Become a super arms dealer with the workshop system

Chapter 167 Skilled Workers

Although the hard work of renovating and cleaning the factory can be done by local people, and the installation and commissioning of equipment can also be done by engineers from Huaxia, but the final production and management still need to recruit employees from the northern coastal areas, so Han Feng Let Leng Jianfeng stay in charge of handling the affairs here in the factory area, and he took Popov back to Algiers.

"I heard that some local forces are unwilling to cooperate?" Prime Minister Majib asked quickly after seeing Han Feng.

"Yes, the factory area that Yiliji was going to provide to me was occupied by a group of people, but this matter has been resolved, and that group... realized their mistakes, decided to change their past, and start a new life. "Han Feng shrugged and replied briskly.

These words are not adulterated, it's just that Han Feng is making them physically human again.

"That's good. If the situation there is unstable, I can send a force to protect the safety of the factory." Majib obviously didn't know enough about the situation in the southeastern border. Although he knew what happened, he couldn't investigate it. The ins and outs, so after hearing Han Feng's answer, he breathed a sigh of relief and didn't think much about it.

Han Feng quickly waved his hand: "That's not necessary, Yiliji has a large land and few people, and the actions during this period of time have also given Xiao Xiao a little shock. It seems that it will enter a stable period of time. I am coming to Algiers this time. Well, I am also preparing to recruit employees for the new factory."

"Oh? The factory building, equipment, and water and electricity facilities are all ready?" Majib sat up straight suddenly, and looked at Han Feng with shocking pupils. He thought that these things would be delayed for at least a month or two. Time, and it turned out that it was basically done in less than a week.

"Well, Governor Mokhtar has given me a lot of support. As for the equipment, there is nothing too complicated to produce at present. Huaxia has complete sets. It has been shipped to Yiliji yesterday and the assembly and debugging have begun. .” Han Feng replied leisurely, while looking at the shocked Majibu next to him.

What is Huaxia Speed?.jpg
Tactical back.avi
"Well, this is indeed a bit... a bit unexpected." It took about half a minute for Majib to recover from the shock, and he took a sip from the water glass on the table: "I'll do it as quickly as possible for the staff. To deal with it, fortunately, we have done some publicity some time ago, and we can probably find dozens of experienced workers and an engineer for you, but for the rest, I am afraid that you have to go to technical schools and universities to find new people. "

It's no wonder that Majibu didn't have time to prepare. The reason why Hanfeng was able to achieve such fast efficiency was because the factory had been maintaining underground production for more than a year. The supporting equipment is innocent, so he directly kept it for his own use. In this way, the only thing to do is to renovate the building and install equipment, which is naturally much more efficient.

It's just that this kind of thing can't be said clearly.

Algeria's recruitment is similar to that of Huaxia, but this time Han Feng sat on the interview side.

Fortunately, the engineers and managers said that Han Feng himself did this in his previous life, so he can verify the level of these people through some engineering problems, and because Han Feng's first product is not technically in-depth, so there is plenty of time Gain experience for these people.

Assembly line workers are also simple, as long as you have a junior high school diploma and can do basic addition, subtraction, multiplication and division without any problems.

On the contrary, the process of recruiting skilled workers is more complicated.

No matter how simple the design is, it is not easy to turn it from a drawing into a real thing.

Algeria has licenses for skilled workers, but it does not have a comprehensive vocational qualification rating system, which means that it is impossible to distinguish junior workers from senior technician workers in a simple way.

This is very stiff.

As a student majoring in engineering, Han Feng has also participated in engineering practice, and even took advantage of that holiday to get a certificate, so that his eyes would not be smeared, but for a position like an operator, there is no way to test the authenticity through interviews and written tests. kung fu.

Fortunately, after Majib’s arrangement, Han Feng borrowed a factory in the suburbs of Algiers and set up an assessment point here. Prime Minister Majib also specially sent two knowledgeable secretaries to follow Han Feng to avoid coming to the assessment There were too many people, and Han Feng couldn't do it alone.

However, it turns out that both of them thought too much.

Starting at eight o'clock in the morning, a morning passed, and a total of two people came.

One of them couldn't even draw the assembly drawing of the tooling.

The other one, who seemed to be in his 40s, was technically qualified, but when he heard that he was going to work in Jeju, Yili, he left without looking back, leaving the three of them staring at each other.

Han Feng looked at the two people who came with him: "Didn't you say that the employment situation in your country is not optimistic in the past two years? A few days ago, there were huge crowds of people when recruiting people. What's the matter today?"

"Who did you recruit two days ago?" A voice sounded from behind. It was an engineer from the borrowed factory. In order to prevent them from destroying these precious machine tools in the workshop, he also served as a referee for scoring. Just been watching from behind.

