industrial lord

Chapter 19
After lunch, the rain eased a little, and Frederick came to the blacksmith shop in a carriage.

The carriage, which had just been fitted with bearings this morning, was running fast, and it didn't take long for it to leave the city.

When Frederick was 3 years old, he "slapped" and fell into the water beach on the road. His father immediately ordered all the sewers in the city to be cleaned and dredged regularly. Now there is not much water on the road, and there is no fear of splashing water. pedestrian.

The blacksmith's shop was in full swing as always, and the sound of "dang dang dang" striking iron could be heard from afar.

Ordinary blacksmiths forged the red-hot wrought iron bars and then used molds to shape them into cylinders, and then cut them into sections. Then Bryant and several excellent blacksmiths made the wrought iron bars into round cakes in the molds, and finally In another mold, special tools are used for ring punching, and the inner or outer ring blank of a bearing is ready, and then it is taken to a hydraulic lathe to process grooves.

On the other side, the thin wrought iron bars are also cut into pieces after being forged, and placed between two molds while they are still hot to form beads. At this time, the beads have a side, and some are not very round. They are taken away later. The grinding disc driven by the waterwheel can be rolled and ground to make a circle.

Frederick watched for a while before Ogilvy rushed over after receiving the notice.

The master asked about the recent bearing production situation before asking: "Yesterday you said that golem puppets can be covered with a layer of human-like skin? Can you tell me how to do it?"

Last night, Psyche said that Ogilvy said something that interested him. Frederick thought for a long time, and only the simulated skin of the artificial puppet came to mind.

He has a feeling that this material is what he needs.

"It's simple." Ogilvy said easily, "Chop up the crystal slime, remove the internal organs, put the meat in the pot, add some water, cover it, apply some wet mud to seal it, and smolder for a while When the water vapor washes away the lid, there will be a batter-like paste in the pot."

"Take out the paste, put it in a pot and cook until the water dries up, until it becomes sticky like snot, and when it cools down, it will become a soft glue like skin."

"To make the skin of a golem puppet, you only need to heat it in a pot and melt it, add some dye, and pour it into a mold to cool down."

"This kind of glue is not afraid of water. You see, I even applied a layer on the boots. When walking in the rain, I am not afraid of getting wet. The cloak is also waterproof after applying a layer."

As he spoke, he bent his toes and pointed to the shoes on his feet.

Frederick opened his mouth in surprise, can this thing replace rubber or plastic? !
"Where is this kind of glue now?" He said hastily, "Quick, show me!"

Ogilvy saw him so excited, his heart moved, he bent down and asked in a low voice: "Principal, is this very profitable?"

Scholars at Weissburg University are now infected with the problem of "looking at money", and he is no exception.

Frederick nodded slightly.

"Let's go!" Ogilvy became excited when he heard that he could make money, "BASF is cooking glue over there."

As soon as the words fell, there was a loud "bang" from the other side of the blacksmith shop.

BASF is a student of Ogilvy, in his early twenties. Many years ago, he stepped on a slime while walking at night and slipped and fell into the river. He became a laughing stock at school. Since then, his hobby has been tossing slimes in fancy ways.

Frederick came to the other side of the blacksmith's shop. There was a long row of sheds along the wall, with tables, chairs and stoves. It was a place for cooking and eating, and now it was used to cook slimes.

The minced transparent slime was boiled in a cloth bag by BASF. When the lid of the local pressure cooker flew away, a lot of water splashed out, and the slime meat dregs and paste remained in the bag, and it could be squeezed directly Squeeze the slime out.

Frederick narrowed his eyes slightly, thinking that many people have done things such as boiling slimes in water and burning slimes, but this did not happen. It is estimated that when the temperature exceeds the boiling point of water and the pressure increases. Components reacted with water.

BASF said hello to the principal, and then continued with his work.

The remaining water in the pot was poured into the grass outside the shed. The slime was squeezed into the pot, and the meat residue was thrown into the grass. The slime was quickly boiled dry in the pot and gradually turned into slime glue.

There are several cloaks hanging on the wall. I don’t know who they belong to. BASF used a brush to brush the hot slime glue in the pot on the cloaks. After cooling, a waterproof film was formed.

Frederick thought for a while, found an iron plate, asked BASF to paint a layer of slime glue on it, and peeled it off after cooling.

This piece of slime is about 1 mm thick, transparent and colorless, and it has good strength when pinched and pulled, but not much elasticity.

"Isn't the elasticity right?" Frederick asked, "Isn't it a bit hard to make skin?"

Ogilvy replied immediately: "When making skin, you need to add some pigments, and there will be some changes during the period."

BASF also said: "Adding different pigments or materials, these glues can become soft, hard or elastic."

Frederick let out an "oh", and continued to pull the slime in his hand, and it took a little effort to tear it apart.

"Is it poisonous?" He asked a most concerned question.

"It's not poisonous." BASF replied with a smile. "I used to take a small piece from a cold pot and throw it on the ground. A dog ate it. How did it get in and how did it come out?"

"Can it burn?" Frederick asked again.

At this moment, he was taken aback, smiled awkwardly, and threw a small piece of slime into the fire on the stove.

The slime glue melted immediately when it fell on the firewood, and then a lot of bubbles appeared, which seemed to be boiling, but there was no flame.

Frederick put the wood clip on the fire and heated it, then folded the remaining piece of slime glue on his hand, and clamped it with the hot clip again.

The high temperature on the clip makes the slime glue melt, and it solidifies after cooling, and the upper and lower pieces are fused together where the clip is held.

Pull it hard, it's tight.

Frederick nodded, sat down on the blacksmith's dining chair, and began to think about how to use this material.

If the slime can meet the requirements, rain gear, water shoes, tents, plastic bags and soft packaging cans can be made, and even the childcare artifact-the hanger is not a problem.

If a worker wants to benefit from his work, he must first sharpen his tools.

Among other things, at least this indigenous pressure cooker has to be replaced.

It is not a big problem to produce a serious pressure cooker. Its pre-skill is the relationship between air pressure and boiling point.

The sealing between the lid and the pot was originally a problem, but now it seems that slime glue can be used as a sealing ring, so this problem is not a big problem.

When Frederick came back to his senses, he found that Ogilvy and BASF had placed parchment, quills, ink bottles and drawing tools on the table, and he was waiting to create "the house of gold in the parchment" again The miracle was.

"BASF."

"exist!"

Just as Frederick called his name, BASF stood up straight like a soldier and answered.

"You make me a copy of each slime." Frederick arranged the work, "The sooner the better."

BASF immediately replied: "Yes!"

Ogilvy smiled and said to Frederick: "He originally planned to get married, but now he is worried about having no money. Naturally, he will not miss things that can make money."

Frederick also laughed and said, "Knowledge is gold coins."

Then he started drawing on the parchment.

The pot body and lid of the pressure cooker are not difficult, they can be cast and then forged to make it workable.

There are two ear buckles on the body of the pot. When working, buckle the beam on the pot cover. Rotate the screw in the middle of the beam to press the pot cover down. There is a slime sealing ring between the pot cover and the pot body. The row on the pot cover The air valve, weight and safety valve are not a big problem.

Then Friedrich once again pounced on the threading of the screw.

(End of this chapter)