Siheyuan starts from a better life

Chapter 453, this night

The next day, the sky was slightly bright, and a Hongqi car was driving on an empty street. There were only cleaners cleaning the road, and there was no one else. Sijiucheng was still asleep, and the big man sitting in the car was The leader rubbed his head, which was a little swollen and painful. The meeting this night was really draining his energy.

I can’t bear to accept my old age!If this were back in the past, when I was doing my own thing, it would have been normal for me to command the troops for several nights without rest. At that time, I was not in the same state as I am now, so I would be exhausted after staying up all night.

The big boss rolled down the car window, and a gust of wind blew into the car from the outside. Breathing in the fresh air, the big boss felt that his head was sober.

"Boss, would you like to go home and take a rest?" Secretary Wu, who was sitting on the passenger seat, asked.

Secretary Wu had just observed in the rearview mirror that his leader was very tired, and couldn't help but give him a reminder.

"Forget it, I won't go back. I'll go directly to the No. [-] Machinery Department. I'll just take a break in the office at noon. By the way, is there any tea?"

As soon as the big leader finished speaking, Secretary Wu took out a thermos cup from the bag he carried and handed it over. The big leader took it and opened it and took a sip. The bitter tea entered the mouth. If anyone is interested, take the big leader's thermos cup. You will find that there is more than half a cup of tea in this thermos cup.

"Boss, why don't we eat something? No matter how busy we are, we have to pay attention to our health." After seeing the leader take a few sips of tea, Secretary Wu couldn't help but ask again.

"Xiao Wu, you're right. Now that you've said it, I'm really a little hungry. Thank you for staying with me all night last night. I'll treat you to fried liver."

Hearing that the leader said he wanted to eat fried liver, the driver quickly drove towards Gulou Street, where Yao Ji's famous fried liver restaurant was originally located in Gulou Street.

Yesterday afternoon, after Jiang Yan and Wang Honghai left, the senior leader took the notebook they sent to find his minister to report. The minister of the First Machinery Department also saw the contents of the notebook before going with the senior leader. Report the situation to the chief, and by the way, they also report the relevant situation of CNC machine tools to the leader at once.

Not surprisingly, when the leaders heard the news about the success of this CNC machine tool, their faces were filled with joy and their eyes were filled with enthusiasm.

It’s no wonder that the leaders are excited. This CNC machine tool is also an advanced thing in the world. It has only been a few years since Yingjiang invented this thing. Our country has developed the world’s most advanced CNC machine tool, which can realize production automation. This is unprecedented in the world!”

More importantly, we can use this incident to comprehensively establish our own image of hard work. We can still do what others can do.

Since the relationship with the Mao Xiong Country broke down, the First Machinery Department has been under unprecedented pressure. When they evacuated, they took away all the design drawings, plans and related information, and stopped supplying important equipment urgently needed for construction. A large number of Reduce the supply of key components in complete sets of equipment and various equipment.

This has resulted in many factories running out of parts for a long period of time, causing some production plans to be postponed or simply canceled. In addition, the country is now vigorously carrying out the construction of the third line. This has There is a shortage of equipment everywhere. For these missing equipment, a thick pile of application reports for equipment from various factories is placed on the desk of the big boss.

Although the country now has the production of machine tools, the machine tools they produce are only relatively low-level machine tools. Due to the serious shortage of technical personnel, even three-shift production cannot meet the needs of the country. Those Not to mention the mid-to-high-level machine tools. These are some machine tools that Jiang Yan has successfully reverse-copied before. Otherwise, the production of these mid-to-high-level machine tools would be impossible. Even if they can be reverse-copied, the production of these machine tools requires a large number of high-level workers. , the production speed can be imagined. The production of every medium and high-end machine tool is registered in the First Machinery Department. Each machine tool requires personal approval from the leader before it can be decentralized to the factory. Therefore, the First Machinery Department sent a large number of The staff go to these factories that can produce mid-to-high-end machine tools.Now with CNC machine tools, these situations can be easily solved. Although the report states that once CNC machine tools are mass-produced, the production accuracy will decrease, and they can only produce workpieces of up to five levels.

But this is quite good. Being able to produce workpieces above level four has solved a lot of trouble.As for the ability to quickly produce CNC machine tools, the top leaders made a guarantee at the evening meeting.

At the meeting last night, it was also said that the health of researchers must be protected, and that logistics requires top leaders to take charge of it themselves. The meeting also specifically mentioned that some supplies would be given to these researchers today.

Although the difficult period has passed, the supply of materials is still quite tight. The fact that some materials can be specially approved is enough to show that the chief attaches great importance to CNC machine tools.

What impressed the top leaders the most was the chief’s arrangements for the announcement of CNC machine tools. Although the country won the founding battle, strictly speaking, the country’s current strength is still not strong. How to announce the results of its own research? You have to be very careful when it comes to CNC machine tools.

Carefully consider the external publicity of these scientific and technological achievements, because once they are made public, they will inevitably attract great attention from other countries.By then it will be difficult to control the risks, but we cannot hide these achievements all the time. The country also needs to properly publicize them at home and abroad, otherwise it will not be able to demonstrate its national strength. "

After discussions at the meeting, it was unanimously decided to adopt a stop-start strategy. Only a little information needs to be revealed, but not all.Externally, we claim that we have only developed a new type of CNC machine tool and will not mention the specific details. In this way, although the enemy will know that we have made a breakthrough, the specific details will be difficult to grasp.Nor are they sure of the true extent of our technological prowess. "

There is another more vivid metaphor here, like sand held in the palm of your hand, with some leaking out through the fingers, which not only shows strength but also increases the sense of mystery.

Everyone also attaches great importance to Jiang Yan's notebook. They know that with these alloys and CNC machine tools, the country's comprehensive strength will make a qualitative leap. Jiang Yan's proposal was unanimously approved at the meeting, and The senior leaders were ordered to write out an effective implementation plan and put it up for discussion in the meeting. After the discussion was passed, it was distributed, and the specific person in charge naturally fell on the senior leaders.

That night, the senior leader accompanied the chief again and rushed to Jiang Yan's research institute overnight.

He also took his entourage and photographer to conduct an on-site inspection of those advanced CNC machine tools.Silver-white machine tools are lined up in the workshop. If you get closer, you can see the fine circuits and shafts on them.Touch the surface of the machine tool with your own hands and feel its cool texture.

The photographer was busy taking photos of various parts of the machine tool. Under the bright work light, the photos recorded this historic moment.

Thinking of this, the big leader's mouth showed a smile. Jiang Yan is really a good guy, and it was not in vain that he won so many rewards for him at the meeting.

To be honest, the big boss is both happy and troubled about Jiang Yan. What he likes is that he can research better things from time to time. These things are of great significance to the country. The only headache is the reward given to Jiang Yan after his meritorious service. Because Due to his young age and the protection given to him, promotion was impossible, and he could only be given monetary rewards. As for the calligraphy and paintings of the chiefs, Jiang Yan also had a lot of them.

What our party emphasizes is that merit must be rewarded and deeds must be punished. No matter how troublesome it is, rewards must be given. Countless brain cells were wasted on how to reward Jiang Yan.

(End of this chapter)