Siheyuan starts from a better life

Chapter 274, Testing

In order to make it easier for the inspection team to inspect the firearms, the factory manager purposely set up two tents at the shooting range observation platform, and basically put all the firearms and tools needed for the test inside.

"Old Zhao, you are well prepared." Comrade Liu who entered the tent walked around inside and took a newly released Bayi-type assault rifle.

As soon as Comrade Liu finished speaking, two more people walked over from outside.

Both of them looked to be in their 50s, wearing glasses, a Chinese tunic with a pen pinned to the neckline, and they looked like technicians.

Seeing these two people come in, Comrade Liu, who was playing with the "August [-]" automatic rifle, put down the gun in his hand and walked forward quickly.

"Ning Gong, Qi Gong, you are here," Comrade Liu greeted, and grabbed Jiang Yan who was next to him.

"Ning Gong, Qi Gong, let me introduce you, this is Comrade Jiang Yan who invented this assault rifle."

"Hello Comrade Jiang Yan, I'm Ning Yuancheng."

"Hello Comrade Jiang Yan, I am Qi Weimin."

After listening to the two people's introduction, Jiang Yan spoke with a smile on his face.

"Hello, Comrade Ning Yuancheng, Comrade Qi Weimin, I am Jiang Yan."

Then Jiang Yan also reached out and shook hands with the two of them.

"Xiaoyan, you don't know yet! Comrades Ning Yuancheng and Qi Weimin worked in the 626 factory before. Back then, they presided over the imitation of the Type 50 submachine gun and the American M2 carbine. They are quite experienced."

Type 50 submachine gun, imitation is SL's PPS-43 submachine gun.The factory that produced this gun is the 626 factory.

The predecessor of the 626 factory was the arsenal of the three eastern provinces founded by Zhang Zuolin, a warlord of the Feng dynasty in 1921. After the "September 1946th" incident, it was called "the first factory of Fengtian military building" during the Japanese and puppet rule. In March 3, the Kuomintang took over and renamed it "1948 Arsenal Gun Institute". After the liberation of the entire Northeast on November 11, 2, the Military Industry Department of the Northeast Military Region took over the factory and changed it to the "No.

After the factory successfully trial-produced 1950 M-type M2 carbines in early 300, it then trial-produced the PPSh-41 submachine gun, called the 50-type submachine gun, and changed its drum to a curved magazine. In June 1950, after the outbreak of the Korean War, because Shengjing was in danger of being attacked by the enemy, the Northeast Bureau decided to move the relevant factories to the north, among which the "Wuyi Factory Gun Institute" was moved to Bei'an. In January 6, most of the workshops were installed and trial production began. On March 1951, 1, the Northeast Ordnance Industry Bureau officially changed the name of the factory to "San Er Factory", which was later called "State-owned 1951 Factory" and "Qinghua Tool Factory" to the outside world.In the same month, the Type 3 submachine gun was officially finalized, transferred to mass production, and sent to the Korean battlefield.During the War to Resist US Aggression and Aid Korea, most of the standard light weapons used by the Volunteers came from the 1 factory.

"Don't dare to do it, don't dare to do it. We're just picking on people's teeth. It's not as good as this assault rifle designed by Comrade Jiang Yan. He is the first rifle that our country shoots by itself."

After Qi Weimin finished speaking, Ning Yuancheng next to him spoke.

"I didn't expect Comrade Jiang Yan who designed this rifle to be so young. This is really a boy born from a hero!"

The two of them sang together, and Jiang Yan was a little embarrassed when he said it, so Jiang Yan quickly waved his hands.

"Qi Gong and Ning Gong are both old seniors, the boy should not be praised like this, it's serious, it's serious."

After several people exchanged a few more pleasantries, Qi Weimin said at this time: "Comrade Jiang Yan, how did you come up with the idea of ​​designing the empty gun to hang up, and what is your rationale for this?"

Hearing Qi Weimin's question, Jiang Yan was taken aback, thought for a while before speaking.

"The inspiration for the empty gun hanger comes from Citigroup's M1 Garand rifle. This rifle will automatically eject the magazine after shooting, reminding the soldiers in combat that they have finished shooting. At that time, I wondered if I could design a similar device, so I designed the empty gun hanger, which can remind soldiers who are fighting that the bullets in the magazine have been fired and need to be replaced."

"Actually, the principle of hanging up the empty gun is very simple." After Jiang Yan finished speaking, he picked up an empty magazine from the table, and pointed to the spring support plate inside the magazine.

"When the magazine is empty of bullets, the spring plate in the magazine will push upwards to the protrusion of the hook handle. After the last bullet is fired, the slide moves backwards. When the hook slot is aligned with the hook handle, the hook handle moves up to withstand the hook slot under the push of the magazine spring, so the slide cannot be reset. It stays behind to remind the shooter to empty the bullet. At this time, even if the magazine is pulled out, the hook handle held by the sleeve will not recover."

"After inserting a new magazine, because there are bullets in the magazine, the spring support plate is pressed down and cannot withstand the hang-up handle. So at this time, the shooter presses the hang-up handle down with his fingers, and the hang-up handle will be separated from the slide, so the slide resets and the first bullet is loaded. Or the slide can be pulled back, and the hang-up handle resets under the action of the spring on the right. After the slide is released, the slide resets and loads."

Hearing Jiang Yan's explanation, Qi Weimin suddenly realized, took the magazine and looked at it repeatedly, and then said: "So that's the case, I understand."

"I have to say, you have the same idea as a genius."

"Qi Gong is your praise. I think even if I can't design it, according to the ingenuity of our country's engineers, I believe they will invent it soon."

At this time, Wang Hui came over with a list, and said to Qi Weimin and Ning Yuancheng: "Qi Gong, Ning Gong, this is the roster of all the third-level workers in the project. You can choose workers at will for manufacturing."

Hearing the words of the military representative Wang Hui, Qi Weimin nodded, took the roster he brought over, turned his head to Ning Yuancheng and said, "Lao Ning, you will take some technicians to select workers to produce parts in a while, and pay attention to making records. I will take people here to test the automatic rifles that have been produced, and then re-test after the new guns are manufactured."

"I understand, Lao Qi, I will leave the production side to me. Don't worry about that."

Hearing the conversation between the two, Jiang Yan understood that this group of technicians was obviously Qi Weimin who came to make up their minds.

Watching Ning Yuancheng take the people away, Qi Weimin began to arrange for the remaining engineers to disassemble the several automatic rifles placed on the table according to the drawings, measure each part with measuring tools, and record in the notebook while measuring.

At this time, Wang Hui came to Jiang Yan and pulled Jiang Yan out of the tent, and whispered to Jiang Yan, "Little Jiang, there is no problem with the production side!"

Hearing Wang Hui's question, Jiang Yan said without thinking, "No problem, most of the parts of our firearm can be stamped and manufactured, and the rest of the parts are relatively simple. Let alone third-level workers, there are some skilled second-level workers who can manufacture them. Besides, many of the equipment in our factory were disassembled and debugged by my technicians.

"Okay, as long as you know what's in your mind, I'll wait for your good news." Hearing Jiang Yan's answer, Wang Hui felt relieved.

(End of this chapter)