Siheyuan starts from a better life

Chapter 299, Meeting

Early the next morning, the jeep that came to pick him up stopped at the door of his house. Seeing the driver in the car, Xu Damao and the others were stunned.

"This is Wei Baoguo, Xiao Wei. From now on, he will be my full-time driver." Jiang Yan introduced the driver assigned to him by his superiors, but Jiang Yan did not tell them his specific identity.

Only Xu Damao and Jiang Yan got into the jeep together, Shitou and Zhuzi rode "Kazi" and walked to the rolling mill together.

"Boss, the factory manager asked me to call you to a meeting. Today, the big leaders of the first machine department also came to attend the meeting." Not long after entering the factory to work, Xu Damao came to his office.

"Okay, wait for me, I'll pack up and let's go there together."

When Jiang Yan rushed to the meeting room, there were already a lot of people sitting in the meeting room, and the cadres above the middle level of the entire rolling mill had already arrived in the meeting room.

After Jiang Yan entered, he quickly found his seat and sat down.

After another ten minutes or so, the conference room was already full of people. The big leader sitting on it turned his head and said to Director Yang next to him, "Everyone is here!"

Hearing the big leader's words, Factory Manager Yang counted the people below silently in his heart, raised his head and said to the big leader: "The people are all here."

The big leader nodded after listening. He patted the speaker in front of him, and then opened a document in front of him.

"According to the requirements of the superior leaders, the original technical department of the rolling mill will be independent and form a new research institute, code-named 665, which specializes in the research and development of special steel, machinery manufacturing and other equipment. Comrade Wang Honghai was appointed as the first director and secretary of the institute to preside over the overall work."

The big leader paused for a while when he said this, and a man who was about 40 years old with a Chinese face sitting below stood up and looked around. This is Wang Honghai, the newly appointed director of the research institute.

The reason why a director was airborne from above was to get along with Jiang Yan. The purpose was to allow Jiang Yan to concentrate on scientific research tasks, and to protect Jiang Yan. After all, Jiang Yan is only 21 years old now, and he is actually a little younger. Beautiful in the forest, the wind will destroy it

These bigwigs still understand this truth, they don't want to praise and kill Jiang Yan, everyone has seen what he has done in the past few years since he came back.

However, the two of them were at the same level, both level 13, department level, and they also talked to Wang Honghai specifically. Jiang Yan still has the final say on matters related to scientific research.

Jiang Yan was also very satisfied with the arrangement above.

Immediately afterwards, the big leader said again: "Comrade Jiang Yan was appointed as the chief engineer of the research institute to preside over scientific research tasks, and Jiang Yan was exempted from the position of chief engineer of the third rolling mill at level [-] and changed to a consultant."

As soon as the news came out, there was an uproar below. In fact, everyone knew that Jiang Yan went out to complete many tasks this time, and also knew that Jiang Yan would be promoted. Everyone thought that he would become the deputy director of the rolling mill. A new scientific research unit has been established, and the news is really exciting.

"The superior decided to establish an experimental site integrating production and research. The experimental units are the 665 Research Institute and the third rolling mill."

As soon as the big leader said this, everyone below was in a dazed state. No one had heard of what this integration of production and research was, and everyone couldn't help looking at Jiang Yan who was sitting there.

The establishment of the integration of production and research was an idea brought up by Jiang Yan in a meeting with a group of bigwigs. In fact, this integration of production and research is very common in the later stage.

Specifically, industries and scientific research institutions cooperate with each other to give full play to their respective advantages and form a powerful advanced system integrating research, development and production.

Scientific research institutes have technology, talents and platforms, and enterprises have production capacity and market channels. Through industry-research cooperation, the two parties can give full play to their respective advantages, share resources that they cannot obtain, and promote the transfer and transformation of scientific and technological achievements, and the transformation of technological innovation into real productivity. .

The reason why Jiang Yan put forward such a point of view is because in the history that he is familiar with

Our universities, scientific research institutes, and enterprises operate on different tracks, and not many can be deeply integrated, resulting in a lot of waste of resources. Often, the things researched by scientific research units are too advanced and unsuitable for reality, so they are shelved.Another part is due to the unequal information. It was originally a technology that has been researched in scientific research institutions, and our country still has to spend a lot of money to buy it.

For example, in 1958, Sijiucheng No. 53 Machine Tool Factory cooperated with Tsinghua University to trial-produce China's first CNC machine tool—X1K[-] three-coordinate CNC machine tool.The birth of this CNC machine tool has filled the gap in the field of CNC machine tools in our country.

However, at that time, we did not have enough understanding of the characteristics and development conditions of CNC machine tools. Under the circumstances of poor quality of personnel, unreliable foundation, and unqualified quality of supporting parts, we developed blindly, and finally failed because the performance was too bad to be used in production. termination.

As a result, my country's machine tool industry has lagged behind the world for 30 years, which is a pity.

Don't look at a small machine tool as inconspicuous, it is the cornerstone of a strong country.

In order to prevent history from repeating itself, Jiang Yan could only bite the bullet and explain in this report some of the reasons for the lagging behind of my country's machine tools in later generations.

In order to prevent my country's machine tool industry from going down the old road, Jiang Yan analyzed a lot of evidence at the meeting, and pointed out that there are two important development directions for the machine tool industry in the future, "targeting intelligent production" and "improving stand-alone standards" as the target .

"Aiming at intelligent production" means that machine tools will have communication functions to realize real-time interconnection between machine tools, machine tools and other production equipment, and machine tools and management centers. The core of "improving the stand-alone standard" is "higher, faster and stronger".The development of machine tools has always been closely centered on the improvement of the three core indicators of precision, speed and performance, and finally can meet the processing needs of new materials and new industries, and achieve the purpose of reducing costs and improving efficiency.Therefore, additive manufacturing, compounding and specialization of stand-alone functions are the focus of future innovation.

At the meeting, Jiang Yan also used Hans Guo as an example to illustrate.And pointed out that the machine tool industry is a process with high technical threshold, high professional division of labor and long-term accumulation.

He also pointed out that my country's industrial foundation is not solid, "nutrients" are poor, and there is no complete research and development system for the machine tool industry, which seriously restricts the development of my country's machine tool industry.On the upstream design and manufacturing side, my country has a weak foundation in materials, components, and experience, and it is difficult to support the high-end machine tool field to achieve full autonomy; on the downstream application side, without imported raw materials, high-end machine tools are like "scrap copper and rotten iron" in my country Same useless.

It was Jiang Yan's bold explanation at this meeting that led the leaders to use the newly established branch research institute and the third rolling mill as pilot factories, and at the same time issued a document requiring the domestic "Eighteen Arhats" machine tool factories to practice their internal skills hard.Resolutely prevent them from taking the road of "greedy for big things and quick things".

However, the consequence of Jiang Yan's doing so was that his security level was once again raised by the leader, but Jiang Yan still had no complaints or regrets.

(End of this chapter)