Daguo Technology started from the Shanzhai system

Hearing this, Ni Guangnan's eyes lit up, and then he laughed and said:
"We really did this, and I'm afraid some caring people will jump their feet in anger."

Seeing this, Lin Chen also showed a faint smile.

The thoughtful people behind this wanted to pry into the secrets of their Shuguang five-axis machining center, but after going round and round they couldn't get it. They will probably be furious when the results come out.

After all, there must be a lot of cost and contacts in Daxia and the world to raise such a large-scale questioning of the fraud of Suguang's five-axis machining center.

After spending a huge amount of money but getting nothing, even being fooled, how could they not be so angry?

So as Lin Chen and Ni Guangnan made a decision, the official website of Shuguang R&D Center officially issued an announcement welcoming Matsuda Daisuke and other professors to visit.

"Hahaha……"

Seeing the news announcement of Sugon Semiconductor, a burst of smug laughter seemed to erupt in the general manager's office of the island country Sanryo Heavy Industries.

Obviously, this round of frenzy to question the fraud of Sugon's five-axis machining center is definitely related to them.

But how did they know that Lin Chen had already seen through the conspiracy and was ready to use his strength to treat them like monkeys?

Time passed slowly like this, and a few days passed in the blink of an eye. Domestic and foreign reporters also gathered outside the gate of the mechanical processing factory inside the Shuguang production base in Pengcheng.

That's right, Sugon Electronics is the real owner of Sugon's five-axis machining center, not Sugon Semiconductor or Sugon R&D Center.

After all, Sugon Semiconductor is mainly responsible for the production of chips, and Sugon R&D Center is mainly responsible for research and development tasks.

In this case, the task of processing and producing parts is naturally handed over to Sugon Electronics.

After all, the development direction of Suguang Electronics is a super-large comprehensive production group, and it is just right to entrust them to produce.

At this time, there are two Suguang five-axis machining centers in the Shuguang production base in Pengcheng, and the other two are in the Shuguang production base in Tianjin. That is to say, Suguang Electronics has a total of four Suguang five-axis machining centers.

Of course, in addition to this, there are four Shuguang five-axis machining centers in the hands of the Daxia Army, but it is not Lin Chen's business to ask where they are.

That is to say, there are currently only 8 Sugon five-axis machining centers in the world.

"Kacha Kacha Kacha Kacha Kacha..."

At this time, the flickering sound of the camera sounded in front of the gate of the mechanical processing factory inside the Shuguang production base in Pengcheng.

This machinery processing factory is the processing factory responsible for all metal parts processing tasks in the Pengcheng production base.

In the past, it was mainly responsible for processing some small metal parts of ultra-precision optical anti-shake lenses.

Now it has 2 sets of Shuguang five-axis machining centers, and officially has the processing and production capacity of "big parts".

So from now on, Sugon Electronics will have the production capacity of metal parts as small as optical image stabilization lens, as large as engine crankshaft and other large parts.

"Professor Matsuda Daisuke, what do you think of this test?"

An island country reporter at the scene asked Professor Matsuda Daisuke of Tokyo University.

In this regard, Professor Daisuke Matsuda raised his head slightly, and said with a confident look:

"My opinion is still the same as before. Even if the Sugon R&D Center dares to let us come to verify the authenticity, I still insist that the Sugon R&D Center is fake."

"Crack, click, click, click..."

After hearing Daisuke Matsuda's words, the reporters also pressed their cameras one after another.

Then the reporters at the scene asked other professors, and the answers they received were the same.

They all claimed that the Suguang R&D Center was a fake. Even if the Suguang R&D Center dared to invite them to visit and verify, they still insisted that the Suguang five-axis machining center was a fake.

Unless Suguang Technology shows them the internal structure of the Suguang five-axis machining center and lets them operate it by themselves...

However, when they were eloquent, what they didn't know was that they were about to become monkeys being played with.

Time passed quickly, and after Matsuda Daisuke and several professors from other countries attended, the authenticity test was officially held.

At this time, in the corridor outside the processing plant, Daisuke Matsuda looked at the huge machine in the room through the super large glass window and couldn't help showing a dignified expression.

But the moment he turned around, Daisuke Matsuda's solemn expression switched to arrogance.

He took out a document from his briefcase, looked at Chen Dong, the president of Shuguang Electronics, and said arrogantly:

"In order to prevent you from cheating, this is a blueprint of the "parts" jointly designed by several of our professors. I wonder if you at Sugon Technology dare to test it?"

"Why dare not?!"

Facing Daisuke Matsuda's radical approach, Chen Dong, the president of Sugon Electronics, said that there will be a good show to watch next.

So Chen Dong took the somewhat important blueprint and handed it over to the director of the nearby processing factory.

"Kacha Kacha Kacha Kacha Kacha..."

The flickering sound of the camera sounded at the scene, and the scene in front of him was photographed.

Many reporters with notebooks quickly wrote down the words of Daisuke Matsuda and Chen Dong, the president of Shuguang Electronics.

Of course, at the same time, they couldn't help but have curiosity in their eyes, not knowing what the final result would be.

I wonder if the Sugon five-axis machining center can process the "parts" jointly designed by Professors such as Daisuke Matsuda.

Of course, at the same time, they also expressed curiosity about what the "parts" were.

That "part" can be tested by Daisuke Matsuda, and its processing should be very difficult.

Unfortunately, the "parts" drawings have been taken away by the director of Shuguang Machinery Processing Factory, and reporters have no way of knowing what the "parts" look like.

So then they could only look in through the large glass windows in the corridor, and from time to time they would use cameras to take pictures of the inside through the glass.

Because Shuguang Technology did not allow them to visit at close range and could only look inside through the super large glass in the corridor, they naturally could only take pictures from a distance.

And what's more sad is that most of the huge machine is made of iron, and only the middle part of one side has an observation glass, so it's impossible to see what the internal structure of the machine is.

The reporters could barely see a large piece of metal that seemed to be being processed through the viewing glass in the middle, but they couldn't see clearly because the distance was too far.

Professor Matsuda Daisuke was quite dissatisfied with this, so he spoke loudly in front of many reporters and asked:
"Mr. Chen Dong, I think there is a possibility of fraud in this way. I think we should be allowed to visit your five-axis machining center up close."

"Yes, we can only see clearly in the corridor. In this case, there is a possibility that the "parts" may be subcontracted." (End of Chapter)