit. To be honest, although he had seen the production of bullets and firearms on TV or on the computer in the last world, he had never seen them at close range. Now he has this Opportunity, it is better to see some.

"Old Guo, can I go to the workshop where bullets and firearms are produced?"

Jiang Yan turned to ask Guo Jianjun.

"Of course, the pass I issued to you before is the highest level pass in our factory. You can visit all the places in the factory."

"What about him!"

Jiang Yan pointed to Xu Damao whose eyes were shining brightly.

"Da Mao's is also fine, just register at the gate, but he still can't go to a place where his pass is too confidential."

Hearing what Guo Jianjun said, Jiang Yan nodded.

"There's nothing else going on now. Let's go and see how this bullet is produced. To be honest, I'm also curious about this."

"No problem, Mr. Jiang, I will take you to visit right now."

After saying this sentence, Guo Jianjun led the way, leading Jiang Yan and Xu Damao to the bullet production workshop.

"These two workshops are workshops that produce shells for grenades, and these workshops are workshops that produce bullets for rifles and machine guns."

Along the way, Guo Jianjun introduced the heavily guarded workshop next to Xu Damao and Jiang Yan.

"Is there no workshop in our factory for the production of shells and artillery?"

Hearing Jiang Yan's question, Guo Jianjun shook his head.

"Our factory mainly produces light weapons. Cannons are heavy weapons and are produced in other factories. Mr. Jiang, if you want to visit, I can coordinate with you."

"No, no, I'm just asking."

(End of this chapter)