Siheyuan starts from a better life

Chapter 738, training employees

Professor Wang came to the processing area, where various machine tools and measuring tools have been prepared.

Carefully study the design drawing of the optical system, look at the dimensions on the drawing, and start making design calculations.

Next to it, several other technicians also performed their duties and treated every link carefully. Everyone was concentrating on their work, and occasionally exchanged a few words to discuss technical issues. The room was quiet again, and the only sound that could be heard was the person sending and receiving materials in the archives room flipping through folders.

Jiang Yan sat at the table, listening to the radio and flipping through the information at hand.

He raised his head from time to time and looked at the workshop through the window, and the busy figures of other people came into view. From time to time, he saw some technicians sitting in front of the workbench and calculating carefully, with their brows furrowed and looking attentive. Jiang Yan's mouth corners were slightly raised. He was not crazy or a devil. The country only needs some people like this to make continuous progress. .

With a "pop" sound, Jiang Yan turned off the radio. He stood up, stretched his somewhat stiff arms and legs, and then came to the window and looked out.

Not far away, the construction site for new scientific research offices and factories was busy. Construction workers were busy. Jiang Yan saw that a huge square construction pit had begun to take shape, which was more than ten meters deep and covered an area of ​​about 3000 square meters.

This is the main structure of the new research institute. It has two floors underground and five floors above ground. In addition, there is an additional production workshop. This function is quite complete. For such a large-scale foundation pit project, the construction site is also equipped with several large-scale machines. Excavators, such large machinery and equipment, are still very rare nowadays. The fact that they can be deployed here shows how much the superiors attach great importance to this project.

Simple tents were set up around the construction site, as well as piles of building materials and temporary supplies. The scene was very lively.

So he found a few pieces of materials, added simple shelves and steel plates, and built some small carts. Then he found some materials from the scrap pile and welded them together to make a simple hydraulic lifting device.

The project is advancing slowly, and everyone is basically working hard. Jiang Yan will explain to them the problems they encounter from time to time. It has to be said that their progress is still quite great, and the speed of the engineers is still quite fast. , this has just entered autumn, and the new factory building has been completed.

"Let me tell you, our manager Jiang is full of ideas!"

By then, more advanced and complex development will not be a problem.

They knew that these machine tools were new precision machine tools developed by Jiang Yan before. According to the secretary, they were more advanced than foreign ones.

"It's so extraordinary! Mr. Jiang is really talented for coming up with such a method!"

"Be safe in front, use force in the back!" Jiang Yan shouted from the side.

Jiang Yan nodded with satisfaction and continued to direct the transportation of other machine tools.

"Haha, I modified this with scraps. You can use it if you want to carry heavy objects in the future." Jiang Yan said with a smile.

"Wow! Why is this little car so powerful?" Several young men marveled.

Jiang Yan looked at it for a while and nodded secretly.

Early that morning, the workers in charge of transportation filed in and began to move various machine tools and equipment into the factory.

"Smooth left and right, put it down slowly!" The large lathe was finally placed.

When moving these large machine tools, Jiang Yan found that it was unrealistic to rely solely on manpower. Each of these CNC machine tools weighed several tons, and it was extremely difficult to move them. So he decided to use his little hands and improve the handling tools.

Once the new place is built, their working conditions will improve a lot.

Although the workers worked hard, every face was filled with excitement and pride.

I saw a dozen strong workers coming forward, slowly lifting a huge machine tool, placing it on a manual forklift, and carefully moving it into the factory.

Although this trolley is simple, it has enough power to reduce the burden of transporting machine tools.

"Comrades, be careful. That machine tool is a heavy-duty turning center. It takes more than a dozen people to lift it." Jiang Yan commanded with a gesture.

The workers all looked at Jiang Yan with admiration, and the trolley became the "sacred vehicle" in their hearts.

......

Soon, the new factory was lined with brightly colored new precision machine tools, creating a lively scene. These machine tools will be used to produce high-precision key components and directly serve all walks of life.

After the factory was ready, Jiang Yan came to the office and began to look through the transcripts of previous assessments.

The workers who participated in the operation training stood out through layers of screening. Their operation skills are already quite good, and they can now be officially deployed to the new workshop. "It seems that they have all studied well and can start working." Jiang Yan looked at the passing scores on the report card and nodded with satisfaction.

However, switching from ordinary machine tools to precision machine tools still requires a certain amount of training and transition.

Therefore, Jiang Yan decided to show everyone a video of machine tool operation that he had previously recorded to give them an overview of the process. In addition, the relevant operation manual of the machine tool was also distributed to everyone.

"Comrades, please take your seats!" Jiang Yan led a group of people to the viewing room.

"Wow, we want to watch a movie!" several young men said excitedly.

"General Manager Jiang thinks we are working too hard, so he wants to enrich our spare time." An uncle said disapprovingly.

"Hush - everyone be quiet, it's about to begin!" Jiang Yan made a gesture and then ordered the video.

A brand new precision lathe appeared on the screen. Jiang Yan was operating it carefully and explaining step by step.

"I'll go, aren't you teaching us how to operate!"

"It turned out to be a training video. I thought I was going to watch a movie."

Only then did everyone realize that they had to study seriously, and everyone stared at the screen attentively.

In the video, the machine tool runs silky smooth and its movements are precise and smooth, which is far different from ordinary machine tools.

"This precision machine tool is too tall. I'm really not used to operating it." A middle-aged worker said, touching his chin.

"Yeah, it looks like this operation is too complicated. If we don't learn it carefully, we really can't do it." The young man next to him agreed.

"I heard that some CNC machine tools can be operated automatically, so no one needs to watch the workpieces being made." A man with a crew cut interjected.

"Okay, okay, stop saying a few words and concentrate on watching the video!" Jiang Yan reminded.

Everyone stopped talking and focused their attention on the screen.

While they were watching the video, Jiang Yan came to the work station and placed several rough parts that he had prepared before on the operating table.

These are simple chamfering, drilling and other operations, which are very suitable for beginners to practice on the machine.

Looking at these pieces of material, Jiang Yan nodded with satisfaction.

After a while, the video finished playing, and everyone poured out of the viewing room, talking about it.

"General Manager Jiang, I just recorded a few questions that I didn't understand, and I want to ask you for help later." A young man said excitedly.

"Okay, after I finish my demonstration, you can ask questions." Jiang Yan said with a smile.

"Attention everyone, I will give you a practical demonstration below."

Jiang Yan skillfully started the lathe and practiced on the rough parts.

Under his careful and precise operation, these simple workpieces took shape quickly.

"It's amazing! The director's operation is just like in the movie!"

"I feel a little dizzy just looking at it. This machine tool is too high-end!"

Everyone was stunned and screamed.

Jiang Yan turned off the lathe with satisfaction, turned around and said to everyone:
"What I demonstrated just now was a simple operation. I believe that through observation and learning, you will be able to get started quickly. I will come here today and ask questions if you don't understand anything."

Suddenly, seven or eight hands were raised, and each one asked excitedly.

(End of this chapter)