Siheyuan starts from a better life

Chapter 544, The Tenth Workshop

"Mr. Jiang, I heard that you are back. I came to see you." As soon as the second uncle finished speaking, he appeared in the yard, and after a while, he came to Jiang Yan's living room.

"Hey! I haven't seen the old lady for a while. I feel that you look much better." The second uncle came to the house and said hello to the old lady.

"That's not true. I don't even want to come back." The old lady said cheerfully.

"Zhuzi, pour tea for the second uncle. Second uncle, sit down." Jiang Yan greeted the second uncle Liu Haizhong.

"Thank you, Mr. Jiang." The second uncle put the wine on the table and happily took the tea poured by He Yuzhu.

"Second uncle, if you are interested, let Zhuzi cook some good food tonight, and let's have a drink. Try the good wine that the second uncle brought over." Jiang Yan said directly.

Upon hearing Jiang Yan's invitation, the second uncle happily agreed. He felt like he had come to the right place this time.

"What about that, boss, second uncle, you guys talk first. I'm going to see what else is in the market. It's too cold today. I guess there are a lot of people selling vegetables and food."

"Da Mao, you go with Zhu Zhu and bring our non-staple food certificates with you. Buy as much as you can." Jiang Yan thought about it and felt that He Yuzhu said this was quite correct. This sudden drop in temperature, especially in tight situations, Then came the cold winter. All kinds of materials will increase in price. Not only will the prices increase, but with the arrival of winter, the supply of various materials will become even tighter. It's not the depth of winter yet, so don't stock up on things. When supplies are in short supply, you won't be able to buy much even if you have money. After all, there are a lot of smart people nowadays.

Xu Damao, who was sitting there, responded and then called Liuzi and Shitou. Seeing that Jiang Yan had something to talk to the second uncle, the ladies gathered around grandma and Jiang Sirui and went to grandma's room.

After everyone left, Jiang Yan asked Liu Haizhong. "Old Liu, are there any big changes in the institute now?"

"The changes are quite big." The second uncle Liu Haizhong thought for a moment and said.

"In the early days, the entire institute was screened, and many people with problems or whose identities were unclear were transferred to other factories. Now the security inside the institute is much stricter. Barbed wire fences are installed on the high walls, and all entrances and exits must be checked. With a work permit, people from outside come in, and the review is much stricter.”

"The biggest change is in the production workshop. There are currently ten workshops in the entire institute. I am the workshop director of the second workshop. Now the entire experimental workshop has been abolished. Most of the workers in it have been replenished in other workshops, and workers with good skills have been replaced. He was transferred to the tenth workshop, but the inspection of the tenth workshop is quite confidential."

After the second uncle Liu Haizhong said this, he hesitated for a moment and then asked Jiang Yan.

"Mr. Jiang, do you know what exactly this tenth workshop produces?"

"Don't ask what you shouldn't ask. Haven't you learned the confidentiality regulations?" Hearing Liu Haizhong ask Jiang Yan, Leng Sheng interrupted him.

Jiang Yan knew very well about the tenth workshop. When he was working at Shengjing Aircraft Factory, the drawings related to the workshop had already been in Jiang Yan's hands, and his superiors even sent a person to listen to Jiang Yan's plan for the tenth workshop.

Originally, Jiang Yan planned to divide the ten workshops into two. The first half would continue to be used as a base for continued research on CNC machine tools, and the second half would be used as a place for replicating high-end precision equipment projects.

After Jiang Yan's last conversation with Mr. Lu and Mr. Xu, Mr. Lu applied to the superiors for their Fifth Master project to set up a special design room in Jiang Yan's research institute.

The Fifth Master came in, and after Mr. Xu found out about it, the Zhan-7 project, which was imitating cats and drawing tigers, also moved in. The Zhan-7 project also set up a studio, and the Zhan-7 project also joined the Zhan-6 project.

Seeing the studios that had applied for them one by one, Jiang Yan was overwhelmed. He didn't even have the ability to clone himself! Each one is still a key project.

After much deliberation and communication with them, Jiang Yan was appointed as the director of this special design room as an honorary researcher of the institute.

Jiang Yan's special design office is not under the direct leadership of the project department or the research institute. It only assists General Engineer Lu and his colleagues in solving project problems.

The power you need is in your own hands, just listen to the tune and not the announcement! In this way, Jiang Yan's other tasks will not be delayed, and he can go to Jiang Yan at any time to discuss the problems encountered in their projects.

The biggest disadvantage is that as the chief designer of the project, he often acts as a trapeze artist, flying back and forth between the two places. In order to create a better Fifth Master, we aviation people can overcome any difficulties!

However, after the superiors heard the news, they specially opened a dedicated phone line, but even so, some things were better solved on their own.

Just like that, the renovation plan of Workshop 10 changed drastically once again.

After Jiang Yan's planning. The team responsible for the reconstruction and construction divided the ten workshops into four relatively independent areas.

The first area is for the project of improving CNC machine tools. Since the machine tool is relatively large and needs to be disassembled frequently, a relatively large compartment is left, mainly for storing drawings and temporary meetings of the project team. Of course, there is There is also Jiang Yan's separate studio.

The second area is slightly larger than the first one. It is filled with various mechanical equipment allocated by superiors. It can be regarded as a small mechanical processing factory.

Moreover, the workers working here have basically been reviewed for three generations. It can be said that there is no flaw in their identity. Moreover, the workers here are basically intermediate-level or above workers, with three seventh-level workers and one eighth-level worker.

The superior also gave Jiang Yan a list of names. If the task was urgent, Jiang Yan could directly mobilize the senior workers recorded above.

The machine tools in Workshop No. 10 are basically the most advanced ones currently available in the country. Jiang Yan's CNC machine tools are also in there.

What Jiang Yan is more concerned about is that there is a C620-1 machine tool produced by our company.

It’s impossible not to pay attention! This machine tool is the first machine tool in our country.

At that time, the workers of Shengjing No. 55 Machine Tool Factory, based on the machine tool drawings provided by Mao Xiong, overcame the difficulties under the conditions of very backward equipment and technology, and successfully manufactured the c8-620 machine tool in August 1.

The c620-1 machine tool is a typical turning horizontal processing machine tool.

Since its birth, it has been widely used in the machining industry.

The spindle is the main moving part of the lathe. The quality of the spindle directly affects the machining accuracy of the machine tool.

The C620-1 lathe independently produced by Zhongjia has extremely high quality spindle components and high machining accuracy, which is not inferior to the foot basin chicken machine tools that occupied the majority of domestic factories at that time.

This is also the reason why the c620-1 machine tool plays an important role in the development and construction of the national economy.

In order to commemorate this domestic machine tool, which is of great significance to farmers, the two-yuan banknotes issued in 60 showed the figures of workers working hard using the machine tools.

Domestic machine tools accompanied the Zhong family through that period of arduous construction and laying the foundation for modern industry.

Today's machine tool industry is booming. CNC machine tools with higher precision and higher performance have begun to enter the production lines of all walks of life. Domestic machine tools like the c620-1 have gradually withdrawn from the stage of history.

Although the c620-1 lathe has faded from people's sight, it will never be forgotten.

In the Zhongjia Industrial Museum, a rusty C620-1 machine tool is still preserved. Every year, a large number of visitors come to visit and commemorate this once important machine of the country.

It is a symbol of the national independence and industrial independence of Zhongjia. The people of Zhongjia will remember its contribution and continue to exert the craftsmanship of independence and hard research to strive for excellence in Zhongjia manufacturing and lead it to the top of the world!

(End of this chapter)