"Engineers, as well as assembly line workers, there are many people applying for the job." Han Feng turned his head and looked at the other party.

"That's right, because the vast majority of Algeria are still low-end factories at present, there is no need for a few engineers, and there are many graduates, so many people can't find jobs, but skilled workers are different. Originally, the number is small, but there are many positions..."

Yes, Han Feng nodded to show that he understood, the whole world is the same in this respect, and there is a shortage of skilled workers.

"Would you like to have a meal first? The meal time in the cafeteria is almost over." The other party stood up and suggested.

"Okay, let's see if anyone comes this afternoon."

However, just as the three of Han Feng were about to get up, another figure appeared at the door.

"Excuse me, is the recruitment of BI Group here?"

Due to the backlight, Han Feng couldn't see what the person who came in was like, but the voice turned out to be a woman.

Algeria has achieved equality between men and women in education very early, and the proportion of women among university graduates even exceeds 50%, but it is indeed not common in the line of work of front-line workers.

"Yes, I am the person in charge of recruitment and the boss of BI Group." Han Feng sat down again, and instructed the secretary next to him to buy some meals in the cafeteria.

The person who came was wearing a delicate trousers and a lady's suit with a bag on his shoulders. It didn't look like a traditional worker's attire.

"My name is... my name is Harriet, and here is my resume."

Harid came to Han Feng, took out a file bag from her bag and handed it over.

"Houari Boumediene University of Technology?" Han Feng opened the graduation certificate in the bag, looked up at the woman in front of him: "Uh... our recruitment of engineers has ended yesterday."

"I know, but I am also a CNC machine tool operator, and the license is below." Harid pointed to the bag in Han Feng's hand, and the latter dug it out again, and found a mechanic's license.

"Very good, what we need to recruit is a CNC milling machine operator, do you have any work experience in this field?" Han Feng asked Harid to sit down on the chair in front of him.

"No." Harid shook her head generously: "Local companies don't like to recruit female technicians very much. They say that because there are too few women in this industry, it is inconvenient to manage, but I think if there is no first person, then There will never be more.”

"Okay, we need to conduct an assessment on you. The content is to process a workpiece on the spot with the machine tool behind." Han Feng pointed to the equipment behind him: "Also, let me remind you in advance that although our company is registered in Algiers, But the actual location of the factory is Eri Jeju in the southeast."

Harid obviously hesitated for a while, but didn't struggle for too long: "Yes, it doesn't matter to me to be a little bit remote, but I hope to at least have separate residences for men and women."

"Don't worry, according to the local policy, senior skilled workers will have separate residences..." Han Feng replied helplessly, it was hard for him to imagine what this girl had encountered in the past application process.

"That's all right, I'm ready to take the test." Harold said, reaching out to tie up her long hair, and then took out a baseball cap from her bag and put it on her head.

Han Feng nodded secretly in his heart, it seemed that at least his safety awareness was sufficient.

"This is the part drawing, and the 3D simulation drawing of the workpiece. The requirement is to conduct process analysis first, and then operate and process. The maximum time should not exceed 4 hours." Han Feng took out two drawings and handed them to Harid. A fairly complex thin-plate workpiece is not part of the satellite-guided glide kit, but is related to Han Feng's further plans.

Harid took the drawing, and the expression on his face gradually became serious. A few minutes later, he picked up the pencil and draft paper prepared on the table and began to write and draw on it.

Judging from her actions, Harid is indeed lacking in experience. The middle-aged technician even just glanced at it before starting to compile the processing program while talking about process analysis. But on the other hand, it also shows that she At least there is no problem with my theoretical foundation.

After about ten minutes, Harid finally put down the pen in his hand, stood up with the draft paper and drawings:

"The web thickness of the support part is only 2mm, and the area is large, and it is very easy to generate vibration during processing, which may make it difficult to meet the wall thickness tolerance and surface roughness requirements. After processing, the thickness and size of the parts vary greatly, except for the sector Outside the frame, other places have poor rigidity, so vacuum fixtures are used to reduce vibration, and small-diameter milling cutters are used to reduce cutting force."

"Choose the prefabricated 70H20 process hole on the bottom surface, the 7mm hole position and the process hole on the process lug as the positioning reference, that is, two holes on one side for positioning, and the corresponding fixture positioning component is two pins on one side, and a special transition vacuum for bracket parts is processed first. platform."

"Although the part looks complicated, it actually only needs three steps. First, mill the profile and fillet, second, mill the inner shape of the fan-shaped frame, and finally mill the outer shape and the 70mm hole. Can I start programming? ?”

Han Feng didn't see any problem. He turned his head and looked at the engineer next to him, who also nodded.

"Very well, you can start processing."

(End of this chapter)